Periodic polymer photonic bandgap structures for on-chip optical cavities

Integrated on-chip optical platforms enable high performance in applications of high-speed all-optical or electro-optical switching, wide-range multi-wavelength on-chip lasing for communication, and lab-on-chip optical sensing. Integrated optical resonators with high quality factor are a fundamental component in these applications. Periodic photonic structures (photonic crystals) exhibit a photonic band gap, which can be used to manipulate photons in a way similar to the control of electrons in semiconductor circuits. This makes it possible to create structures with radically improved optical properties. Compared to silicon, polymers offer a potentially inexpensive material platform with ease of fabrication at low temperatures and a wide range of material properties when doped with nanocrystals and other molecules. In this research work, several polymer periodic photonic structures are proposed and investigated to improve optical confinement and optical sensing. We developed a fast numerical method for calculating the quality factor of a photonic crystal slab (PhCS) cavity. The calculation is implemented via a 2D-FDTD method followed by a post-process for cavity surface energy radiation loss. Computational time is saved and good accuracy is demonstrated compared to other published methods. Also, we proposed a novel concept of slot-PhCS which enhanced the energy density 20 times compared to traditional PhCS. It combines both advantages of the slot waveguide and photonic crystal to localize the high energy density in the low index material. This property could increase the interaction between light and material embedded with nanoparticles like quantum dots for active device development. We also demonstrated a wide range bandgap based on a one dimensional waveguide distributed Bragg reflector with high coupling to optical waveguides enabling it to be easily integrated with other optical components on the chip. A flexible polymer (SU8) grating waveguide is proposed as a force sensor. The proposed sensor can monitor nN range forces through its spectral shift. Finally, quantum dot - doped SU8 polymer structures are demonstrated by optimizing spin coating and UV exposure. Clear patterns with high emission spectra proved the compatibility of the fabrication process for applications in optical amplification and lasing.

Design, fabrication, and evaluation of on-chip micro-supercapacitors

Due to the increasing demand for high power and reliable miniaturized energy storage devices, the development of micro-supercapacitors or electrochemical micro-capacitors have attracted much attention in recent years. This dissertation investigates several strategies to develop on-chip micro-supercapacitors with high power and energy density. Micro-supercapacitors based on interdigitated carbon micro-electrode arrays are fabricated through carbon microelectromechanical systems (C-MEMS) technique which is based on carbonization of patterned photoresist. To improve the capacitive behavior, electrochemical activation is performed on carbon micro-electrode arrays. The developed micro-supercapacitors show specific capacitances as high as 75 mFcm-2 at a scan rate of 5 mVs -1 after electrochemical activation for 30 minutes. The capacitance loss is less than 13% after 1000 cyclic voltammetry (CV) cycles. These results indicate that electrochemically activated C-MEMS micro-electrode arrays are promising candidates for on-chip electrochemical micro-capacitor applications. The energy density of micro-supercapacitors was further improved by conformal coating of polypyrrole (PPy) on C-MEMS structures. In these types of micro-devices the three dimensional (3D) carbon microstructures serve as current collectors for high energy density PPy electrodes. The electrochemical characterizations of these micro-supercapacitors show that they can deliver a specific capacitance of about 162.07 mFcm-2 and a specific power of 1.62mWcm -2 at a 20 mVs-1 scan rate. Addressing the need for high power micro-supercapacitors, the application of graphene as electrode materials for micro-supercapacitor was also investigated. The present study suggests a novel method to fabricate graphene-based micro-supercapacitors with thin film or in-plane interdigital electrodes. The fabricated micro-supercapacitors show exceptional frequency response and power handling performance and could effectively charge and discharge at rates as high as 50 Vs-1. CV measurements show that the specific capacitance of the micro-supercapacitor based on reduced graphene oxide and carbon nanotube composites is 6.1 mFcm -2 at scan rate of 0.01Vs-1. At a very high scan rate of 50 Vs-1, a specific capacitance of 2.8 mFcm-2 (stack capacitance of 3.1 Fcm-3) is recorded. This unprecedented performance can potentially broaden the future applications of micro-supercapacitors.

