Capacity-based cost modeling for light rail and bus rapid transit systems

Choosing between Light Rail Transit (LRT) and Bus Rapid Transit (BRT) systems is often controversial and not an easy task for transportation planners who are contemplating the upgrade of their public transportation services. These two transit systems provide comparable services for medium-sized cities from the suburban neighborhood to the Central Business District (CBD) and utilize similar right-of-way (ROW) categories. The research is aimed at developing a method to assist transportation planners and decision makers in determining the most feasible system between LRT and BRT. ^ Cost estimation is a major factor when evaluating a transit system. Typically, LRT is more expensive to build and implement than BRT, but has significantly lower Operating and Maintenance (OM) costs than BRT. This dissertation examines the factors impacting capacity and costs, and develops cost models, which are a capacity-based cost estimate for the LRT and BRT systems. Various ROW categories and alignment configurations of the systems are also considered in the developed cost models. Kikuchi's fleet size model (1985) and cost allocation method are used to develop the cost models to estimate the capacity and costs. ^ The comparison between LRT and BRT are complicated due to many possible transportation planning and operation scenarios. In the end, a user-friendly computer interface integrated with the established capacity-based cost models, the LRT and BRT Cost Estimator (LBCostor), was developed by using Microsoft Visual Basic language to facilitate the process and will guide the users throughout the comparison operations. The cost models and the LBCostor can be used to analyze transit volumes, alignments, ROW configurations, number of stops and stations, headway, size of vehicle, and traffic signal timing at the intersections. The planners can make the necessary changes and adjustments depending on their operating practices. ^

Labor Cost Analysis for the Food Service Industry

There are many factors which can assist in controlling the cost of labor in the food service industry. The author discusses a number of these, including scheduling, establishing production standards, forecasting workloads, analyzing employee turnover, combating absenteeism, and controlling overtime.

Household Preferences for Financing Hurricane Risk Mitigation: A Survey Based Empirical Analysis

After a series of major storms over the last 20 years, the state of financing for U.S. natural disaster insurance has undergone substantial disruptions causing many federal and state backed programs against residential property damage to become severally underfunded. In order to regain actuarial soundness, policy makers have proposed a shift to a system that reflects risk-based pricing for property insurance. We examine survey responses from 1394 single-family homeowners in the state of Florida for support of several natural disaster mitigation policy reforms. Utilizing a partial proportional odds model we test for effects of location, risk perception, socio-economic and housing characteristics on support for policy reforms. Our findings suggest residents across the state, not just risk-prone homeowners, support the current subsidized model. We also examine several other policy questions from the survey to verify our initial results. Finally, the implications of our findings are discussed to provide inputs to policymakers.

Assessing the net effect of anthropogenic disturbance on aquatic communities in wetlands: community structure relative to distance from canals

Anthropogenic alterations of natural hydrology are common in wetlands and often increase water permanence, converting ephemeral habitats into permanent ones. Since aquatic organisms segregate strongly along hydroperiod gradients, added water permanence caused by canals can dramatically change the structure of aquatic communities. We examined the impact of canals on the abundance and structure of wetland communities in South Florida, USA. We sampled fishes and macroinvertebrates from marsh transects originating at canals in the central and southern Everglades. Density of all aquatic organisms sampled increased in the immediate proximity of canals, but was accompanied by few compositional changes based on analysis of relative abundance. Large fish (>8 cm), small fish (<8 >cm) and macroinvertebrates (>5 mm) increased in density within 5 m of canals. This pattern was most pronounced in the dry season, suggesting that canals may serve as dry-down refugia. Increases in aquatic animal density closely matched gradients of phosphorus enrichment that decreased with distance from canals. Thus, the most apparent impact of canals on adjacent marsh communities was as conduits for nutrients that stimulated local productivity; any impact of their role as sources of increased sources of predators was not apparent. The effect of predation close to canals was overcompensated by increased secondary productivity and/or immigration toward areas adjacent to canals in the dry season. Alternatively, the consumptive effect of predatory fishes using canals as dry-season refuges is very small or spread over the expanse of marshes with open access to canals.

Can Executive Skills Help Underachieving Bilingual Students? Pedagogical Implications

The author explores solutions for bilingual students’ underachievement by embedding elements of executive functioning into bilingual education. Based on analysis of theoretical perspectives, the author recommends teaching executive functions to bilingual students. Implications indicate the importance of embedding executive functions in curriculum development, textbook compiling, and instruction.

