An analytical investigation into shear wall and slab interconnections between reinforced concrete modules for high -rise buildings utilising modular construction under extreme seismic and wind loading

This research investigates a new structural system utilising modular construction. Five-sided boxes are cast on-site and stacked together to form a building. An analytical model was created of a typical building in each of two different analysis programs utilising the finite element method (Robot Millennium and ETABS). The pros and cons of both Robot Millennium and ETABS are listed at several key stages in the development of an analytical model utilising this structural system. Robot Millennium was initially utilised but created an analytical model too large to be successfully run. The computation requirements were too large for conventional computers. Therefore Robot Millennium was abandoned in favour of ETABS, whose more simplistic algorithms and assumptions permitted running this large computation model. Tips are provided as well as pitfalls signalled throughout the process of modelling such complex buildings of this type. ^ The building under high seismic loading required a new horizontal shear mechanism. This dissertation has proposed to create a secondary floor that ties to the modular box through the use of gunwales, and roughened surfaces with epoxy coatings. In addition, vertical connections necessitated a new type of shear wall. These shear walls consisted of waffled external walls tied through both reinforcement and a secondary concrete pour. ^ This structural system has generated a new building which was found to be very rigid compared to a conventional structure. The proposed modular building exhibited a period of 1.27 seconds, which is about one-fifth of a conventional building. The maximum lateral drift occurs under seismic loading with a magnitude of 6.14 inches which is one-quarter of a conventional building's drift. The deflected shape and pattern of the interstorey drifts are consistent with those of a coupled shear wall building. In conclusion, the computer analysis indicate that this new structure exceeds current code requirements for both hurricane winds and high seismic loads, and concomitantly provides a shortened construction time with reduced funding. ^

Characteristics of surface-water flows in the ridge and slough landscape of Everglades National Park: implications for particulate transport

Over the last one hundred years, compartmentalization and water management activities have reduced water flow to the ridge and slough landscape of the Everglades. As a result, the once corrugated landscape has become topographically and vegetationally uniform. The focus of this study was to quantify variation in surface flow in the ridge and slough landscape and to relate flow conditions to particulate transport and deposition. Over the 2002–2003 and 2003–2004 wet seasons, surface velocities and particulate accumulation were measured in upper Shark River Slough in Everglades National Park. Landscape characteristics such as elevation, plant density and biomass also were examined to determine their impact on flow characteristics and material transport. The results of this study demonstrate that the release of water during the wet season not only increases water levels, but also increased flow speeds and particulate transport and availability. Further, flow speeds were positively and significantly correlated with water level thereby enhancing particulate transport in sloughs relative to ridges especially during peak flow periods. Our results also indicate that the distribution of biomass in the water column, including floating plants and periphyton, affects velocity magnitude and shape of vertical profiles, especially in the sloughs where Utricularia spp. and periphyton mats are more abundant. Plot clearing experiments suggest that the presence of surface periphyton and Utricularia exert greater control over flow characteristics than the identity (i.e., sawgrass or spike rush) or density of emergent macrophytes, two parameters frequently incorporated into models describing flow through vegetated canopies. Based on these results, we suggest that future modeling efforts must take the presence of floating biomass, such as Utricularia, and presence of periphyton into consideration when describing particulate transport.

Evaluation of non-contact sampling and detection of explosives using receiver operating characteristic curves

The growing need for fast sampling of explosives in high throughput areas has increased the demand for improved technology for the trace detection of illicit compounds. Detection of the volatiles associated with the presence of the illicit compounds offer a different approach for sensitive trace detection of these compounds without increasing the false positive alarm rate. This study evaluated the performance of non-contact sampling and detection systems using statistical analysis through the construction of Receiver Operating Characteristic (ROC) curves in real-world scenarios for the detection of volatiles in the headspace of smokeless powder, used as the model system for generalizing explosives detection. A novel sorbent coated disk coined planar solid phase microextraction (PSPME) was previously used for rapid, non-contact sampling of the headspace containers. The limits of detection for the PSPME coupled to IMS detection was determined to be 0.5-24 ng for vapor sampling of volatile chemical compounds associated with illicit compounds and demonstrated an extraction efficiency of three times greater than other commercially available substrates, retaining >50% of the analyte after 30 minutes sampling of an analyte spike in comparison to a non-detect for the unmodified filters. Both static and dynamic PSPME sampling was used coupled with two ion mobility spectrometer (IMS) detection systems in which 10-500 mg quantities of smokeless powders were detected within 5-10 minutes of static sampling and 1 minute of dynamic sampling time in 1-45 L closed systems, resulting in faster sampling and analysis times in comparison to conventional solid phase microextraction-gas chromatography-mass spectrometry (SPME-GC-MS) analysis. Similar real-world scenarios were sampled in low and high clutter environments with zero false positive rates. Excellent PSPME-IMS detection of the volatile analytes were visualized from the ROC curves, resulting with areas under the curves (AUC) of 0.85-1.0 and 0.81-1.0 for portable and bench-top IMS systems, respectively. Construction of ROC curves were also developed for SPME-GC-MS resulting with AUC of 0.95-1.0, comparable with PSPME-IMS detection. The PSPME-IMS technique provides less false positive results for non-contact vapor sampling, cutting the cost and providing an effective sampling and detection needed in high-throughput scenarios, resulting in similar performance in comparison to well-established techniques with the added advantage of fast detection in the field.