System-on-a-Chip (SoC) based hardware acceleration in Register Transfer Level (RTL) design

Today, modern System-on-a-Chip (SoC) systems have grown rapidly due to the increased processing power, while maintaining the size of the hardware circuit. The number of transistors on a chip continues to increase, but current SoC designs may not be able to exploit the potential performance, especially with energy consumption and chip area becoming two major concerns. Traditional SoC designs usually separate software and hardware. Thus, the process of improving the system performance is a complicated task for both software and hardware designers. The aim of this research is to develop hardware acceleration workflow for software applications. Thus, system performance can be improved with constraints of energy consumption and on-chip resource costs. The characteristics of software applications can be identified by using profiling tools. Hardware acceleration can have significant performance improvement for highly mathematical calculations or repeated functions. The performance of SoC systems can then be improved, if the hardware acceleration method is used to accelerate the element that incurs performance overheads. The concepts mentioned in this study can be easily applied to a variety of sophisticated software applications. The contributions of SoC-based hardware acceleration in the hardware-software co-design platform include the following: (1) Software profiling methods are applied to H.264 Coder-Decoder (CODEC) core. The hotspot function of aimed application is identified by using critical attributes such as cycles per loop, loop rounds, etc. (2) Hardware acceleration method based on Field-Programmable Gate Array (FPGA) is used to resolve system bottlenecks and improve system performance. The identified hotspot function is then converted to a hardware accelerator and mapped onto the hardware platform. Two types of hardware acceleration methods – central bus design and co-processor design, are implemented for comparison in the proposed architecture. (3) System specifications, such as performance, energy consumption, and resource costs, are measured and analyzed. The trade-off of these three factors is compared and balanced. Different hardware accelerators are implemented and evaluated based on system requirements. 4) The system verification platform is designed based on Integrated Circuit (IC) workflow. Hardware optimization techniques are used for higher performance and less resource costs. Experimental results show that the proposed hardware acceleration workflow for software applications is an efficient technique. The system can reach 2.8X performance improvements and save 31.84% energy consumption by applying the Bus-IP design. The Co-processor design can have 7.9X performance and save 75.85% energy consumption.

System-on-a-Chip (SoC) based Hardware Acceleration in Register Transfer Level (RTL) Design

Today, modern System-on-a-Chip (SoC) systems have grown rapidly due to the increased processing power, while maintaining the size of the hardware circuit. The number of transistors on a chip continues to increase, but current SoC designs may not be able to exploit the potential performance, especially with energy consumption and chip area becoming two major concerns. Traditional SoC designs usually separate software and hardware. Thus, the process of improving the system performance is a complicated task for both software and hardware designers. The aim of this research is to develop hardware acceleration workflow for software applications. Thus, system performance can be improved with constraints of energy consumption and on-chip resource costs. The characteristics of software applications can be identified by using profiling tools. Hardware acceleration can have significant performance improvement for highly mathematical calculations or repeated functions. The performance of SoC systems can then be improved, if the hardware acceleration method is used to accelerate the element that incurs performance overheads. The concepts mentioned in this study can be easily applied to a variety of sophisticated software applications. The contributions of SoC-based hardware acceleration in the hardware-software co-design platform include the following: (1) Software profiling methods are applied to H.264 Coder-Decoder (CODEC) core. The hotspot function of aimed application is identified by using critical attributes such as cycles per loop, loop rounds, etc. (2) Hardware acceleration method based on Field-Programmable Gate Array (FPGA) is used to resolve system bottlenecks and improve system performance. The identified hotspot function is then converted to a hardware accelerator and mapped onto the hardware platform. Two types of hardware acceleration methods – central bus design and co-processor design, are implemented for comparison in the proposed architecture. (3) System specifications, such as performance, energy consumption, and resource costs, are measured and analyzed. The trade-off of these three factors is compared and balanced. Different hardware accelerators are implemented and evaluated based on system requirements. 4) The system verification platform is designed based on Integrated Circuit (IC) workflow. Hardware optimization techniques are used for higher performance and less resource costs. Experimental results show that the proposed hardware acceleration workflow for software applications is an efficient technique. The system can reach 2.8X performance improvements and save 31.84% energy consumption by applying the Bus-IP design. The Co-processor design can have 7.9X performance and save 75.85% energy consumption.