Metacommunity Structure Along Resource and Disturbance Gradients in Everglades Wetlands

We evaluated metacommunity hypotheses of landscape arrangement (indicative of dispersal limitation) and environmental gradients (hydroperiod and nutrients) in structuring macroinvertebrate and fish communities in the southern Everglades. We used samples collected at sites from the eastern boundary of the southern Everglades and from Shark River Slough, to evaluate the role of these factors in metacommunity structure. We used eigenfunction spatial analysis to model community structure among sites and distance-based redundancy analysis to partition the variability in communities between spatial and environmental filters. For most animal communities, hydrological parameters had a greater influence on structure than nutrient enrichment, however both had large effects. The influence of spatial effects indicative of dispersal limitation was weak and only periphyton infauna appeared to be limited by regional dispersal. At the landscape scale, communities were well-mixed, but strongly influenced by hydrology. Local-scale species dominance was influenced by water-permanence and nutrient enrichment. Nutrient enrichment is limited to water inflow points associated with canals, which may explain its impact in this data set. Hydroperiod and nutrient enrichment are controlled by water managers; our analysis indicates that the decisions they make have strong effects on the communities at the base of the Everglades food web.

Exoneration or Observation? Examining a Novel Difference Between Liars and Truth Tellers

Individual cues to deception are subtle and often missed by lay people and law enforcement alike. Linguistic statement analysis remains a potentially useful way of overcoming individual diagnostic limitations (e.g. Criteria based Content Analysis; Steller & Köhnken, 1989; Reality monitoring; Johnson & Raye, 1981; Scientific Content Analysis; Sapir, 1996). Unfortunately many of these procedures are time-consuming, require in-depth training, as well as lack empirical support and/or external validity. The current dissertation develops a novel approach to statement veracity analysis that is simple to learn, easy to administer, theoretically sound, and empirically validated. Two strategies were proposed for detecting differences between liars' and truth-tellers' statements. Liars were hypothesized to strategically write statements with the goal of self-exoneration. Liars' statements were predicted to contain more first person pronouns and fewer third person pronouns. Truth-tellers were hypothesized to be motivated toward being informative and thus produce statements with fewer first person pronouns and more third person pronouns. Three studies were conducted to test this hypothesis. The first study explored the verbal patterns of exoneration and informativeness focused statements. The second study used a traditional theft paradigm to examine these verbal patterns in guilty liars and innocent truth tellers. In the third study to better match the context of a criminal investigation a cheating paradigm was used in which spontaneous lying was induced and written statements were taken. Support for the first person pronoun hypothesis was found. Limited support was found for the third person pronoun hypothesis. Results, implications, and future directions for the current research are discussed.

Exoneration or observation? Examining a novel difference between liars and truth tellers

Individual cues to deception are subtle and often missed by lay people and law enforcement alike. Linguistic statement analysis remains a potentially useful way of overcoming individual diagnostic limitations (e.g. Criteria based Content Analysis; Steller & Köhnken, 1989; Reality monitoring; Johnson & Raye, 1981; Scientific Content Analysis; Sapir, 1996). Unfortunately many of these procedures are time-consuming, require in-depth training, as well as lack empirical support and/or external validity. The current dissertation develops a novel approach to statement veracity analysis that is simple to learn, easy to administer, theoretically sound, and empirically validated. ^ Two strategies were proposed for detecting differences between liars' and truth-tellers' statements. Liars were hypothesized to strategically write statements with the goal of self-exoneration. Liars' statements were predicted to contain more first person pronouns and fewer third person pronouns. Truth-tellers were hypothesized to be motivated toward being informative and thus produce statements with fewer first person pronouns and more third person pronouns. Three studies were conducted to test this hypothesis. The first study explored the verbal patterns of exoneration and informativeness focused statements. The second study used a traditional theft paradigm to examine these verbal patterns in guilty liars and innocent truth tellers. In the third study to better match the context of a criminal investigation a cheating paradigm was used in which spontaneous lying was induced and written statements were taken. Support for the first person pronoun hypothesis was found. Limited support was found for the third person pronoun hypothesis. Results, implications, and future directions for the current research are discussed.^

