Civil service reform trends in public personnel management: Experiences from the Commonwealth of the Bahamas

This study has explored the potential for implementing a merit-based public personnel system in The Bahamas, a former British colony in The Commonwealth Caribbean. Specifically, the study evaluated the use of merit-based public personnel management practices in areas of recruitment, selection, promotion, training and employee development and performance evaluation. Driving forces and barriers which impact merit system successes and failures as well as strategies for institutionalizing merit system practices are identified. Finally the study attempted to apply the developmental model created by Klingner (1996) to describe the stage of public personnel management in The Bahamas. The data for the study was collected through in-depth interviews with expert observers. ^

Development of ``HealthServe'': A measure of customer service orientation in healthcare

An assessment tool designed to measure a customer service orientation among RN's and LPN's was developed using a content-oriented approach. Critical incidents were first developed by asking two samples of healthcare managers (n = 52 and 25) to identify various customer-contact situations. The critical incidents were then used to formulate a 121-item instrument. Patient-contact workers from 3 hospitals (n = 102) completed the instrument along with the NEO-FFI, a measure of the Big Five personality factors. Concurrently, managers completed a performance evaluation scale on the employees participating in the study in order to determine the predictive validity of the instrument.^ Through a criterion-keying approach, the instrument was scaled down to 38 items. The correlation between HealthServe and the supervisory ratings of performance evaluation data supported the instrument's criterion-related validity (r =.66, p $<$.0001). Incremental validity of HealthServe over the Big Five was found with HealthServe accounting for 46% of the variance.^ The NEO-FFI was used to assess the correlation between personality traits and HealthServe. A factor analysis of HealthServe suggested 4 factors which were correlated with the NEO-FFI scores. Results indicated that HealthServe was related to Extraversion, Openness to Experience, Agreeableness, Conscientiousness and negatively related to Neuroticism.^ The benefits of the test construction procedure used here over the use of broad-based measures of personality were discussed as well as the limitations of using a concurrent validation strategy. Recommendations for future studies were provided. ^

Development of prediction models for freeway incident durations using data mining techniques

The nation's freeway systems are becoming increasingly congested. A major contribution to traffic congestion on freeways is due to traffic incidents. Traffic incidents are non-recurring events such as accidents or stranded vehicles that cause a temporary roadway capacity reduction, and they can account for as much as 60 percent of all traffic congestion on freeways. One major freeway incident management strategy involves diverting traffic to avoid incident locations by relaying timely information through Intelligent Transportation Systems (ITS) devices such as dynamic message signs or real-time traveler information systems. The decision to divert traffic depends foremost on the expected duration of an incident, which is difficult to predict. In addition, the duration of an incident is affected by many contributing factors. Determining and understanding these factors can help the process of identifying and developing better strategies to reduce incident durations and alleviate traffic congestion. A number of research studies have attempted to develop models to predict incident durations, yet with limited success. ^ This dissertation research attempts to improve on this previous effort by applying data mining techniques to a comprehensive incident database maintained by the District 4 ITS Office of the Florida Department of Transportation (FDOT). Two categories of incident duration prediction models were developed: "offline" models designed for use in the performance evaluation of incident management programs, and "online" models for real-time prediction of incident duration to aid in the decision making of traffic diversion in the event of an ongoing incident. Multiple data mining analysis techniques were applied and evaluated in the research. The multiple linear regression analysis and decision tree based method were applied to develop the offline models, and the rule-based method and a tree algorithm called M5P were used to develop the online models. ^ The results show that the models in general can achieve high prediction accuracy within acceptable time intervals of the actual durations. The research also identifies some new contributing factors that have not been examined in past studies. As part of the research effort, software code was developed to implement the models in the existing software system of District 4 FDOT for actual applications. ^

Managing Quality in the Hospitality Industry:

In - Managing Quality In the Hospitality Industry – an observation by W. Gerald Glover, Associate Professor, Hospitality Management Program, Appalachian State University, initially Glover establishes: “Quality is a primary concern in the hospitality industry. The author sees problems in the nature of the way businesses are managed and discusses approaches to ensuring quality in corporate cultures.” As the title suggests, the author wants to point out certain discrepancies in hospitality quality control, as well as enlighten you as to how to address some of these concerns. “A discussion of quality presents some interesting dilemmas. Quality is something that almost everyone wants,” Assistant Professor Glover notes. “Service businesses will never admit that they don't provide it to their customers, and few people actually understand what it takes to make it happen,” he further maintains. Glover wants you to know that in a dynamic industry such as hospitality, quality is the common denominator. Whether it be hotel, restaurant, airline, et al., quality is the raison d’être of the industry. “Quality involves the consistent delivery of a product or service according to the expected standards,” Glover provides. Many, if not all quality deficiencies can be traced back to management, Glover declares. He bullet points some of the operational and guest service problems managers’ face on a daily basis. One important point of note is the measuring and managing of quality. “Standards management is another critical area in people and product management that is seldom effective in corporations,” says Glover. “Typically, this area involves performance documentation, performance evaluation and appraisal, coaching, discipline, and team-building.” “To be effective at managing standards, an organization must establish communication in realms where it is currently non-existent or ineffective,” Glover goes on to say. “Coaching, training, and performance appraisal are methods to manage individuals who are expected to do what's expected.” He alludes to the benefit quality circles supply as well. In addressing American organizational behavior, Glover postures, “…a realization must develop that people and product management are the primary influences on generating revenues and eventually influencing the bottom line in all American organizations.” Glover introduces the concept of pro-activity. “Most recently, quality assurance and quality management have become the means used to develop and maintain proactive corporate cultures. When prevention is the focus, quality is most consistent and expectations are usually met,” he offers. Much of the article is dedicated to, “Appendix A-Table 1-Characteristics of Corporate Cultures (Reactive and Proactive. In it, Glover measures the impact of proactive management as opposed to the reactive management intrinsic to many elements of corporate culture mentality.

WiFi and LTE Coexistence in the Unlicensed Spectrum

Today, smart-phones have revolutionized wireless communication industry towards an era of mobile data. To cater for the ever increasing data traffic demand, it is of utmost importance to have more spectrum resources whereby sharing under-utilized spectrum bands is an effective solution. In particular, the 4G broadband Long Term Evolution (LTE) technology and its foreseen 5G successor will benefit immensely if their operation can be extended to the under-utilized unlicensed spectrum. In this thesis, first we analyze WiFi 802.11n and LTE coexistence performance in the unlicensed spectrum considering multi-layer cell layouts through system level simulations. We consider a time division duplexing (TDD)-LTE system with an FTP traffic model for performance evaluation. Simulation results show that WiFi performance is more vulnerable to LTE interference, while LTE performance is degraded only slightly. Based on the initial findings, we propose a Q-Learning based dynamic duty cycle selection technique for configuring LTE transmission gaps, so that a satisfactory throughput is maintained both for LTE and WiFi systems. Simulation results show that the proposed approach can enhance the overall capacity performance by 19% and WiFi capacity performance by 77%, hence enabling effective coexistence of LTE and WiFi systems in the unlicensed band.

Preparation of an Immunosorbent and its use in the Solid Phase Extraction of Benzodiazepines

The use of capillary electrophoresis (CE) has been restricted to applications having high sample concentrations because of its low sensitivity caused by small injection volumes and, when ultraviolet (UV) detection is used, the short optical path length. Sensitivity in CE can be improved by using more sensitive detection systems, or by preconcentration techniques which are based on chromatographic and/or electrophoretic principles. One of the promising strategies to improve sensitivity is solid phase extraction (SPE). Solid Phase Extraction utilizes high sample volumes and a variety of complex matrixes to facilitate trace detection. To increase the specificity of the SPE a selective solid phase must be chosen. Immunosorbents, which are a combination of an antibody and a solid support, have proven to be an excellent option because of high selectivity of the antibody. This thesis is an exploratory study of the application of immunosorbent-SPE combined with CE for trace concentration of benzodiazepines. This research describes the immobilization and performance evaluation of an immunosorbent prepared by immobilizing a benzodiazepine-specific antibody on aminopropyl silica. The binding capacity of the immunosorbent, measured as µg of benzodiazepine/ gram of immunosorbent, was 39 ± 10. The long term stability of the prepared immunosorbent has been improved by capping the remaining aminopropyl groups by reaction with acetic anhydride. The capped immunosorbent retained its binding capacity after several uses.

