Ionized cluster beam deposition, and thin film analysis

In 1972 the ionized cluster beam (ICB) deposition technique was introduced as a new method for thin film deposition. At that time the use of clusters was postulated to be able to enhance film nucleation and adatom surface mobility, resulting in high quality films. Although a few researchers reported singly ionized clusters containing 10$\sp2$-10$\sp3$ atoms, others were unable to repeat their work. The consensus now is that film effects in the early investigations were due to self-ion bombardment rather than clusters. Subsequently in recent work (early 1992) synthesis of large clusters of zinc without the use of a carrier gas was demonstrated by Gspann and repeated in our laboratory. Clusters resulted from very significant changes in two source parameters. Crucible pressure was increased from the earlier 2 Torr to several thousand Torr and a converging-diverging nozzle 18 mm long and 0.4 mm in diameter at the throat was used in place of the 1 mm x 1 mm nozzle used in the early work. While this is practical for zinc and other high vapor pressure materials it remains impractical for many materials of industrial interest such as gold, silver, and aluminum. The work presented here describes results using gold and silver at pressures of around 1 and 50 Torr in order to study the effect of the pressure and nozzle shape. Significant numbers of large clusters were not detected. Deposited films were studied by atomic force microscopy (AFM) for roughness analysis, and X-ray diffraction.^ Nanometer size islands of zinc deposited on flat silicon substrates by ICB were also studied by atomic force microscopy and the number of atoms/cm$\sp2$ was calculated and compared to data from Rutherford backscattering spectrometry (RBS). To improve the agreement between data from AFM and RBS, convolution and deconvolution algorithms were implemented to study and simulate the interaction between tip and sample in atomic force microscopy. The deconvolution algorithm takes into account the physical volume occupied by the tip resulting in an image that is a more accurate representation of the surface.^ One method increasingly used to study the deposited films both during the growth process and following, is ellipsometry. Ellipsometry is a surface analytical technique used to determine the optical properties and thickness of thin films. In situ measurements can be made through the windows of a deposition chamber. A method for determining the optical properties of a film, that is sensitive only to the growing film and accommodates underlying interfacial layers, multiple unknown underlayers, and other unknown substrates was developed. This method is carried out by making an initial ellipsometry measurement well past the real interface and by defining a virtual interface in the vicinity of this measurement. ^

The relationship of thymulin activity, immune parameters of HIV disease progression and substance use in a cohort of HIV seropositive alcohol and drug users

Zinc is essential for the activity of thymulin, a thymic hormone involved in T-lymphocyte differentiation and activation. Zinc deficiency is widespread in populations with HIV infection, and HIV+ drug users are particularly susceptible to zinc deficiency and immune suppression. This dissertation explored the relationship of zinc-bound active thymulin to plasma zinc, CD4+ and CD8+ cell count, the CD4+/CD8+ ratio, and drug use in HIV-infected drug users. Zinc-bound active thymulin was assessed in plasma of HIV+ drug users who were participating in a 30 month zinc supplementation trial. Plasma from 80 participants at the 12 month visit, and 40 of these same participants, randomly selected, at the baseline visit were assessed for zinc-bound active thymulin levels using a modification of the rosette inhibition assay. Thymulin activity was directly associated with CD4+ cell count (β = 0.127, p = 0.002) and inversely associated with cocaine use (β = −0.908, p = 0.026; R2 = 0.188, p = 0.019) independent of HIV viral load, age, gender and antiretroviral use. An increase in thymulin activity was 1.4 times more likely when CD4+ cell count increased (OR = 1.402, 95%CI: 1.006–1.956), independent of change in viral load, antiretroviral use, and age. Participants who used cocaine consistently, were 7.6 times less likely to have an increase in thymulin activity (OR = 0.133, 95%CI: 0.017–1.061). There was a direct correlation between change in plasma zinc and change in zinc-bound active thymulin (r = 0.243, p = 0.13). Analysis of CD4+ cell count decline in 222 participants in the zinc supplementation trial across the 30 months showed that both crack cocaine use and heavy alcohol use accelerated CD4+ cell count decline. Thymulin activity is directly associated with HIV disease progression, measured by CD4+ cell count, and is depressed with cocaine use independent of antiretroviral use and HIV viral load. Cocaine and heavy alcohol accelerate CD4+ cell count decline. The effect of cocaine on thymic output requires further evaluation as a mechanism for the association of cocaine use with faster HIV disease progression.