An exergy based engineering and economic analysis of sustainable building

To achieve the goal of sustainable development, the building energy system was evaluated from both the first and second law of thermodynamics point of view. The relationship between exergy destruction and sustainable development were discussed at first, followed by the description of the resource abundance model, the life cycle analysis model and the economic investment effectiveness model. By combining the forgoing models, a new sustainable index was proposed. Several green building case studies in U.S. and China were presented. The influences of building function, geographic location, climate pattern, the regional energy structure, and the technology improvement potential of renewable energy in the future were discussed. The building’s envelope, HVAC system, on-site renewable energy system life cycle analysis from energy, exergy, environmental and economic perspective were compared. It was found that climate pattern had a dramatic influence on the life cycle investment effectiveness of the building envelope. The building HVAC system energy performance was much better than its exergy performance. To further increase the exergy efficiency, renewable energy rather than fossil fuel should be used as the primary energy. A building life cycle cost and exergy consumption regression model was set up. The optimal building insulation level could be affected by either cost minimization or exergy consumption minimization approach. The exergy approach would cause better insulation than cost approach. The influence of energy price on the system selection strategy was discussed. Two photovoltaics (PV) systems—stand alone and grid tied system were compared by the life cycle assessment method. The superiority of the latter one was quite obvious. The analysis also showed that during its life span PV technology was less attractive economically because the electricity price in U.S. and China did not fully reflect the environmental burden associated with it. However if future energy price surges and PV system cost reductions were considered, the technology could be very promising for sustainable buildings in the future.

Reliability analysis of encapsulation methods for lead -based paint through an accelerated life testing

The adverse health effects of long-term exposure to lead are well established, with major uptake into the human body occurring mainly through oral ingestion by young children. Lead-based paint was frequently used in homes built before 1978, particularly in inner-city areas. Minority populations experience the effects of lead poisoning disproportionately. ^ Lead-based paint abatement is costly. In the United States, residents of about 400,000 homes, occupied by 900,000 young children, lack the means to correct lead-based paint hazards. The magnitude of this problem demands research on affordable methods of hazard control. One method is encapsulation, defined as any covering or coating that acts as a permanent barrier between the lead-based paint surface and the environment. ^ Two encapsulants were tested for reliability and effective life span through an accelerated lifetime experiment that applied stresses exceeding those encountered under normal use conditions. The resulting time-to-failure data were used to extrapolate the failure time under conditions of normal use. Statistical analysis and models of the test data allow forecasting of long-term reliability relative to the 20-year encapsulation requirement. Typical housing material specimens simulating walls and doors coated with lead-based paint were overstressed before encapsulation. A second, un-aged set was also tested. Specimens were monitored after the stress test with a surface chemical testing pad to identify the presence of lead breaking through the encapsulant. ^ Graphical analysis proposed by Shapiro and Meeker and the general log-linear model developed by Cox were used to obtain results. Findings for the 80% reliability time to failure varied, with close to 21 years of life under normal use conditions for encapsulant A. The application of product A on the aged gypsum and aged wood substrates yielded slightly lower times. Encapsulant B had an 80% reliable life of 19.78 years. ^ This study reveals that encapsulation technologies can offer safe and effective control of lead-based paint hazards and may be less expensive than other options. The U.S. Department of Health and Human Services and the CDC are committed to eliminating childhood lead poisoning by 2010. This ambitious target is feasible, provided there is an efficient application of innovative technology, a goal to which this study aims to contribute. ^

Development, validation and uncertainty analysis of quantitative structure and activity relationship models for Log P of disinfection by -products

Hydrophobicity as measured by Log P is an important molecular property related to toxicity and carcinogenicity. With increasing public health concerns for the effects of Disinfection By-Products (DBPs), there are considerable benefits in developing Quantitative Structure and Activity Relationship (QSAR) models capable of accurately predicting Log P. In this research, Log P values of 173 DBP compounds in 6 functional classes were used to develop QSAR models, by applying 3 molecular descriptors, namely, Energy of the Lowest Unoccupied Molecular Orbital (ELUMO), Number of Chlorine (NCl) and Number of Carbon (NC) by Multiple Linear Regression (MLR) analysis. The QSAR models developed were validated based on the Organization for Economic Co-operation and Development (OECD) principles. The model Applicability Domain (AD) and mechanistic interpretation were explored. Considering the very complex nature of DBPs, the established QSAR models performed very well with respect to goodness-of-fit, robustness and predictability. The predicted values of Log P of DBPs by the QSAR models were found to be significant with a correlation coefficient R2 from 81% to 98%. The Leverage Approach by Williams Plot was applied to detect and remove outliers, consequently increasing R 2 by approximately 2% to 13% for different DBP classes. The developed QSAR models were statistically validated for their predictive power by the Leave-One-Out (LOO) and Leave-Many-Out (LMO) cross validation methods. Finally, Monte Carlo simulation was used to assess the variations and inherent uncertainties in the QSAR models of Log P and determine the most influential parameters in connection with Log P prediction. The developed QSAR models in this dissertation will have a broad applicability domain because the research data set covered six out of eight common DBP classes, including halogenated alkane, halogenated alkene, halogenated aromatic, halogenated aldehyde, halogenated ketone, and halogenated carboxylic acid, which have been brought to the attention of regulatory agencies in recent years. Furthermore, the QSAR models are suitable to be used for prediction of similar DBP compounds within the same applicability domain. The selection and integration of various methodologies developed in this research may also benefit future research in similar fields.

