Factors associated with the technical quality of root canal fillings performed by undergraduate dental students in a Malaysian Dental School

Aim: A retrospective clinical audit was carried out on records of endodontic treatment performed by dental undergraduates. The audit was performed to evaluate the technical quality of root canal fillings performed by dental undergraduates and determine the associated factors. Methods: 140 records of patients who had received root canal treatment by dental undergraduates were evaluated through periapical radiographs by two examiners (κ =0.74). The root canal fillings had their quality evaluated according to extent, condensation and presence of procedural mishap. Possible factors associated with technical quality such as tooth type, canal curvature, student level and quality of record keeping were evaluated. Data were statistically analyzed using chi-square test (p<0.05). Results: Among the 140 root-filled teeth, acceptable extent, condensation and no-mishap were observed in 72.1%, 66.4% and 77.9% cases respectively. Overall, the technical quality of 68 (48.6%) root-filled teeth was considered acceptable. Overall, non-acceptable root canal fillings were significantly more likely to be observed in molars (69.2%), moderately and severely curved canals (71.4%) and junior students (61.5%). There was no association between acceptable root canal fillings and quality of record keeping. Conclusions: The technical quality of root canal fillings was acceptable in 48.6% cases and it was associated with tooth type, degree of canal curvature and student seniority.

Oral health quality of the workers of a telemarketing company and their satisfaction with the treatments provided by the corporative dental insurance plan

Aim: To evaluate the oral health quality of the workers of a telemarketing company and their satisfaction with the dental treatments provided by the corporative dental insurance plan. Methods: Data collection was by an online intranet questionnaire on dental service providers from Uberlândia/MG and Campinas/SP. It was addressed to 6000 associates, with objective and subjective questions, comprising the level of the telemarketing operators’ oral health, dental needs, satisfaction with dental care providers and the importance of having the laboral dental services provided by the company. Results: After analysis of the results, we observed that: 57.52% of the workers required improvement in their oral health and 56.03% mentioned prevention as the largest need, 66.70% use the dental providers’ services, but only 31.34% were satisfied with them. Conclusions: The results underscore that the workers have an intermediate level of dental needs, with prevention as top importance. Additionally, establishment of a basic attention program inside the company would increase the satisfaction and adhesion indexes of providers and the workers’ oral health.

Evaluation of hemosponge in promoting dental socket healing after 3rd mandibular premolar extraction in a feline model

Aim: To investigate the healing process following use of collagen sponges in the dental socket after extraction. Wound complications during the study were also evaluated. Methods: 32 cats were included in this study. IV administration of the combination of diazepam (0.22 mg/kg) and ketamine (10 mg/kg) was used to induce general anesthesia. Surgical extraction of both 3rd mandibular premolars was performed. The open dental sockets were divided in two groups. In Group A, the open dental socket on the left side was closed using 4-0 Monocryl in simple interrupted pattern. In Group B, the right dental socket was filled with lyophilized hydrolyzed collagen and the buccal and lingual flaps were sutured using 4-0 Monocryl and simple interrupted pattern. Meloxicam (0.2 mg/kg) was used to manage the post-extraction pain in all cats. Ampicilline 20 mg/kg was used as prophylaxis. The wounds were observed during the study to evaluate any signs of inflammation or dehiscence. Radiographs were taken to compare healing of the socket 3 weeks after the procedure. A 1 mm biopsy punch sample was taken from sockets in all cats for comparison of the healing in both groups. Results: Hemorrhage occurred only in the sockets of Group A. Remission of radiolucent area occurred in both groups. Mean score of inflammation was lower and mean scores of fibrotic reaction and fibroplasia were higher in Group B (p<0.05). Conclusions: Use of hemosponge in alveolar socket may accelerate fibroplasia and formation of the connective tissue and reduce inflammation after tooth extraction. Therefore, post-extraction use of the hemostatic agent in the dental socket is recommended.

