Empirical study of exchange rates in Brazil, Canada and the Caribbean

This dissertation examines the monetary models of exchange rate determination for Brazil, Canada, and two countries in the Caribbean, namely, the Dominican Republic and Jamaica. With the exception of Canada, the others adopted the floating regime during the past ten years.^ The empirical validity of four seminal models in exchange rate economics were determined. Three of these models were entirely classical (Bilson and Frenkel) or Keynesian (Dornbusch) in nature. The fourth model (Real Interest Differential Model) was a mixture of the two schools of economic theory.^ There is no clear empirical evidence of the validity of the monetary models. However, the signs of the coefficients of the nominal interest differential variable were as predicted by the Keynesian hypothesis in the case of Canada and as predicted by the Chicago theorists in the remaining countries. Moreover, in case of Brazil, due to hyperinflation, the exchange rate is heavily influenced by domestic money supply.^ I also tested the purchasing power parity (PPP) for this same set of countries. For both the monetary as well as the PPP hypothesis, I tested for co-integration and applied ordinary least squares estimation procedure. The error correction model was also used for the PPP model, to determine convergence to equilibrium.^ The validity of PPP is also questionable for my set of countries. Endogeinity among the regressors as well as the lack of proper price indices are the contributing factors. More importantly, Central Bank intervention negate rapid adjustment of price and exchange rates to their equilibrium value. However, its forecasting capability for the period 1993-1994 is superior compared to the monetary models in two of the four cases.^ I conclude that in spite of the questionable validity of these models, the monetary models give better results in the case of the "smaller" economies like the Dominican Republic and Jamaica where monetary influences swamp the other determinants of exchange rate. ^

Power and influence in joint venture relationships and their impact on performance

The purpose of this research was to apply the concepts of power and influence tactics to the joint venture context by examining how they relate to venture performance. In addition, culture and the expectations of future cooperation were examined for their association with influence tactic use and joint venture performance. Data were collected from 58 parent firms of U.S.-based domestic and international joint ventures about their relationships with their partners.^ Under the theories of social exchange and power dependence, a parent's level of power is based on its partner's dependence on the relationship. The statistical results indicated that: (1) the greater the total of power of both parents in an equal power relationship, the greater the joint venture's performance; and (2) the greater the inequality between each parent's level of power, the lower the joint venture's performance. It was also found that the way in which a parent firm tried to influence its partner was related to joint venture performance. Specifically, the use of references to a partner's legitimate authority was negatively related to performance, while the use of rational arguments and compromises was positively related.^ Contrary to expectations, the cultural backgrounds of the parents were not shown to have a relationship to influence tactic use or joint venture's performance. On the other hand, greater expectation of future cooperation had a positive association with performance, and a significant relationship with influence tactic use. The greater the expectation, the less partners used more confrontational tactics such as pressure or legitimate authority. ^

Computational modeling of intermediate temperature proton exchange membrane (PEM) fuel cells

A two-phase three-dimensional computational model of an intermediate temperature (120--190°C) proton exchange membrane (PEM) fuel cell is presented. This represents the first attempt to model PEM fuel cells employing intermediate temperature membranes, in this case, phosphoric acid doped polybenzimidazole (PBI). To date, mathematical modeling of PEM fuel cells has been restricted to low temperature operation, especially to those employing Nafion ® membranes; while research on PBI as an intermediate temperature membrane has been solely at the experimental level. This work is an advancement in the state of the art of both these fields of research. With a growing trend toward higher temperature operation of PEM fuel cells, mathematical modeling of such systems is necessary to help hasten the development of the technology and highlight areas where research should be focused.^ This mathematical model accounted for all the major transport and polarization processes occurring inside the fuel cell, including the two phase phenomenon of gas dissolution in the polymer electrolyte. Results were presented for polarization performance, flux distributions, concentration variations in both the gaseous and aqueous phases, and temperature variations for various heat management strategies. The model predictions matched well with published experimental data, and were self-consistent.^ The major finding of this research was that, due to the transport limitations imposed by the use of phosphoric acid as a doping agent, namely low solubility and diffusivity of dissolved gases and anion adsorption onto catalyst sites, the catalyst utilization is very low (∼1--2%). Significant cost savings were predicted with the use of advanced catalyst deposition techniques that would greatly reduce the eventual thickness of the catalyst layer, and subsequently improve catalyst utilization. The model also predicted that an increase in power output in the order of 50% is expected if alternative doping agents to phosphoric acid can be found, which afford better transport properties of dissolved gases, reduced anion adsorption onto catalyst sites, and which maintain stability and conductive properties at elevated temperatures.^

Development of hardware in the loop real-time control techniques for hybrid power systems involving distributed demands and sustainable energy sources

The future power grid will effectively utilize renewable energy resources and distributed generation to respond to energy demand while incorporating information technology and communication infrastructure for their optimum operation. This dissertation contributes to the development of real-time techniques, for wide-area monitoring and secure real-time control and operation of hybrid power systems. ^ To handle the increased level of real-time data exchange, this dissertation develops a supervisory control and data acquisition (SCADA) system that is equipped with a state estimation scheme from the real-time data. This system is verified on a specially developed laboratory-based test bed facility, as a hardware and software platform, to emulate the actual scenarios of a real hybrid power system with the highest level of similarities and capabilities to practical utility systems. It includes phasor measurements at hundreds of measurement points on the system. These measurements were obtained from especially developed laboratory based Phasor Measurement Unit (PMU) that is utilized in addition to existing commercially based PMU’s. The developed PMU was used in conjunction with the interconnected system along with the commercial PMU’s. The tested studies included a new technique for detecting the partially islanded micro grids in addition to several real-time techniques for synchronization and parameter identifications of hybrid systems. ^ Moreover, due to numerous integration of renewable energy resources through DC microgrids, this dissertation performs several practical cases for improvement of interoperability of such systems. Moreover, increased number of small and dispersed generating stations and their need to connect fast and properly into the AC grids, urged this work to explore the challenges that arise in synchronization of generators to the grid and through introduction of a Dynamic Brake system to improve the process of connecting distributed generators to the power grid.^ Real time operation and control requires data communication security. A research effort in this dissertation was developed based on Trusted Sensing Base (TSB) process for data communication security. The innovative TSB approach improves the security aspect of the power grid as a cyber-physical system. It is based on available GPS synchronization technology and provides protection against confidentiality attacks in critical power system infrastructures. ^