Ex Ante Cost Benefit Analyses of Community-Based DRR Interventions in the Caribbean

This report presents a study on the cost benefit analyses (CBA) and cost effectiveness analysis (CEA) of community-based disaster risk reduction (DRR) interventions in the Caribbean. The DRR interventions, implemented by the International Federation of Red Cross (IFRC), Port of Spain, in three Caribbean countries, Jamaica, Antigua & Barbuda, and Suriname, comprised the pilot phase of the Red Cross (RC) Project, Improving Climate Change Resilience of Caribbean Communities. This study is part of the endeavor by the DRR Program of Florida International University (FIU) and the United States Agency for International Development’s Office of the U.S. Foreign Disaster Assistance (USAID/OFDA) to develop and foster DRR measures in the Latin American and Caribbean region since 2008.

Time, Cost, and Environmental Impact Analysis for Sustainable Design at Multiple Building Levels

Construction projects are complex endeavors that require the involvement of different professional disciplines in order to meet various project objectives that are often conflicting. The level of complexity and the multi-objective nature of construction projects lend themselves to collaborative design and construction such as integrated project delivery (IPD), in which relevant disciplines work together during project conception, design and construction. Traditionally, the main objectives of construction projects have been to build in the least amount of time with the lowest cost possible, thus the inherent and well-established relationship between cost and time has been the focus of many studies. The importance of being able to effectively model relationships among multiple objectives in building construction has been emphasized in a wide range of research. In general, the trade-off relationship between time and cost is well understood and there is ample research on the subject. However, despite sustainable building designs, relationships between time and environmental impact, as well as cost and environmental impact, have not been fully investigated. The objectives of this research were mainly to analyze and identify relationships of time, cost, and environmental impact, in terms of CO2 emissions, at different levels of a building: material level, component level, and building level, at the pre-use phase, including manufacturing and construction, and the relationships of life cycle cost and life cycle CO2 emissions at the usage phase. Additionally, this research aimed to develop a robust simulation-based multi-objective decision-support tool, called SimulEICon, which took construction data uncertainty into account, and was capable of incorporating life cycle assessment information to the decision-making process. The findings of this research supported the trade-off relationship between time and cost at different building levels. Moreover, the time and CO2 emissions relationship presented trade-off behavior at the pre-use phase. The results of the relationship between cost and CO2 emissions were interestingly proportional at the pre-use phase. The same pattern continually presented after the construction to the usage phase. Understanding the relationships between those objectives is a key in successfully planning and designing environmentally sustainable construction projects.

An Exergy Based Engineering and Economic Analysis of Sustainable Building

To achieve the goal of sustainable development, the building energy system was evaluated from both the first and second law of thermodynamics point of view. The relationship between exergy destruction and sustainable development were discussed at first, followed by the description of the resource abundance model, the life cycle analysis model and the economic investment effectiveness model. By combining the forgoing models, a new sustainable index was proposed. Several green building case studies in U.S. and China were presented. The influences of building function, geographic location, climate pattern, the regional energy structure, and the technology improvement potential of renewable energy in the future were discussed. The building’s envelope, HVAC system, on-site renewable energy system life cycle analysis from energy, exergy, environmental and economic perspective were compared. It was found that climate pattern had a dramatic influence on the life cycle investment effectiveness of the building envelope. The building HVAC system energy performance was much better than its exergy performance. To further increase the exergy efficiency, renewable energy rather than fossil fuel should be used as the primary energy. A building life cycle cost and exergy consumption regression model was set up. The optimal building insulation level could be affected by either cost minimization or exergy consumption minimization approach. The exergy approach would cause better insulation than cost approach. The influence of energy price on the system selection strategy was discussed. Two photovoltaics (PV) systems – stand alone and grid tied system were compared by the life cycle assessment method. The superiority of the latter one was quite obvious. The analysis also showed that during its life span PV technology was less attractive economically because the electricity price in U.S. and China did not fully reflect the environmental burden associated with it. However if future energy price surges and PV system cost reductions were considered, the technology could be very promising for sustainable buildings in the future.