Longitudinal effects of family factors on alcohol use and alcohol-related problems among males from pre-adolescence to adulthood

The goal of this study was to examine the longitudinal effects of five family factors on alcohol use among adolescent males. The family factors included familism (family pride, loyalty, and cohesion), parent derogation (being put down by parents), parent/child communication, family alcohol problems and family drug problems. The study focused on the effects of the family factors reported by a sample of 451 White-non-Hispanic and African American males during early and mid-adolescence on (1) the intensity of alcohol use in mid-adolescence, and (2) the number of problems associated with alcohol use during the transition to young adulthood. The study also explored racial differences in the effects of the family factors. The data for this study were derived from a two-phase longitudinal epidemiologic cohort study of male and female adolescents enrolled in middle schools in Miami, FL. Data were collected at four points between 1990 and 2001. Linear and logistical regressions were used to analyze the effects of the family variables on the dependent variables. ^ The results of the analyses indicated that all of the family variables except family drug problems were statistically significant predictors of the level of alcohol use and alcohol-related problems. Familism had a moderate influence on both of the dependent variables at all data points, while parent derogation, parent/child communication and family alcohol problems were weak predictors. While the family factors varied by race, their impact on the dependent variables did not vary substantially. ^ This study had methodological shortcomings related to measurement and design that may have contributed to the weak influence of the variables. Future studies should explore possible mediating effects of these variables, and should employ more sensitive measures that are culturally appropriate. The results suggest that, since early family factors have long-term effects on children's substance-using behaviors, the family environment should be addressed in prevention and intervention efforts. ^

A thermally wavelength-tunable photonic switch based on silicon microring resonator

Silicon photonics is a very promising technology for future low-cost high-bandwidth optical telecommunication applications down to the chip level. This is due to the high degree of integration, high optical bandwidth and large speed coupled with the development of a wide range of integrated optical functions. Silicon-based microring resonators are a key building block that can be used to realize many optical functions such as switching, multiplexing, demultiplaxing and detection of optical wave. The ability to tune the resonances of the microring resonators is highly desirable in many of their applications. In this work, the study and application of a thermally wavelength-tunable photonic switch based on silicon microring resonator is presented. Devices with 10μm diameter were systematically studied and used in the design. Its resonance wavelength was tuned by thermally induced refractive index change using a designed local micro-heater. While thermo-optic tuning has moderate speed compared with electro-optic and all-optic tuning, with silicon’s high thermo-optic coefficient, a much wider wavelength tunable range can be realized. The device design was verified and optimized by optical and thermal simulations. The fabrication and characterization of the device was also implemented. The microring resonator has a measured FSR of ∼18 nm, FWHM in the range 0.1-0.2 nm and Q around 10,000. A wide tunable range (>6.4 nm) was achieved with the switch, which enables dense wavelength division multiplexing (DWDM) with a channel space of 0.2nm. The time response of the switch was tested on the order of 10 μs with a low power consumption of ∼11.9mW/nm. The measured results are in agreement with the simulations. Important applications using the tunable photonic switch were demonstrated in this work. 1×4 and 4×4 reconfigurable photonic switch were implemented by using multiple switches with a common bus waveguide. The results suggest the feasibility of on-chip DWDM for the development of large-scale integrated photonics. Using the tunable switch for output wavelength control, a fiber laser was demonstrated with Erbium-doped fiber amplifier as the gain media. For the first time, this approach integrated on-chip silicon photonic wavelength control.

The effect of reciprocal mapping on high-risk sixth-grade students' social studies achievement