Impact of dental caries on quality of life of adolescents according to access to oral health services: a cross sectional study

Aim: This study presents the prevalence of dental caries and its relation to the quality of life of adolescents according to the access to dental health services. Methods: Two hundred and fifty-six adolescents between 15 and 19 years of age participated in the study; they were all enrolled in public schools in a countryside municipality of the São Paulo State. Data related to dental caries were evaluated by the DMFT Index, and OHIP-14 was used for evaluating the quality of life. Mann Whitney and Spearmann correlation tests were also used (p<0.05). Results: A DMFT of 3.09 (±3.30) was found with a higher prevalence among the adolescents who used public dental services (3.43±3.34) compared with those who used private services (2.94±3.28). A statistically significant relationship between the decay component of DMFT with physical pain (0.020), physical disability (0.002) and quality of life (0.017) was verified. Conclusions: A low prevalence of dental caries was observed, and it was higher in adolescents who used public oral health services rather than private ones, evidencing the low influence of oral health on the quality of life of the participants.

Factors influencing dental appearance satisfaction in adolescents: a cross-sectional study conducted in Southern Brazil

The perception of dental aesthetic appearance may affect social interaction and psychological status, influencing dental needs and the search for treatments. Aim: To investigate the satisfaction with dental appearance and influencing factors among adolescents. Methods: The study was carried out among adolescents aged 14 to 19 years attending a private high school in Brazil. Data on demographic information, the perception of dental appearance, previous aesthetic treatments and wish to perform dental treatments were collected in the school. Data were analyzed using Pearson’s chi-square test or Linear Trend. Multivariate analysis was performed using the Poisson regression. Results: A total of 531 adolescents (Response rate = 98.3%) answered the questionnaire. The prevalence of dissatisfaction with dental appearance was 17.4%. Almost 65% had history of previous orthodontic treatment and 16% performed dental bleaching. Approximately 45% of children wished to undergo orthodontics and 54.8% to bleach their teeth. Dissatisfaction with dental appearance was associated with individuals unsatisfied with dental color (95% IC[1.73;4.32]), those perceiving poor dental alignment (PR3.16 95% IC[2.11;4.72]) and those wishing orthodontic treatment (PR2.9; 95% IC[1.79; 4.70]). Conclusions: The prevalence of dissatisfaction was considerable and was associated with aesthetic concerns such as tooth color, dental alignment and with the wish for orthodontics. In this young population, a large part of adolescents had already performed orthodontic and bleaching treatments and wished to perform those treatments again. Satisfaction with dental appearance could affect the adolescents’ behavior regarding search for dental treatment, thus causing possible overtreatment.

Salivary cortisol level and uncooperative behavior in pediatric dental practice

Aim: To investigate the relation between uncooperative behavior and salivary cortisol level in children who underwent preventive dental care. Methods: The sample was composed by 10 children of both sexes aged 40 to 52 months, presenting uncooperative behavior during dental preventive treatments. The saliva collection was performed using a cotton wheel and an Eppendorf tube (Sarstedt Salivete®) in 3 different moments: a) at home, on a day without dental treatment and at the same time on the day of the sessions treatment; b) 30 min after the end of the session, when there was manifestation of uncooperative behavior; c) 30 min after the end of the session, when there was a cooperative behavior of the child. A sample of saliva was centrifuged for 5 minutes at 2400 rpm, 1 of mL of saliva was pipetted in an Eppendorf tube and stored in a freezer at -20 ° C. For the determination of the levels of salivary cortisol was used an Active® kit for cortisol enzyme immunoassay (EIA) DSL-10-67100, composed of specific rabbit antibody anti-cortisol. Data were analyzed statistically for the uncooperative behavior issued in the beginning and at the end of sessions, using the paired t test (p<0.05) and for cortisol levels in saliva samples at home, after the beginning and at the end of sessions, using repeated-measures ANOVA and Tukey’s test (p<0.05). Results: During expression of uncooperative behavior in preventive dental care sessions the salivary cortisol level was significantly higher (0.65 ± 0.25 μg/dL) compared with expression of collaborative behavior (0.24 ± 0.10 μg/dL). Conclusions: It is possible to conclude that, even under preventive intervention, the stress must be controlled in order to reduce dental anxiety and fear.