Team Primacy Concept-based employee evaluation and job performance

This qualitative case study explored how employees learn from Team Primacy Concept (TPC)-based employee evaluation and how they apply the knowledge in their job performance. Kolb's experiential learning model (1974) served as a conceptual framework for the study to reveal the process of how employees learn from TPC evaluation, namely, how they experience, reflect, conceptualize and act on performance feedback. TPC based evaluation is a form of multirater evaluation that consists of three components: self-feedback, supervisor's feedback, and peer feedback. The distinctive characteristic of TPC based evaluation is the team evaluation component during which the employee's professional performance is discussed by one's peers in a face-to-face team setting, while other forms of multirater evaluation are usually conducted in a confidential and anonymous manner.^ Case study formed the methodological framework. The case was the Southeastern Virginia (SEVA) region of the Institute for Family Centered Services, and the participants were eight employees of the SEVA region. Findings showed that the evaluation process was anxiety producing for employees, especially the process of peer evaluation in a team setting. Preparation was found to be an important phase of TPC evaluation. Overall, the positive feedback delivered in a team setting made team members feel acknowledged. The study participants felt that honesty in providing feedback and openness to hearing challenges were significant prerequisites to the TPC evaluation process. Further, in the planning phase, employees strove to develop goals for themselves that were meaningful. Also, the catalyst for feedback implementation appeared to stem from one's accountability to self and to the client or community. Generally, the participants identified a number of performance improvement goals that they attained during their employment with IFCS, which were supported by their developmental plans.^ In conclusion, the study identified the process by which employees learned from TPC-based employee evaluation and the ways in which they used the knowledge to improve their job performance. Specifically, the study examined how participants felt and what they thought about TPC-based feedback, in what ways they reflected and made meaning of the feedback, and how they used the feedback to improve their job performance.^

Aerodynamic load characteristics evaluation and tri-axial performance testing on fiber reinforced polymer connections and metal fasteners to promote hurricane damage mitigation

Damages during extreme wind events highlight the weaknesses of mechanical fasteners at the roof-to-wall connections in residential timber frame buildings. The allowable capacity of the metal fasteners is based on results of unidirectional component testing that do not simulate realistic tri-axial aerodynamic loading effects. The first objective of this research was to simulate hurricane effects and study hurricane-structure interaction at full-scale, facilitating better understanding of the combined impacts of wind, rain, and debris on inter-component connections at spatial and temporal scales. The second objective was to evaluate the performance of a non-intrusive roof-to-wall connection system using fiber reinforced polymer (FRP) materials and compare its load capacity to the capacity of an existing metal fastener under simulated aerodynamic loads. ^ The Wall of Wind (WoW) testing performed using FRP connections on a one-story gable-roof timber structure instrumented with a variety of sensors, was used to create a database on aerodynamic and aero-hydrodynamic loading on roof-to-wall connections tested under several parameters: angles of attack, wind-turbulence content, internal pressure conditions, with and without effects of rain. Based on the aerodynamic loading results obtained from WoW tests, sets of three force components (tri-axial mean loads) were combined into a series of resultant mean forces, which were used to test the FRP and metal connections in the structures laboratory up to failure. A new component testing system and test protocol were developed for testing fasteners under simulated triaxial loading as opposed to uni-axial loading. The tri-axial and uni-axial test results were compared for hurricane clips. Also, comparison was made between tri-axial load capacity of FRP and metal connections. ^ The research findings demonstrate that the FRP connection is a viable option for use in timber roof-to-wall connection system. Findings also confirm that current testing methods of mechanical fasteners tend to overestimate the actual load capacities of a connector. Additionally, the research also contributes to the development a new testing protocol for fasteners using tri-axial simultaneous loads based on the aerodynamic database obtained from the WoW testing. ^