Reading deficits in students in Grades 4 to 12 are evident in American schools. Informational text is particularly difficult for students. This quasi-experimental study (N=138) investigated sixth-grade students' achievement in social studies using the Reciprocal Mapping instructional routine, compared to sixth-grade students' achievement taught with a traditional approach. The Reciprocal Mapping instructional routine incorporated explicit instruction in text structure using graphic organizers. Students created their own graphic organizers and used them to write about social studies content. The comparison group used a traditional approach, students' reading the textbook and answering questions. Students for this study included sixth-graders in the seven sixth-grade classrooms in two public schools in a small, rural south Florida school district. A focus of this study was to determine the helpfulness of the intervention for at-risk readers. To determine students considered to be at-risk, the researcher used data from the reading portion of the Florida Comprehensive Assessment Test (FCAT), 2011-2012, that considers Level 1 and 2 as at-risk readers. The quasi-experimental study used a pretest-posttest control group design, with students assigned to treatment groups by class. Two teachers at the two rural sites were trained on the Reciprocal Mapping instructional routine and taught students in both the experimental and control groups for an equivalent amount of time over a 5-week period. Results of the 3 x 2 factorial ANCOVA found a significant positive difference favoring the experimental group's social studies achievement as compared to that of the comparison group as measured by the pre/post unit test from the social studies series (McGraw-Hill, 2013), when controlling for initial differences in students' reading FCAT scores. Interactions for high-risk struggling readers were investigated using the significance level p < .05. Due to no significant interaction the main effects of treatment were interpreted. The pretest was used as a covariate and the multivariate analysis was found to be significant. Therefore, analysis of covariance was run on each of the dependent variable as a follow-up. Reciprocal Mapping was found to be significant in posttest scores, independent of gender and level of risk, and while holding the pretest scores constant. Findings showed there was a significant difference in the performance of the high-risk reading students taught with the Reciprocal Mapping intervention who scored statistically better than students in the control group. Further study findings showed that teacher fidelity of implementation of the treatment had a statistically significant relationship in predicting posttest scores when controlling for pretest scores. Study results indicated that improving students' use of text structure through the Reciprocal Mapping instructional routine positively supported sixth-grade students' social studies achievement.

A Thermally Wavelength-tunable Photonic Switch Based on Silicon Microring Resonator

Silicon photonics is a very promising technology for future low-cost high-bandwidth optical telecommunication applications down to the chip level. This is due to the high degree of integration, high optical bandwidth and large speed coupled with the development of a wide range of integrated optical functions. Silicon-based microring resonators are a key building block that can be used to realize many optical functions such as switching, multiplexing, demultiplaxing and detection of optical wave. The ability to tune the resonances of the microring resonators is highly desirable in many of their applications. In this work, the study and application of a thermally wavelength-tunable photonic switch based on silicon microring resonator is presented. Devices with 10µm diameter were systematically studied and used in the design. Its resonance wavelength was tuned by thermally induced refractive index change using a designed local micro-heater. While thermo-optic tuning has moderate speed compared with electro-optic and all-optic tuning, with silicon’s high thermo-optic coefficient, a much wider wavelength tunable range can be realized. The device design was verified and optimized by optical and thermal simulations. The fabrication and characterization of the device was also implemented. The microring resonator has a measured FSR of ~18 nm, FWHM in the range 0.1-0.2 nm and Q around 10,000. A wide tunable range (>6.4 nm) was achieved with the switch, which enables dense wavelength division multiplexing (DWDM) with a channel space of 0.2nm. The time response of the switch was tested on the order of 10 us with a low power consumption of ~11.9mW/nm. The measured results are in agreement with the simulations. Important applications using the tunable photonic switch were demonstrated in this work. 1×4 and 4×4 reconfigurable photonic switch were implemented by using multiple switches with a common bus waveguide. The results suggest the feasibility of on-chip DWDM for the development of large-scale integrated photonics. Using the tunable switch for output wavelength control, a fiber laser was demonstrated with Erbium-doped fiber amplifier as the gain media. For the first time, this approach integrated on-chip silicon photonic wavelength control.

Efficient asynchronous scheduling algorithms for cost-effective buffered crossbar switches