Antimicrobial and bond strength properties of a dental adhesive containing zinc oxide nanoparticles

Aim: To assess the effect of adding zinc oxide nanoparticles to dental adhesives on their anti-microbial and bond strength properties. Methods: 45 human premolars were cut at the cement enamel junction (CEJ) and the crowns were sliced into buccal and lingual halves. The specimens were classified into three groups, etched with 37% phosphoric acid for 15 s and rinsed for 30 s. Single Bond, Single Bond+5% zinc oxide and Single Bond+10% zinc oxide were used in the first, second and third groups. A cylinder of Z250 composite was bonded and cured for 40 s. For anti-bacterial testing, 10 samples of each group were assessed by direct contact test; 10 μL of bacterial suspension was transferred into tubes containing adhesives and incubated for one hour; 300 μL of brain heart infusion (BHI) broth was added to each tube and after 12 h, 50 μL of bacteria and broth were spread on blood agar plates and incubated for 24 h. Results: The colony count decreased significantly in the second and third groups compared to the first. Conclusions: Incorporation of zinc oxide nanoparticles into dental adhesives increases their anti-microbial properties without affecting their bond strength.

Dentists’ actions about oral health of individuals with Down Syndrome

Aim: To investigate the knowledge and actions of dentists for treatment of individuals with Down syndrome. Methods: A questionnaire was applied to all the dentists (n=90) working at the FHS (Family Health Strategy) modules in the urban limits of Parnaíba, PI, Brazil. Four of the questions in the questionnaire were written according to the Theory of Planned Behavior Table and Likert scale (questions 6,7,9 and 15), in order to analyze the professionals’ intentions. Sixteen objective questions were elaborated with the purpose of collecting information about the degree of the dentists’ knowledge as regards the intention of attending courses in the patients with special needs area including DS, and interaction with other professionals and families. The option was to use a questionnaire applied to the dentists of the region, from August to November 2014. Results: It was found that most professionals were women and they considered themselves able to identify these patients. Among the professionals, 70% showed they had no difficulty in identifying the patient with DS, and 5.2% had no opinion about the subject. Only 6.6% of the professionals showed to be certain about their aptitude to attend to these patients; 70% were partially apt, that is, they were not absolutely sure about their aptness. There was a statistical relationship between the variables understanding and difficulty in the treatment. There was no statistical relationship between the variable capacity to identify, understanding of the needs and fitness variable in attendance. Conclusions: Patients with Down syndrome need more attention and care of dentists, they must also be involved in a multidisciplinary approach. Most of the professionals do not follow the procedures laid down by the Ministry of Health, but showed interest in attending a course in this area and there is a low number of SD patients being cared in Parnaíba, PI.

Effect of bleaching agents containing fluoride or calcium on enamel microhardness, roughness and permeability

Aim: To evaluate the effect of different in-office bleaching agents on the permeability, roughness and surface microhardness of human enamel. Methods: For evaluation of roughness and microhardness, 40 hemi-faces of 20 premolars were subjected to initial roughness (Ra parameter) and microhardness (VHN) measurements. Thirty-two premolar’s crowns were used for permeability test. Then, all specimens were randomly divided into four groups: C - without bleaching (control), HP35 - bleaching with 35% hydrogen peroxide (HP), HPF38 - 38% HP+fluoride, HPC35 - 35% HP+calcium. Final roughness (FR) and microhardness (FM) measurements were evaluated. For permeability, the 32 crowns were immersed in 1% sodium hypochlorite (20 min) and silver nitrate solutions (2 h) and subjected to developing solution under fluorescent light (16 h). Three sections from the crowns were analyzed in light microscope (100x) to evaluate the scores of permeability: Score 0 - no tracer agent penetration; Score 1 - less than half the thickness of enamel penetration; Score 2 - tracer agent reaching half the enamel thickness; Score 3 - entire enamel depth penetration, without reaching dentin and Score 4 - tracer agent reaching dentin. For roughness and microhardness evaluation were used one-way ANOVA and Dunnet post-test for independent samples, and t test for paired samples. For permeability, the data were analyzed by Kruskal Wallis and Dunn tests. Results: A significantly higher permeability and surface roughness were observed in groups HP35, HPF38 and HPC35 compared to the C group, as well as decreased microhardness (p<0.05). Conclusions: All bleaching agents increased permeability and surface roughness, and decreased microhardness of human enamel; thus, the addition of fluoride or calcium was not beneficial.