Three essays on the economics of defense contracting, output and income inequality

This dissertation analyzes both the economics of the defense contracting process and the impact of total dollar obligations on the economies of U.S. states. Using various econometric techniques, I will estimate relationships across individual contracts, state level output, and income inequality. I will achieve this primarily through the use of a dataset on individual contract obligations. ^ The first essay will catalog the distribution of contracts and isolate aspects of the process that contribute to contract dollar obligations. Accordingly, this study describes several characteristics about individual defense contracts, from 1966-2006: (i) the distribution of contract dollar obligations is extremely rightward skewed, (ii) contracts are unevenly distributed in a geographic sense across the United States, (iii) increased duration of a contract by 10 percent is associated with an increase in costs by 4 percent, (iv) competition does not seem to affect dollar obligations in a substantial way, (v) contract pre-payment financing increases the obligation of contracts from anywhere from 62 to 380 percent over non-financed contracts. ^ The second essay will turn to an aggregate focus, and look the impact of defense spending on state economic output. The analysis in chapter two attempts to estimate the state level fiscal multiplier, deploying Difference-in-Differences estimation as an attempt to filter out potential endogeneity bias. Interstate variation in procurement spending facilitates utilization of a natural experiment scenario, focusing on the spike in relative spending in 1982. The state level relative multiplier estimate here is 1.19, and captures the short run, impact effect of the 1982 spending spike. ^ Finally I will look at the relationship between defense contracting and income inequality. Military spending has typically been observed to have a negative relationship with income inequality. The third chapter examines the existence of this relationship, combining data on defense procurement with data on income inequality at the state level, in a longitudinal analysis across the United States. While the estimates do not suggest a significant relationship exists for the income share of the top ten percent of households, there is a significant positive relationship for the income share of top one percent households for an increase in defense procurement.^

Three Essays on the Economics of Defense Contracting, Output and Income Inequality

This dissertation analyzes both the economics of the defense contracting process and the impact of total dollar obligations on the economies of U.S. states. Using various econometric techniques, I will estimate relationships across individual contracts, state level output, and income inequality. I will achieve this primarily through the use of a dataset on individual contract obligations. The first essay will catalog the distribution of contracts and isolate aspects of the process that contribute to contract dollar obligations. Accordingly, this study describes several characteristics about individual defense contracts, from 1966-2006: (i) the distribution of contract dollar obligations is extremely rightward skewed, (ii) contracts are unevenly distributed in a geographic sense across the United States, (iii) increased duration of a contract by 10 percent is associated with an increase in costs by 4 percent, (iv) competition does not seem to affect dollar obligations in a substantial way, (v) contract pre-payment financing increases the obligation of contracts from anywhere from 62 to 380 percent over non-financed contracts. The second essay will turn to an aggregate focus, and look the impact of defense spending on state economic output. The analysis in chapter two attempts to estimate the state level fiscal multiplier, deploying Difference-in-Differences estimation as an attempt to filter out potential endogeneity bias. Interstate variation in procurement spending facilitates utilization of a natural experiment scenario, focusing on the spike in relative spending in 1982. The state level relative multiplier estimate here is 1.19, and captures the short run, impact effect of the 1982 spending spike. Finally I will look at the relationship between defense contracting and income inequality. Military spending has typically been observed to have a negative relationship with income inequality. The third chapter examines the existence of this relationship, combining data on defense procurement with data on income inequality at the state level, in a longitudinal analysis across the United States. While the estimates do not suggest a significant relationship exists for the income share of the top ten percent of households, there is a significant positive relationship for the income share of top one percent households for an increase in defense procurement.