Development of safety performance functions for SafetyAnalyst applications in Florida

In 2010, the American Association of State Highway and Transportation Officials (AASHTO) released a safety analysis software system known as SafetyAnalyst. SafetyAnalyst implements the empirical Bayes (EB) method, which requires the use of Safety Performance Functions (SPFs). The system is equipped with a set of national default SPFs, and the software calibrates the default SPFs to represent the agency's safety performance. However, it is recommended that agencies generate agency-specific SPFs whenever possible. Many investigators support the view that the agency-specific SPFs represent the agency data better than the national default SPFs calibrated to agency data. Furthermore, it is believed that the crash trends in Florida are different from the states whose data were used to develop the national default SPFs. In this dissertation, Florida-specific SPFs were developed using the 2008 Roadway Characteristics Inventory (RCI) data and crash and traffic data from 2007-2010 for both total and fatal and injury (FI) crashes. The data were randomly divided into two sets, one for calibration (70% of the data) and another for validation (30% of the data). The negative binomial (NB) model was used to develop the Florida-specific SPFs for each of the subtypes of roadway segments, intersections and ramps, using the calibration data. Statistical goodness-of-fit tests were performed on the calibrated models, which were then validated using the validation data set. The results were compared in order to assess the transferability of the Florida-specific SPF models. The default SafetyAnalyst SPFs were calibrated to Florida data by adjusting the national default SPFs with local calibration factors. The performance of the Florida-specific SPFs and SafetyAnalyst default SPFs calibrated to Florida data were then compared using a number of methods, including visual plots and statistical goodness-of-fit tests. The plots of SPFs against the observed crash data were used to compare the prediction performance of the two models. Three goodness-of-fit tests, represented by the mean absolute deviance (MAD), the mean square prediction error (MSPE), and Freeman-Tukey R2 (R2FT), were also used for comparison in order to identify the better-fitting model. The results showed that Florida-specific SPFs yielded better prediction performance than the national default SPFs calibrated to Florida data. The performance of Florida-specific SPFs was further compared with that of the full SPFs, which include both traffic and geometric variables, in two major applications of SPFs, i.e., crash prediction and identification of high crash locations. The results showed that both SPF models yielded very similar performance in both applications. These empirical results support the use of the flow-only SPF models adopted in SafetyAnalyst, which require much less effort to develop compared to full SPFs.

Development of Safety Performance Functions for SafetyAnalyst Applications in Florida

In 2010, the American Association of State Highway and Transportation Officials (AASHTO) released a safety analysis software system known as SafetyAnalyst. SafetyAnalyst implements the empirical Bayes (EB) method, which requires the use of Safety Performance Functions (SPFs). The system is equipped with a set of national default SPFs, and the software calibrates the default SPFs to represent the agency’s safety performance. However, it is recommended that agencies generate agency-specific SPFs whenever possible. Many investigators support the view that the agency-specific SPFs represent the agency data better than the national default SPFs calibrated to agency data. Furthermore, it is believed that the crash trends in Florida are different from the states whose data were used to develop the national default SPFs. In this dissertation, Florida-specific SPFs were developed using the 2008 Roadway Characteristics Inventory (RCI) data and crash and traffic data from 2007-2010 for both total and fatal and injury (FI) crashes. The data were randomly divided into two sets, one for calibration (70% of the data) and another for validation (30% of the data). The negative binomial (NB) model was used to develop the Florida-specific SPFs for each of the subtypes of roadway segments, intersections and ramps, using the calibration data. Statistical goodness-of-fit tests were performed on the calibrated models, which were then validated using the validation data set. The results were compared in order to assess the transferability of the Florida-specific SPF models. The default SafetyAnalyst SPFs were calibrated to Florida data by adjusting the national default SPFs with local calibration factors. The performance of the Florida-specific SPFs and SafetyAnalyst default SPFs calibrated to Florida data were then compared using a number of methods, including visual plots and statistical goodness-of-fit tests. The plots of SPFs against the observed crash data were used to compare the prediction performance of the two models. Three goodness-of-fit tests, represented by the mean absolute deviance (MAD), the mean square prediction error (MSPE), and Freeman-Tukey R2 (R2FT), were also used for comparison in order to identify the better-fitting model. The results showed that Florida-specific SPFs yielded better prediction performance than the national default SPFs calibrated to Florida data. The performance of Florida-specific SPFs was further compared with that of the full SPFs, which include both traffic and geometric variables, in two major applications of SPFs, i.e., crash prediction and identification of high crash locations. The results showed that both SPF models yielded very similar performance in both applications. These empirical results support the use of the flow-only SPF models adopted in SafetyAnalyst, which require much less effort to develop compared to full SPFs.