Buffered crossbar switches have recently attracted considerable attention as the next generation of high speed interconnects. They are a special type of crossbar switches with an exclusive buffer at each crosspoint of the crossbar. They demonstrate unique advantages over traditional unbuffered crossbar switches, such as high throughput, low latency, and asynchronous packet scheduling. However, since crosspoint buffers are expensive on-chip memories, it is desired that each crosspoint has only a small buffer. This dissertation proposes a series of practical algorithms and techniques for efficient packet scheduling for buffered crossbar switches. To reduce the hardware cost of such switches and make them scalable, we considered partially buffered crossbars, whose crosspoint buffers can be of an arbitrarily small size. Firstly, we introduced a hybrid scheme called Packet-mode Asynchronous Scheduling Algorithm (PASA) to schedule best effort traffic. PASA combines the features of both distributed and centralized scheduling algorithms and can directly handle variable length packets without Segmentation And Reassembly (SAR). We showed by theoretical analysis that it achieves 100% throughput for any admissible traffic in a crossbar with a speedup of two. Moreover, outputs in PASA have a large probability to avoid the more time-consuming centralized scheduling process, and thus make fast scheduling decisions. Secondly, we proposed the Fair Asynchronous Segment Scheduling (FASS) algorithm to handle guaranteed performance traffic with explicit flow rates. FASS reduces the crosspoint buffer size by dividing packets into shorter segments before transmission. It also provides tight constant performance guarantees by emulating the ideal Generalized Processor Sharing (GPS) model. Furthermore, FASS requires no speedup for the crossbar, lowering the hardware cost and improving the switch capacity. Thirdly, we presented a bandwidth allocation scheme called Queue Length Proportional (QLP) to apply FASS to best effort traffic. QLP dynamically obtains a feasible bandwidth allocation matrix based on the queue length information, and thus assists the crossbar switch to be more work-conserving. The feasibility and stability of QLP were proved, no matter whether the traffic distribution is uniform or non-uniform. Hence, based on bandwidth allocation of QLP, FASS can also achieve 100% throughput for best effort traffic in a crossbar without speedup.

Hybrid power system intelligent operation and protection involving distributed architectures and pulsed loads

Efficient and reliable techniques for power delivery and utilization are needed to account for the increased penetration of renewable energy sources in electric power systems. Such methods are also required for current and future demands of plug-in electric vehicles and high-power electronic loads. Distributed control and optimal power network architectures will lead to viable solutions to the energy management issue with high level of reliability and security. This dissertation is aimed at developing and verifying new techniques for distributed control by deploying DC microgrids, involving distributed renewable generation and energy storage, through the operating AC power system. To achieve the findings of this dissertation, an energy system architecture was developed involving AC and DC networks, both with distributed generations and demands. The various components of the DC microgrid were designed and built including DC-DC converters, voltage source inverters (VSI) and AC-DC rectifiers featuring novel designs developed by the candidate. New control techniques were developed and implemented to maximize the operating range of the power conditioning units used for integrating renewable energy into the DC bus. The control and operation of the DC microgrids in the hybrid AC/DC system involve intelligent energy management. Real-time energy management algorithms were developed and experimentally verified. These algorithms are based on intelligent decision-making elements along with an optimization process. This was aimed at enhancing the overall performance of the power system and mitigating the effect of heavy non-linear loads with variable intensity and duration. The developed algorithms were also used for managing the charging/discharging process of plug-in electric vehicle emulators. The protection of the proposed hybrid AC/DC power system was studied. Fault analysis and protection scheme and coordination, in addition to ideas on how to retrofit currently available protection concepts and devices for AC systems in a DC network, were presented. A study was also conducted on the effect of changing the distribution architecture and distributing the storage assets on the various zones of the network on the system's dynamic security and stability. A practical shipboard power system was studied as an example of a hybrid AC/DC power system involving pulsed loads. Generally, the proposed hybrid AC/DC power system, besides most of the ideas, controls and algorithms presented in this dissertation, were experimentally verified at the Smart Grid Testbed, Energy Systems Research Laboratory. All the developments in this dissertation were experimentally verified at the Smart Grid Testbed.