Application and evaluation of an Institute of Medicine approach to dietary assessment and planning in long -term care

The primary purpose of these studies was to determine the effect of planning menus using the Institute of Medicine's (IOMs) Simple Nutrient Density Approach on nutrient intakes of long-term care (LTC) residents. In the first study, nutrient intakes of 72 subjects were assessed using Dietary Reference Intakes (DRIs) and IOM methodology. The intake distributions were used to set intake and menu planning goals. In the second study, the facility's regular menus were modified to meet the intake goals for vitamin E, magnesium, zinc, vitamin D and calcium. An experiment was used to test whether the modified menu resulted in intakes of micronutrients sufficient to achieve a low prevalence (<3%) of nutrient inadequacies. Three-day weighed food intakes for 35 females were adjusted for day-to-day variations in order to obtain an estimate of long-term average intake and to estimate the proportion of residents with inadequate nutrient intakes. ^ In the first study, the prevalence of inadequate intakes was determined to be between 65-99% for magnesium, vitamin E, and zinc. Mean usual intakes of Vitamin D and calcium were far below the Adequate Intakes (AIs). In the experimental study, the prevalence of inadequacies was reduced to <3% for zinc and vitamin E but not magnesium. The groups' mean usual intake from the modified menu met or exceeded the AI for calcium but fell short for vitamin D. Alternatively, it was determined that addition of a multivitamin and mineral (MVM) supplement to intakes of the regular menu could be used to achieve goals for vitamin E, zinc and vitamin D but not calcium and magnesium. ^ A combination of menu modification and MVM supplementation may be necessary to achieve a low prevalence of micronutrient inadequacies among LTC residents. Menus should be planned to optimize intakes of those nutrients that are low in an MVM, such as calcium, magnesium, and potassium. A MVM supplement should be provided to fill the gap for nutrients not provided in sufficient amounts by the diet, such as vitamin E and vitamin D. ^

An Investigation on Biocompatibility of Bio-Absorbable Polymer Coated Magnesium Alloys

Advances in biomaterials have enabled medical practitioners to replace diseased body parts or to assist in the healing process. In situations where a permanent biomaterial implant is used for a temporary application, additional surgeries are required to remove these implants once the healing process is complete, which increases medical costs and patient morbidity. Bio-absorbable materials dissolve and are metabolized by the body after the healing process is complete thereby negating additional surgeries for removal of implants. Magnesium alloys as novel bio-absorbable biomaterials, have attracted great attention recently because of their good mechanical properties, biocompatibility and corrosion rate in physiological environments. However, usage of Mg as biodegradable implant has been limited by its poor corrosion resistance in the physiological solutions. An optimal biodegradable implant must initially have slow degradation to ensure total mechanical integrity then degrade over time as the tissue heals. The current research focuses on surface modification of Mg alloy (MZC) by surface treatment and polymer coating in an effort to enhance the corrosion rate and biocompatibility. It is envisaged that the results obtained from this investigation would provide the academic community with insights for the utilization of bio-absorbable implants particularly for patients suffering from atherosclerosis. The alloying elements used in this study are zinc and calcium both of which are essential minerals in the human metabolic and healing processes. A hydrophobic biodegradable co-polymer, polyglycolic-co-caprolactone (PGCL), was used to coat the surface treated MZC to retard the initial degradation rate. Two surface treatments were selected: (a) acid etching and (b) anodization to produce different surface morphologies, roughness, surface energy, chemistry and hydrophobicity that are pivotal for PGCL adhesion onto the MZC. Additionally, analyses of biodegradation, biocompatibility, and mechanical integrity were performed in order to investigate the optimum surface modification process, suitable for biomaterial implants. The study concluded that anodization created better adhesion between the MZC and PGCL coating. Furthermore, PGCL coated anodized MZC exhibited lower corrosion rate, good mechanical integrity, and better biocompatibility as compared with acid etched.