An analysis of teachers' perceptions of informal science professional development

Science professional development, which is fundamental to science education improvement, has been described as being weak and fragmentary. The purpose of this study was to investigate teachers' perceptions of informal science professional development to gain an in-depth understanding of the essence of the phenomenon and related science-teaching dispositions. Based on the frameworks of phenomenology, constructivism, and adult learning theory, the focus was on understanding how the phenomenon was experienced within the context of teachers' everyday world. ^ Data were collected from eight middle-school teachers purposefully selected because they had participated in informal programs during Project TRIPS (Teaching Revitalized Through Informal Programs in Science), a collaboration between the Miami-Dade school district, government agencies (including NASA), and non-profit organizations (including Audubon of Florida). In addition, the teachers experienced hands-on labs offered through universities (including the University of Arizona), field sites, and other agencies. ^ The study employed Seidman's (1991) three-interview series to collect the data. Several methods were used to enhance the credibility of the research, including using triangulation of the data. The interviews were transcribed, color-coded and organized into six themes that emerged from the data. The themes included: (a) internalized content knowledge, (b) correlated hands-on activities, (c) enhanced science-teaching disposition, (d) networking/camaraderie, (e) change of context, and (f) acknowledgment as professionals. The teachers identified supportive elements and constraints related to each theme. ^ The results indicated that informal programs offering experiential learning opportunities strengthened understanding of content knowledge. Teachers implemented hands-on activities that were explicitly correlated to their curriculum. Programs that were conducted in a relaxed context enhanced teachers' science-teaching dispositions. However, a lack of financial and administrative support, perceived safety risks, insufficient reflection time, and unclear itineraries impeded program implementation. The results illustrated how informal educators can use this cohesive model as they develop programs that address the supports and constraints to teachers' science instruction needs. This, in turn, can aid teachers as they strive to provide effective science instruction to students; notions embedded in reforms. Ultimately, this can affect how learners develop the ability to make informed science decisions that impact the quality of life on a global scale. ^

Investigation of the causes of serious injury and fatal crashes: An analysis using econometric models

The rate of fatal crashes in Florida has remained significantly higher than the national average for the last several years. The 2003 statistics from the National Highway Traffic Safety Administration (NHTSA), the latest available, show a fatality rate in Florida of 1.71 per 100 million vehicle-miles traveled compared to the national average of 1.48 per 100 million vehicle-miles traveled. The objective of this research is to better understand the driver, environmental, and roadway factors that affect the probability of injury severity in Florida. ^ In this research, the ordered logit model was used to develop six injury severity models; single-vehicle and two-vehicle crashes on urban freeways and urban principal arterials and two-vehicle crashes at urban signalized and unsignalized intersections. The data used in this research included all crashes that occurred on the state highway system for the period from 2001 to 2003 in the Southeast Florida region, which includes the Miami-Dade, Broward and Palm Beach Counties.^ The results of the analysis indicate that the age group and gender of the driver at fault were significant factors of injury severity risk across all models. The greatest risk of severe injury was observed for the age groups 55 to 65 and 66 and older. A positive association between injury severity and the race of the driver at fault was also found. Driver at fault of Hispanic origin was associated with a higher risk of severe injury for both freeway models and for the two-vehicle crash model on arterial roads. A higher risk of more severe injury crash involvement was also found when an African-American was the at fault driver on two-vehicle crashes on freeways. In addition, the arterial class was also found to be positively associated with a higher risk of severe crashes. Six-lane divided arterials exhibited the highest injury severity risk of all arterial classes. The lowest severe injury risk was found for one way roads. Alcohol involvement by the driver at fault was also found to be a significant risk of severe injury for the single-vehicle crash model on freeways. ^

Achieving zero accidents—A strategic framework for continuous safety improvement in the construction industry

In the U.S., construction accidents remain a significant economic and social problem. Despite recent improvement, the Construction industry, generally, has lagged behind other industries in implementing safety as a total management process for achieving zero accidents and developing a high-performance safety culture. One aspect of this total approach to safety that has frustrated the construction industry the most has been “measurement”, which involves identifying and quantifying the factors that critically influence safe work behaviors. The basic problem attributed is the difficulty in assessing what to measure and how to measure it—particularly the intangible aspects of safety. Without measurement, the notion of continuous improvement is hard to follow. This research was undertaken to develop a strategic framework for the measurement and continuous improvement of total safety in order to achieve and sustain the goal of zero accidents, while improving the quality, productivity and the competitiveness of the construction industry as it moves forward. The research based itself on an integral model of total safety that allowed decomposition of safety into interior and exterior characteristics using a multiattribute analysis technique. Statistical relationships between total safety dimensions and safety performance (measured by safe work behavior) were revealed through a series of latent variables (factors) that describe the total safety environment of a construction organization. A structural equation model (SEM) was estimated for the latent variables to quantify relationships among them and between these total safety determinants and safety performance of a construction organization. The developed SEM constituted a strategic framework for identifying, measuring, and continuously improving safety as a total concern for achieving and sustaining the goal of zero accidents.