Social capital, HIV risk behavior and substance use among recent Latino immigrants in South Florida

Social capital, or social cohesion or group connectedness, can influence both HIV risk behavior and substance use. Because recent immigrants undergo a change in environment, one of the consequences can be a change in social capital. There may be an association among changes in social capital, and HIV risk behavior and substance use post immigration. The dissertation focused on the interface of these three variables among recent Latino immigrants (RLIs) in South Florida. The first manuscript is a systematic review of social capital and HIV risk behavior, and served as a partial background for the second and third manuscripts. Twelve papers with a measure of social capital as an independent variable and HIV risk as the dependent variable were included in the analysis. Eleven studies measured social capital at the individual level, and one study measured social capital at the group level. HIV risk was influenced by social capital, but the type of influence was dependent on the type of social capital and on the study population. Cognitive social capital, or levels of collective action, was protective against HIV in both men and women. The role of structural social capital, or levels of civic engagement/group participation, on HIV risk was dependent on the type of structural social capital and varied by gender. Microfinance programs and functional group participation were protective for women, while dysfunctional group participation and peer-level support may have increased HIV risk among men. The second manuscript was an original study assessing changes in social capital and HIV risk behavior pre to post immigration among RLIs in South Florida (n=527). HIV risk behavior was assessed through the frequency of vaginal-penile condom use, and the number of sexual partners. It was a longitudinal study using secondary data analysis to assess changes in social capital and HIV risk behavior pre immigration to two years post immigration, and to determine if there was a relationship between the two variables. There was an 8% decrease in total social capital (p < .05). Reporting of 'Never use' of condoms in the past 90 days increased in all subcategories (p < .05). Single men had a decrease in number of sexual partners (p < .05). Lower social capital measured on the dimension of 'friend and other' was marginally associated with fewer sexual partners. The third manuscript was another original study looking at the association between social capital and substance use among RLIs in South Florida (n=527). Substance use with measured by frequency of hazardous alcoholic drinking, and illicit drug use. It was a longitudinal study of social capital and substance-use from pre to two years post immigration. Post-immigration, social capital, hazardous drinking and illicit drug use decreased (p<.001). After adjusting for time, compared to males, females were less likely to engage in hazardous drinking (OR=.31, p<.001), and less likely to engage in illicit drug use (OR=.67, p=.01). Documentation status was a moderator between social capital and illicit drug use. 'Business' and 'Agency' social capital were associated with changes in illicit drug use for documented immigrants. After adjusting for gender and marital status, on average, documented immigrants with a one-unit increase in 'business' social capital were 1.2 times more likely to engage in illicit drug use (p<.01), and documented immigrants with one-unit increase in 'agency' social capital were 38% less likely to engage in illicit drug use (p<.01). 'Friend and other' social capital was associated with a decrease in illicit drug use among undocumented immigrants. After adjusting for gender and marital status, on average, undocumented immigrants with a one-unit increase in 'friend and other' social capital were 45% less likely to engage in hazardous drinking and 44% less likely to use illicit drugs (p<.01, p<.05). Studying these three domains is relevant because HIV continues to be a public health issue, particularly in Miami-Dade County, which is ranked among other U.S. regions with high rates of HIV/AIDS prevalence. Substance use is associated with HIV risk behavior; in most studies, increased substance use is associated with increased chances of HIV risk behavior. Immigration, which is the hypothesized catalyst for the change in social capital, has an impact on the dynamic of a society. Greater immigration can be burdensome on the host country's societal resources; however immigrants are also potentially a source of additional skilled labor for the workforce. Therefore, successful adaption of immigrants can have a positive influence on receiving communities. With Florida being a major receiver of immigrants to the U.S, this dissertation attempts to address an important public health issue for South Florida and the U.S. at large.

Hybrid Power System Intelligent Operation and Protection Involving Distributed Architectures and Pulsed Loads

