2 resultados para Water quality monitoring
em Bioline International
Resumo:
Some physiochemical properties of water quality of Otamiri-oche River which runs through Imeh, Edegelem and Chokocho Communities in Etche ethnic nationality of Rivers State, Nigeria were investigated. Samples were collected in triplicate from the three different locations along the river in both rainy and dry seasons. Each sampling points is located 500m away from the successive one, and the samples were taken from the open river at the zone extending beyond the shoreline. Samples were stored in ice packs and immediately taken to the laboratory to investigate some selected physico-chemical characteristics. Also, bacteriological study was carried out on the samples. The laboratory results of the selected physico-chemical parameters when compared with the world health organization (WHO) standard showed that all the selected physico-chemical parameters were within the world health organization (WHO) permissible in both rainy and dry season except pH. For rainy season, the pH values were 5.00±0.00, 5.40 ±0.40, and 5.40± 0.30 for Imeh, Edegelem and Chokocho respectively. For the dry season, the pH values were 5.83± 0.01, 5.56±0.01, 5.90±0.01 for Imeh, Edegelem and Chokocho respectively. Also magnesium hardness exceeded the World Health Organization (WHO) permissible limit in rainy season only. The results of bacteriological study showed that all the sampling locations contained high numbers of coliform bacteria in both rainy and dry seasons. The number of coliform bacteria during rainy season was 25.00±0.00, 25.00±0.00, and 35.00±0.00 for Imeh, Edegelem and Chokocho respectively. Those of dry season were 93.00±3.55, 56.66±4.49, and 35.60±4.17 for Imeh, Edegelem and Chokocho respectively. The difference between the rainy and dry season was tested statistically using the t-test. The results of the statistical analyses showed a significant difference (p<0.05) between the rainy and dry seasons.
Resumo:
Twenty one sampling locations were assessed for carbon monoxide (CO), carbondioxide (CO2), oxygen (O2), sulphur dioxide (SO2), nitrogen dioxide (NO2), nitrogen oxide (NO), suspended particulate matter (SPM) and noise level using air pollutants measurement methods approved by ASTM for each specific parameter. All equipments and meters were all properly pre-calibrated before each usage for quality assurance. Findings of the study showed that measured levels of noise (61.4 - 101.4 dBA), NO (0.0 - 3.0 ppm), NO2 (0.0 - 3.0 ppm), CO (1.0 – 42.0 ppm) and SPM (0.14 – 4.82 ppm) in all sampling areas were quite high and above regulatory limits however there was no significant difference except in SPM (at all the sampling points), and noise, NO2 and NO (only in major traffic intersection). Air quality index (AQI) indicates that the ambient air can be described as poor for SPM, varied from good to very poor for CO, while NO and NO2 are very good except at major traffic intersection where they were both poor and very poor (D-E). The results suggest that strict and appropriate vehicle emission management, industrial air pollution control coupled with close burning management of wastes should be considered in the study area to reduce the risks associated with these pollutants.