Enhanced zinc oxide and graphene nanostructures for electronics and sensing applications

Zinc oxide and graphene nanostructures are important technological materials because of their unique properties and potential applications in future generation of electronic and sensing devices. This dissertation investigates a brief account of the strategies to grow zinc oxide nanostructures (thin film and nanowire) and graphene, and their applications as enhanced field effect transistors, chemical sensors and transparent flexible electrodes. Nanostructured zinc oxide (ZnO) and low-gallium doped zinc oxide (GZO) thin films were synthesized by a magnetron sputtering process. Zinc oxide nanowires (ZNWs) were grown by a chemical vapor deposition method. Field effect transistors (FETs) of ZnO and GZO thin films and ZNWs were fabricated by standard photo and electron beam lithography processes. Electrical characteristics of these devices were investigated by nondestructive surface cleaning, ultraviolet irradiation treatment at high temperature and under vacuum. GZO thin film transistors showed a mobility of ∼5.7 cm2/V·s at low operation voltage of <5 V and a low turn-on voltage of ∼0.5 V with a sub threshold swing of ∼85 mV/decade. Bottom gated FET fabricated from ZNWs exhibit a very high on-to-off ratio (∼106) and mobility (∼28 cm2/V·s). A bottom gated FET showed large hysteresis of ∼5.0 to 8.0 V which was significantly reduced to ∼1.0 V by the surface treatment process. The results demonstrate charge transport in ZnO nanostructures strongly depends on its surface environmental conditions and can be explained by formation of depletion layer at the surface by various surface states. A nitric oxide (NO) gas sensor using single ZNW, functionalized with Cr nanoparticles was developed. The sensor exhibited average sensitivity of ∼46% and a minimum detection limit of ∼1.5 ppm for NO gas. The sensor also is selective towards NO gas as demonstrated by a cross sensitivity test with N2, CO and CO2 gases. Graphene film on copper foil was synthesized by chemical vapor deposition method. A hot press lamination process was developed for transferring graphene film to flexible polymer substrate. The graphene/polymer film exhibited a high quality, flexible transparent conductive structure with unique electrical-mechanical properties; ∼88.80% light transmittance and ∼1.1742Ω/sq k sheet resistance. The application of a graphene/polymer film as a flexible and transparent electrode for field emission displays was demonstrated.

Enabling adaptability in service aggregates using transparent shaping techniques

Distributed applications are exposed as reusable components that are dynamically discovered and integrated to create new applications. These new applications, in the form of aggregate services, are vulnerable to failure due to the autonomous and distributed nature of their integrated components. This vulnerability creates the need for adaptability in aggregate services. The need for adaptation is accentuated for complex long-running applications as is found in scientific Grid computing, where distributed computing nodes may participate to solve computation and data-intensive problems. Such applications integrate services for coordinated problem solving in areas such as Bioinformatics. For such applications, when a constituent service fails, the application fails, even though there are other nodes that can substitute for the failed service. This concern is not addressed in the specification of high-level composition languages such as that of the Business Process Execution Language (BPEL). We propose an approach to transparently autonomizing existing BPEL processes in order to make them modifiable at runtime and more resilient to the failures in their execution environment. By transparent introduction of adaptive behavior, adaptation preserves the original business logic of the aggregate service and does not tangle the code for adaptive behavior with that of the aggregate service. The major contributions of this dissertation are: first, we assessed the effectiveness of BPEL language support in developing adaptive mechanisms. As a result, we identified the strengths and limitations of BPEL and came up with strategies to address those limitations. Second, we developed a technique to enhance existing BPEL processes transparently in order to support dynamic adaptation. We proposed a framework which uses transparent shaping and generative programming to make BPEL processes adaptive. Third, we developed a technique to dynamically discover and bind to substitute services. Our technique was evaluated and the result showed that dynamic utilization of components improves the flexibility of adaptive BPEL processes. Fourth, we developed an extensible policy-based technique to specify how to handle exceptional behavior. We developed a generic component that introduces adaptive behavior for multiple BPEL processes. Fifth, we identify ways to apply our work to facilitate adaptability in composite Grid services.