Efficient and reliable techniques for power delivery and utilization are needed to account for the increased penetration of renewable energy sources in electric power systems. Such methods are also required for current and future demands of plug-in electric vehicles and high-power electronic loads. Distributed control and optimal power network architectures will lead to viable solutions to the energy management issue with high level of reliability and security. This dissertation is aimed at developing and verifying new techniques for distributed control by deploying DC microgrids, involving distributed renewable generation and energy storage, through the operating AC power system. To achieve the findings of this dissertation, an energy system architecture was developed involving AC and DC networks, both with distributed generations and demands. The various components of the DC microgrid were designed and built including DC-DC converters, voltage source inverters (VSI) and AC-DC rectifiers featuring novel designs developed by the candidate. New control techniques were developed and implemented to maximize the operating range of the power conditioning units used for integrating renewable energy into the DC bus. The control and operation of the DC microgrids in the hybrid AC/DC system involve intelligent energy management. Real-time energy management algorithms were developed and experimentally verified. These algorithms are based on intelligent decision-making elements along with an optimization process. This was aimed at enhancing the overall performance of the power system and mitigating the effect of heavy non-linear loads with variable intensity and duration. The developed algorithms were also used for managing the charging/discharging process of plug-in electric vehicle emulators. The protection of the proposed hybrid AC/DC power system was studied. Fault analysis and protection scheme and coordination, in addition to ideas on how to retrofit currently available protection concepts and devices for AC systems in a DC network, were presented. A study was also conducted on the effect of changing the distribution architecture and distributing the storage assets on the various zones of the network on the system’s dynamic security and stability. A practical shipboard power system was studied as an example of a hybrid AC/DC power system involving pulsed loads. Generally, the proposed hybrid AC/DC power system, besides most of the ideas, controls and algorithms presented in this dissertation, were experimentally verified at the Smart Grid Testbed, Energy Systems Research Laboratory. All the developments in this dissertation were experimentally verified at the Smart Grid Testbed.

Social Capital, HIV Risk Behavior and Substance Use among Recent Latino Immigrants in South Florida

Social capital, or social cohesion or group connectedness, can influence both HIV risk behavior and substance use. Because recent immigrants undergo a change in environment, one of the consequences can be a change in social capital. There may be an association among changes in social capital, and HIV risk behavior and substance use post immigration. The dissertation focused on the interface of these three variables among recent Latino immigrants (RLIs) in South Florida. The first manuscript is a systematic review of social capital and HIV risk behavior, and served as a partial background for the second and third manuscripts. Twelve papers with a measure of social capital as an independent variable and HIV risk as the dependent variable were included in the analysis. Eleven studies measured social capital at the individual level, and one study measured social capital at the group level. HIV risk was influenced by social capital, but the type of influence was dependent on the type of social capital and on the study population. Cognitive social capital, or levels of collective action, was protective against HIV in both men and women. The role of structural social capital, or levels of civic engagement/group participation, on HIV risk was dependent on the type of structural social capital and varied by gender. Microfinance programs and functional group participation were protective for women, while dysfunctional group participation and peer-level support may have increased HIV risk among men. The second manuscript was an original study assessing changes in social capital and HIV risk behavior pre to post immigration among RLIs in South Florida (n=527). HIV risk behavior was assessed through the frequency of vaginal-penile condom use, and the number of sexual partners. It was a longitudinal study using secondary data analysis to assess changes in social capital and HIV risk behavior pre immigration to two years post immigration, and to determine if there was a relationship between the two variables. There was an 8% decrease in total social capital (p ˂ .05). Reporting of ‘Never use’ of condoms in the past 90 days increased in all subcategories (p ˂ .05). Single men had a decrease in number of sexual partners (p ˂ .05). Lower social capital measured on the dimension of ‘friend and other’ was marginally associated with fewer sexual partners. The third manuscript was another original study looking at the association between social capital and substance use among RLIs in South Florida (n=527). Substance use with measured by frequency of hazardous alcoholic drinking, and illicit drug use. It was a longitudinal study of social capital and substance-use from pre to two years post immigration. Post-immigration, social capital, hazardous drinking and illicit drug use decreased (p˂.001). After adjusting for time, compared to males, females were less likely to engage in hazardous drinking (OR=.31, p˂.001), and less likely to engage in illicit drug use (OR=.67, p=.01). Documentation status was a moderator between social capital and illicit drug use. ‘Business’ and ‘Agency’ social capital were associated with changes in illicit drug use for documented immigrants. After adjusting for gender and marital status, on average, documented immigrants with a one-unit increase in ‘business’ social capital were 1.2 times more likely to engage in illicit drug use (p˂.01), and documented immigrants with one-unit increase in ‘agency’ social capital were 38% less likely to engage in illicit drug use (p˂.01). ‘Friend and other’ social capital was associated with a decrease in illicit drug use among undocumented immigrants. After adjusting for gender and marital status, on average, undocumented immigrants with a one-unit increase in ‘friend and other’ social capital were 45% less likely to engage in hazardous drinking and 44% less likely to use illicit drugs (p˂.01, p˂.05). Studying these three domains is relevant because HIV continues to be a public health issue, particularly in Miami-Dade County, which is ranked among other U.S. regions with high rates of HIV/AIDS prevalence. Substance use is associated with HIV risk behavior; in most studies, increased substance use is associated with increased chances of HIV risk behavior. Immigration, which is the hypothesized catalyst for the change in social capital, has an impact on the dynamic of a society. Greater immigration can be burdensome on the host country’s societal resources; however immigrants are also potentially a source of additional skilled labor for the workforce. Therefore, successful adaption of immigrants can have a positive influence on receiving communities. With Florida being a major receiver of immigrants to the U.S, this dissertation attempts to address an important public health issue for South Florida and the U.S. at large.