Evaluation of the internal structural validity of the Diagnostic and Statistical Manual of Mental Disorders (Fourth Edition) anxiety disorders in children and adolescents

The purpose of the present dissertation was to evaluate the internal validity of symptoms of four common anxiety disorders included in the Diagnostic and Statistical Manual of Mental Disorders fourth edition (text revision) (DSM-IV-TR; American Psychiatric Association, 2000), namely, separation anxiety disorder (SAD), social phobia (SOP), specific phobia (SP), and generalized anxiety disorder (GAD), in a sample of 625 youth (ages 6 to 17 years) referred to an anxiety disorders clinic and 479 parents. Confirmatory factor analyses (CFAs) were conducted on the dichotomous items of the SAD, SOP, SP, and GAD sections of the youth and parent versions of the Anxiety Disorders Interview Schedule for DSM-IV (ADIS-IV: C/P; Silverman & Albano, 1996) to test and compare a number of factor models including a factor model based on the DSM. Contrary to predictions, findings from CFAs showed that a correlated model with five factors of SAD, SOP, SP, GAD worry, and GAD somatic distress, provided the best fit of the youth data as well as the parent data. Multiple group CFAs supported the metric invariance of the correlated five factor model across boys and girls. Thus, the present study’s finding supports the internal validity of DSM-IV SAD, SOP, and SP, but raises doubt regarding the internal validity of GAD.^

Aerodynamic Load Characteristics Evaluation and Tri-Axial Performance Testing on Fiber Reinforced Polymer Connections and Metal Fasteners to Promote Hurricane Damage Mitigation

Damages during extreme wind events highlight the weaknesses of mechanical fasteners at the roof-to-wall connections in residential timber frame buildings. The allowable capacity of the metal fasteners is based on results of unidirectional component testing that do not simulate realistic tri-axial aerodynamic loading effects. The first objective of this research was to simulate hurricane effects and study hurricane-structure interaction at full-scale, facilitating better understanding of the combined impacts of wind, rain, and debris on inter-component connections at spatial and temporal scales. The second objective was to evaluate the performance of a non-intrusive roof-to-wall connection system using fiber reinforced polymer (FRP) materials and compare its load capacity to the capacity of an existing metal fastener under simulated aerodynamic loads. The Wall of Wind (WoW) testing performed using FRP connections on a one-story gable-roof timber structure instrumented with a variety of sensors, was used to create a database on aerodynamic and aero-hydrodynamic loading on roof-to-wall connections tested under several parameters: angles of attack, wind-turbulence content, internal pressure conditions, with and without effects of rain. Based on the aerodynamic loading results obtained from WoW tests, sets of three force components (tri-axial mean loads) were combined into a series of resultant mean forces, which were used to test the FRP and metal connections in the structures laboratory up to failure. A new component testing system and test protocol were developed for testing fasteners under simulated tri-axial loading as opposed to uni-axial loading. The tri-axial and uni-axial test results were compared for hurricane clips. Also, comparison was made between tri-axial load capacity of FRP and metal connections. The research findings demonstrate that the FRP connection is a viable option for use in timber roof-to-wall connection system. Findings also confirm that current testing methods of mechanical fasteners tend to overestimate the actual load capacities of a connector. Additionally, the research also contributes to the development a new testing protocol for fasteners using tri-axial simultaneous loads based on the aerodynamic database obtained from the WoW testing.

Attributions and the Evaluation of Dynamic Performance

As research into the dynamic characteristics of job performance across time has continued to accumulate, associated implications for performance appraisal have become evident. At present, several studies have demonstrated that systematic trends in job performance across time influence how performance is ultimately judged. However, little research has considered the processes by which the performance trend-performance rating relationship occurs. In the present study, I addressed this gap. Specifically, drawing on attribution theory, I proposed and tested a model whereby the performance trend-performance rating relationship occurs through attributions to ability and effort. The results of this study indicated that attributions to ability, but not effort, mediate the relationship between performance trend and performance ratings and that this relationship depends on attribution-related cues. Implications for performance appraisal research and theory are discussed.