Color stability and surface roughness of artificial teeth brushed with an experimental Ricinus communis toothpaste

Aim: To evaluate, in vitro, the effect of brushing with a Ricinus communis -based experimental toothpaste on color stability and surface roughness of artificial teeth. Methods: Ninety artificial teeth (maxillary central incisors) in different shades, light and dark (NatusDent Triple Pressing, Dentbras) were used. Initial color (Spectrophotometer Easyshade, VITA) and surface roughness (Rugosimeter Surfcorder SE 1700, Kosakalab) readouts were performed. After baseline measurements, samples were assigned to 10 groups (n=9) according to the artificial tooth shade and type of toothpaste used during the mechanical brushing test (Pepsodent, MAVTEC): Sorriso Dentes Brancos – SDB, Colgate Luminous White - CLW (Colgate-Palmolive), Close up White Now - CWN (Unilever), Trihydral - THL (Perland Pharmacos) and Ricinus communis - RCE (Experimental). After 29,200 cycles of brushing, corresponding to 2 years of brushing by a healthy individual, new color and roughness readouts of the specimens were performed. Data (before and after the tests) were statistically analyzed (2-way repeated measures ANOVA, Tukey, p<0.05). Results: RCE toothpaste produced the greatest color stability for dark tooth shade and the second best color stability for light tooth shade. For surface roughness alteration, there was no difference (p>0.05) for any tested toothpaste regardless of tooth shade. Conclusions: The experimental Ricinus communis toothpaste did not cause color and surface roughness alteration in the artificial teeth, and it may be considered a suitable option for denture cleaning.

Influence of shade, curing mode, and aging on the color stability of resin cements

The color stability of resin cements is essential for aesthetic restorations. Aim: To evaluate the influence of shade and aging time on the color stability of two light-cured and two dual-cured resin cements. Methods: The CIE-Lab color parameters (n=6) were measured immediately after sample preparation and at 7, 30 and 90 days of aging in distilled water. The color difference (ΔE) was calculated and then analyzed by three-way ANOVA for repeated measures and Tukey’s HSD test (α=0.05). Results: ΔE was higher for transparent resin colors, followed by dark and light colors. The mean values of ΔE were lower for both light-cured resin cements compared to the dual-cured cements. As the aging time increased, ΔE values increased. Conclusions: The light-cured resin cements showed greater color stability. The lighter shades of luting were more likely to display a greater color change.

In vitro effects of erosive challenge on the surface properties of sealants

Aim: To assess in vitro the surface roughness (Ra), Vickers hardness (VHN) and surface morphology of resin and glass ionomer materials used for sealants after dynamic erosive challenge. Methods: Twenty specimens of each material were prepared and divided into experimental (erosive challenge) and control groups (n=10): Protect Riva (SDI), Opallis Flow (3M ESPE), Fluroshield (Dentsply), Filtek Z350 XT Flow (3M ESPE). The erosive challenge was performed 4 times per day (90 s) in cola drink and for 2 h in artificial saliva for 7 days. The control specimens were maintained in artificial saliva. Ra and VHN readings were performed before and after erosion. The percentage of hardness loss (%VHN) was obtained after erosion. The surface morphology was evaluated by scanning electron microscopy (SEM). The data were analyzed by ANOVA, Tukey and paired t tests (α=0.05). Results: After erosion and saliva immersion, there was an increase in Ra values for all groups and Riva group showed the highest Ra values. After erosive challenge, Riva and Filtek groups showed significant decrease in VHN values, but Filtek group showed the greatest %VHN. For all groups there was inorganic particle protrusion and matrix degradation after erosion visualized by SEM images. Conclusions: Erosive challenge affected the surface properties of all materials used as sealants, particularly in the Riva and Filtek groups.