Digital surveillance based on video CODEC System-on-a-Chip (SoC) platforms

Today, most conventional surveillance networks are based on analog system, which has a lot of constraints like manpower and high-bandwidth requirements. It becomes the barrier for today's surveillance network development. This dissertation describes a digital surveillance network architecture based on the H.264 coding/decoding (CODEC) System-on-a-Chip (SoC) platform. The proposed digital surveillance network architecture includes three major layers: software layer, hardware layer, and the network layer. The following outlines the contributions to the proposed digital surveillance network architecture. (1) We implement an object recognition system and an object categorization system on the software layer by applying several Digital Image Processing (DIP) algorithms. (2) For better compression ratio and higher video quality transfer, we implement two new modules on the hardware layer of the H.264 CODEC core, i.e., the background elimination module and the Directional Discrete Cosine Transform (DDCT) module. (3) Furthermore, we introduce a Digital Signal Processor (DSP) sub-system on the main bus of H.264 SoC platforms as the major hardware support system for our software architecture. Thus we combine the software and hardware platforms to be an intelligent surveillance node. Lab results show that the proposed surveillance node can dramatically save the network resources like bandwidth and storage capacity.

Pseudomonas aeruginosa AMPR transcriptional regulatory network

In Enterobacteriaceae, the transcriptional regulator AmpR, a member of the LysR family, regulates the expression of a chromosomal β-lactamase AmpC. The regulatory repertoire of AmpR is broader in Pseudomonas aeruginosa, an opportunistic pathogen responsible for numerous acute and chronic infections including cystic fibrosis. Previous studies showed that in addition to regulating ampC, P. aeruginosa AmpR regulates the sigma factor AlgT/U and production of some quorum sensing (QS)-regulated virulence factors. In order to better understand the ampR regulon, the transcriptional profiles generated using DNA microarrays and RNA-Seq of the prototypic P. aeruginosa PAO1 strain with its isogenic ampR deletion mutant, PAOΔampR were analyzed. Transcriptome analysis demonstrates that the AmpR regulon is much more extensive than previously thought influencing the differential expression of over 500 genes. In addition to regulating resistance to β-lactam antibiotics via AmpC, AmpR also regulates non-β-lactam antibiotic resistance by modulating the MexEF-OprN efflux pump. Virulence mechanisms including biofilm formation, QS-regulated acute virulence, and diverse physiological processes such as oxidative stress response, heat-shock response and iron uptake are AmpR-regulated. Real-time PCR and phenotypic assays confirmed the transcriptome data. Further, Caenorhabditis elegans model demonstrates that a functional AmpR is required for full pathogenicity of P. aeruginosa. AmpR, a member of the core genome, also regulates genes in the regions of genome plasticity that are acquired by horizontal gene transfer. The extensive AmpR regulon included other transcriptional regulators and sigma factors, accounting for the extensive AmpR regulon. Gene expression studies demonstrate AmpR-dependent expression of the QS master regulator LasR that controls expression of many virulence factors. Using a chromosomally tagged AmpR, ChIP-Seq studies show direct AmpR binding to the lasR promoter. The data demonstrates that AmpR functions as a global regulator in P. aeruginosa and is a positive regulator of acute virulence while negatively regulating chronic infection phenotypes. In summary, my dissertation sheds light on the complex regulatory circuit in P. aeruginosa to provide a better understanding of the bacterial response to antibiotics and how the organism coordinately regulates a myriad of virulence factors.