Development of surface flaw thresholds for pre-cured fiber reinforced polymer and groove size tolerance for near surface mounted fiber reinforced polymer retrofit systems

Since the introduction of fiber reinforced polymers (FRP) for the repair and retrofit of concrete structures in the 1980’s, considerable research has been devoted to the feasibility of their application and predictive modeling of their performance. However, the effects of flaws present in the constitutive components and the practices in substrate preparation and treatment have not yet been thoroughly studied. This research aims at investigating the effect of surface preparation and treatment for the pre-cured FRP systems and the groove size tolerance for near surface mounted (NSM) FRP systems; and to set thresholds for guaranteed system performance. This study was conducted as part of the National Cooperative Highway Research Program (NCHRP) Project 10-59B to develop construction specifications and process control manual for repair and retrofit of concrete structures using bonded FRP systems. The research included both analytical and experimental components. The experimental program for the pre-cured FRP systems consisted of a total of twenty-four (24) reinforced concrete (RC) T-beams with various surface preparation parameters and surface flaws, including roughness, flatness, voids and cracks (cuts). For the NSM FRP systems, a total of twelve (12) additional RC T-beams were tested with different grooves sizes for FRP bars and strips. The analytical program included developing an elaborate nonlinear finite element model using the general purpose software ANSYS. The bond interface between FRP and concrete was modeled by a series of nonlinear springs. The model was validated against test data from the present study as well as those available from the literature. The model was subsequently used to extend the experimental range of parameters for surface flatness in pre-cured FRP systems and for groove size study in the NSM FRP systems. Test results, confirmed by further analyses, indicated that contrary to the general belief in the industry, the impact of surface roughness on the global performance of pre-cured FRP systems was negligible. The study also verified that threshold limits set for wet lay-up FRP systems can be extended to pre-cured systems. The study showed that larger surface voids and cracks (cuts) can adversely impact both the strength and ductility of pre-cured FRP systems. On the other hand, frequency (or spacing) of surface cracks (cuts) may only affect system ductility rather than its strength. Finally, within the range studied, groove size tolerance of ±1/8 in. does not appear to have an adverse effect on the performance of NSM FRP systems.

A methodology to estimate time varying user responses to travel time and travel time reliability in a road pricing environment

Road pricing has emerged as an effective means of managing road traffic demand while simultaneously raising additional revenues to transportation agencies. Research on the factors that govern travel decisions has shown that user preferences may be a function of the demographic characteristics of the individuals and the perceived trip attributes. However, it is not clear what are the actual trip attributes considered in the travel decision- making process, how these attributes are perceived by travelers, and how the set of trip attributes change as a function of the time of the day or from day to day. In this study, operational Intelligent Transportation Systems (ITS) archives are mined and the aggregated preferences for a priced system are extracted at a fine time aggregation level for an extended number of days. The resulting information is related to corresponding time-varying trip attributes such as travel time, travel time reliability, charged toll, and other parameters. The time-varying user preferences and trip attributes are linked together by means of a binary choice model (Logit) with a linear utility function on trip attributes. The trip attributes weights in the utility function are then dynamically estimated for each time of day by means of an adaptive, limited-memory discrete Kalman filter (ALMF). The relationship between traveler choices and travel time is assessed using different rules to capture the logic that best represents the traveler perception and the effect of the real-time information on the observed preferences. The impact of travel time reliability on traveler choices is investigated considering its multiple definitions. It can be concluded based on the results that using the ALMF algorithm allows a robust estimation of time-varying weights in the utility function at fine time aggregation levels. The high correlations among the trip attributes severely constrain the simultaneous estimation of their weights in the utility function. Despite the data limitations, it is found that, the ALMF algorithm can provide stable estimates of the choice parameters for some periods of the day. Finally, it is found that the daily variation of the user sensitivities for different periods of the day resembles a well-defined normal distribution.

Cuba’s Role in Venezuela’s Control of the Internet and Online Social Networks

The arrival of Cuba’s Information Technology (IT) and Communications Minister Ramiro Valdés to Venezuela in the Spring of 2010 to serve as a ‘consultant’ to the Venezuelan government awakened a new reality in that country. Rampant with deep economic troubles, escalating crime, a murder rate that has doubled since Chávez took over in 1999, and an opposition movement led by university students and other activists who use the Internet as their primary weapon, Venezuela has resorted to Cuba for help. In a country where in large part traditional media outlets have been censored or are government-controlled, the Internet and its online social networks have become the place to obtain, as well as disseminate, unfiltered information. As such, Internet growth and use of its social networks has skyrocketed in Venezuela, making it one of Latin America’s highest Web users. Because of its increased use to spark political debate among Venezuelans and publish information that differs with the official government line, Chávez has embarked on an initiative to bring the Internet to the poor and others who would otherwise not have access, by establishing government-sponsored Internet Info Centers throughout the country, to disseminate information to his followers. With the help of Cuban advisors, who for years have been a part of Venezuela’s defense, education, and health care initiatives, Chávez has apparently taken to adapting Cuba’s methodology for the control of information. He has begun to take special steps toward also controlling the type of information flowing through the country’s online social networks, considering the implementation of a government-controlled single Internet access point in Venezuela. Simultaneously, in adapting to Venezuela’s Internet reality, Chávez has engaged online by creating his own Twitter account in an attempt to influence public opinion, primarily of those who browse the Web. With a rapidly growing following that may soon reach one million subscribers, Chávez claims to have set up his own online trench to wage cyber space battle.