Overcoming Barriers to Restaurant Food Safety

Food safety is critical to the success of restaurants. Yet current methods of controling foodborne illness are inadequate, including time and temperature control, safe food handling procedures, good employee hygiene, cleaning and sanitizing techniques, and Hazard Analysis and Critical Control Points (HACCP) plan. Several barriers to food safety in restaurants are identified and recommendations for management are suggested.

AIDS workplace *policy adoption and implementation in local government: An analysis of departmental variation

This is an empirical study whose purpose was to examine the process of innovation adoption as an adaptive response by a public organization and its subunits existing under varying degrees of environmental uncertainty. Meshing organization innovation research and contingency theory to form a theoretical framework, an exploratory case study design was undertaken in a large, metropolitan government located in an area with the fourth highest prevalence rate of HIV/AIDS in the country. A number of environmental and organizational factors were examined for their influence upon decision making in the adoption/non-adoption as well as implementation of any number of AIDS-related policies, practices, and programs.^ The major findings of the study are as follows. For the county government itself (macro level), no AIDS-specific workplace policies have been adopted. AIDS activities (AIDS education, AIDS Task Force, AIDS Coordinator, etc.), adopted county-wide early in the epidemic, have all been abandoned. Worker infection rates, in the aggregate and throughout the epidemic have been small. As a result, absent co-worker conflict (isolated and negligible), no increase in employee health care costs, no litigation regarding discrimination, and no major impact on workforce productivity, AIDS has basically become a non-issue at the strategic core of the organization. At the departmental level, policy adoption decisions varied widely. Here the predominant issue is occupational risk, i.e., both objective as well as perceived. As expected, more AIDS-related activities (policies, practices, and programs) were found in departments with workers known to have significant risk for exposure to the AIDS virus (fire rescue, medical examiner, police, etc.). AIDS specific policies, in the form of OSHA's Bloodborn Pathogen Standard, took place primarily because they were legislatively mandated. Union participation varied widely, although not necessarily based upon worker risk. In several departments, the union was a primary factor bringing about adoption decisions. Additional factors were identified and included organizational presence of AIDS expertise, availability of slack resources, and the existence of a policy champion. Other variables, such as subunit size, centralization of decision making, and formalization were not consistent factors explaining adoption decisions. ^

Improved Criteria for Estimating Calibration Factors for Highway Safety Manual (HSM) Applications

The Highway Safety Manual (HSM) estimates roadway safety performance based on predictive models that were calibrated using national data. Calibration factors are then used to adjust these predictive models to local conditions for local applications. The HSM recommends that local calibration factors be estimated using 30 to 50 randomly selected sites that experienced at least a total of 100 crashes per year. It also recommends that the factors be updated every two to three years, preferably on an annual basis. However, these recommendations are primarily based on expert opinions rather than data-driven research findings. Furthermore, most agencies do not have data for many of the input variables recommended in the HSM. This dissertation is aimed at determining the best way to meet three major data needs affecting the estimation of calibration factors: (1) the required minimum sample sizes for different roadway facilities, (2) the required frequency for calibration factor updates, and (3) the influential variables affecting calibration factors. In this dissertation, statewide segment and intersection data were first collected for most of the HSM recommended calibration variables using a Google Maps application. In addition, eight years (2005-2012) of traffic and crash data were retrieved from existing databases from the Florida Department of Transportation. With these data, the effect of sample size criterion on calibration factor estimates was first studied using a sensitivity analysis. The results showed that the minimum sample sizes not only vary across different roadway facilities, but they are also significantly higher than those recommended in the HSM. In addition, results from paired sample t-tests showed that calibration factors in Florida need to be updated annually. To identify influential variables affecting the calibration factors for roadway segments, the variables were prioritized by combining the results from three different methods: negative binomial regression, random forests, and boosted regression trees. Only a few variables were found to explain most of the variation in the crash data. Traffic volume was consistently found to be the most influential. In addition, roadside object density, major and minor commercial driveway densities, and minor residential driveway density were also identified as influential variables.