Perception of HIV among pregnant women in the public health system in two municipalities of the state of São Paulo

Aim: To verify the knowledge of pregnant women on mother-to-child transmission (MTCT) of HIV, the availability of HIV tests in the public health system and counseling on the disease in two cities, Birigui and Piacatu, São Paulo State, Brazil. Methods: This is a descriptive and exploratory research using as samples, the files of 141 pregnant women attending the Basic Health Unit. Data were collected by survey, followed by a semi-structured questionnaire with open and closedend questions. Data were analyzed on Epi Info™ 7.1.4, by the Chi-square and Exact Fisher tests. Results: From all the 141 pregnant women, 119 were interviewed and 92.4% reported to have been informed about the need of taking the HIV test during prenatal exams. However, only 5.9% were counseled and 20.2% reported to be aware of how to prevent MTCT of HIV, usually mentioning lactation suppression and prescribed medication. The association between the knowledge about how to prevent MTCT of HIV and some social, demographic and economic variables like ethnics, educational level, home location, occupation, age and parenting was not verified. Conclusions: It is necessary to advise pregnant women on the importance of taking the HIV test regardless of the examination outcome, which was not observed in the cities where the research was conducted.

Clinical evaluation of two materials in the restoration of abfraction lesions

Aim: To evaluate the clinical performance of a composite resin (CR) and a resin-modified glassionomer cement (RMGIC) for the treatment of abfraction lesions. Methods: Thirty patients with abfraction lesions in at least two premolar teeth were selected and invited to participate in this study. All restorations were made within the same clinical time frame. One tooth was restored with CR Z100TM (3M, St. Paul, MN, USA), and the other was restored with RMGIC VitremerTM (3M). The restorations were assessed immediately and 1, 6 and 12 months after the restoration, using modified US Public Health Service (USPHS) criteria: marginal integrity, marginal discoloration, wear, retention, secondary caries and hypersensitivity. The statistical analysis was based on Friedman ANOVA test and Mann-Whitney test, considering p<0.05 for statistical significance. Results: Both materials demonstrated satisfactory clinical performance after one year. In the individual analysis of each material, there was a significant difference (p<0.05) in the criteria marginal integrity and wear, for both CR and RMGIC. RMGIC exhibited more damage one year after the restoration. Comparing both materials, it was found a significant difference only for marginal discoloration, while the RMGIC restorations showed the worst prognosis after a year of evaluation. There was no significant difference in the number of retentions, caries or hypersensitivity between CR and RMGIC. Conclusions: It was concluded that CR exhibited the best clinical performance according to the cost-effectiveness and evaluation criteria used in this study.

Incidence and classification of bifid mandibular canals using cone beam computed tomography

Aim: To determine the prevalence and classification of bifid mandibular canals using cone beam computed tomography (CBCT). Methods: The sample comprised 300 CBCT scans obtained from the Radiology and Imaging Department database at São Leopoldo Mandic Dental School, Campinas, SP, Brazil. All images were performed on Classic I-Cat® CBCT scanner, with standardized voxel at 0.25 mm and 13 cm FOV (field of view). From an axial slice (0.25 mm) a guiding plane was drawn along the alveolar ridge in order to obtain a cross-section. Results: Among 300 patients, 188 (62.7%) were female and 112 (37.3%) were male, aged between 13 to 87 years. Changes in the mandibular canal were observed in 90 patients, 30.0% of the sample, 51 women (56.7%) and 39 men (43.3%). Regarding affected sides, 32.2% were on the right and 24.5% on the left, with 43.3% bilateral cases. Conclusions: According to the results obtained in this study, a prevalence of 30% of bifid mandibular canals was found, with the most prevalent types classified as B (mesial direction) and bilateral.