Large-Scale Testing to Study the Effects of Critical Parameters on the Aerodynamic Behavior of Long Span Bridges

Long-span bridges are flexible and therefore are sensitive to wind induced effects. One way to improve the stability of long span bridges against flutter is to use cross-sections that involve twin side-by-side decks. However, this can amplify responses due to vortex induced oscillations. Wind tunnel testing is a well-established practice to evaluate the stability of bridges against wind loads. In order to study the response of the prototype in laboratory, dynamic similarity requirements should be satisfied. One of the parameters that is normally violated in wind tunnel testing is Reynolds number. In this dissertation, the effects of Reynolds number on the aerodynamics of a double deck bridge were evaluated by measuring fluctuating forces on a motionless sectional model of a bridge at different wind speeds representing different Reynolds regimes. Also, the efficacy of vortex mitigation devices was evaluated at different Reynolds number regimes. One other parameter that is frequently ignored in wind tunnel studies is the correct simulation of turbulence characteristics. Due to the difficulties in simulating flow with large turbulence length scale on a sectional model, wind tunnel tests are often performed in smooth flow as a conservative approach. The validity of simplifying assumptions in calculation of buffeting loads, as the direct impact of turbulence, needs to be verified for twin deck bridges. The effects of turbulence characteristics were investigated by testing sectional models of a twin deck bridge under two different turbulent flow conditions. Not only the flow properties play an important role on the aerodynamic response of the bridge, but also the geometry of the cross section shape is expected to have significant effects. In this dissertation, the effects of deck details, such as width of the gap between the twin decks, and traffic barriers on the aerodynamic characteristics of a twin deck bridge were investigated, particularly on the vortex shedding forces with the aim of clarifying how these shape details can alter the wind induced responses. Finally, a summary of the issues that are involved in designing a dynamic test rig for high Reynolds number tests is given, using the studied cross section as an example.

Wildfire Assessment Using FARSITE Fire Modeling: A Case Study in the Chihuahua Desert of Mexico

The Chihuahua desert is one of the most biologically diverse ecosystems in the world, but suffers serious degradation because of changes in fire regimes resulting in large catastrophic fires. My study was conducted in the Sierra La Mojonera (SLM) natural protected area in Mexico. The purpose of this study was to implement the use of FARSITE fire modeling as a fire management tool to develop an integrated fire management plan at SLM. Firebreaks proved to detain 100% of wildfire outbreaks. The rosetophilous scrub experienced the fastest rate of fire spread and lowland creosote bush scrub experienced the slowest rate of fire spread. March experienced the fastest rate of fire spread, while September experienced the slowest rate of fire spread. The results of my study provide a tool for wildfire management through the use geospatial technologies and, in particular, FARSITE fire modeling in SLM and Mexico.

The impact of selected factors in nurses' attitudes toward bedside computers

The purpose of this study was to determine the impact of selected factors on nurses' attitudes toward bedside computers. Bedside computer systems, also referred to as point-of-care systems, are clinical information systems that allow documentation of patient care and retrieval of data at the patient's bedside, or in close proximity to where care is delivered. The adoption of bedside computer systems appears to be increasing among U.S. institutions. As healthcare institutions undertake automation projects, they face many challenges associated with implementing large-scale change. ^ The study explored four factors and their relationship to nurses' attitudes toward bedside computers. A pre-bedside implementation survey of 184 staff nurses did not demonstrate a relationship between previous computer experience and nurses' attitudes toward bedside computers (p > .05). The data did not indicate a relationship between nurses' formal education and their attitude toward bedside computers (p > .05). The data did support a relationship between nurses' previous computer experience and their comfort in the use of bedside computers (p < .0005). Using a quasi-experimental control group design, attitudes of nurses were studied over an 18 month period. The Pre versus Post Survey data indicated that nurses who used bedside computers, the experimental group, had more positive attitudes than the nurses who did not use bedside computers, the control group (p < .0005). ^ The findings are significant to institutions implementing bedside computers, to the human resource development staff overseeing bedside computer training, and to the practice of clinical nursing. ^

Analysis of the lateral diffuse metal-oxide semiconductor (LDMOS) power amplifier for cellular base stations

The primary purpose of this thesis was to present a theoretical large-signal analysis to study the power gain and efficiency of a microwave power amplifier for LS-band communications using software simulation. Power gain, efficiency, reliability, and stability are important characteristics in the power amplifier design process. These characteristics affect advance wireless systems, which require low-cost device amplification without sacrificing system performance. Large-signal modeling and input and output matching components are used for this thesis. Motorola's Electro Thermal LDMOS model is a new transistor model that includes self-heating affects and is capable of small-large signal simulations. It allows for most of the design considerations to be on stability, power gain, bandwidth, and DC requirements. The matching technique allows for the gain to be maximized at a specific target frequency. Calculations and simulations for the microwave power amplifier design were performed using Matlab and Microwave Office respectively. Microwave Office is the simulation software used in this thesis. The study demonstrated that Motorola's Electro Thermal LDMOS transistor in microwave power amplifier design process is a viable solution for common-source amplifier applications in high power base stations. The MET-LDMOS met the stability requirements for the specified frequency range without a stability-improvement model. The power gain of the amplifier circuit was improved through proper microwave matching design using input/output-matching techniques. The gain and efficiency of the amplifier improve approximately 4dB and 7.27% respectively. The gain value is roughly .89 dB higher than the maximum gain specified by the MRF21010 data sheet specifications. This work can lead to efficient modeling and development of high power LDMOS transistor implementations in commercial and industry applications.

A longitudinal study of Project Trio: A dropout prevention program in a large urban environment

The subject of dropout prevention/reduction is deservedly receiving attention as a problem that, if not resolved, could threaten our national future.^ This study investigates a small segment of the overall dropout problem, which has apparently unique features of program design and population selection. The evidence presented here should add to the knowledge bank of this complicated problem.^ Project Trio was one of a number of dropout prevention programs and activities which were conducted in Dade County school years 1984-85 and 1985-86, and it is here investigated longitudinally through the end of the 1987-88 school year. It involved 17 junior and senior high schools, and 27 programs, 10 the first year and 17 the second, with over 1,000 total students, who had been selected by the schools from a list of the "at risk" students provided by the district, and were divided approximately evenly into the classical research design of an experimental group and the control group, which following standard procedure was to take the regular school curriculum. No school had more than 25 students in either group.^ Each school modified the basic design of the project to accommodate the individual school characteristics and the perceived needs of their students; however all schools projects were to include some form of academic enhancement, counseling and career awareness study.^ The conclusion of this study was that the control group had a significantly lower dropout rate than the experimental group. Though impossible to make a certain determination of the reasons for this unexpected result, it appears from evidence presented that one cause may have been inadequate administration at the local level.^ This study was also a longitudinal investigation of the "at risk" population as a whole for the three and four year period, to determine if academic factors were present in records may be used to identify dropout proneness.^ A significant correlation was found between dropping out and various measures including scores on the Quality of School Life Instrument, attendance, grade point averages, mathematics grades, and overage in grade, important identifiers in selection for dropout prevention programs. ^

The Study of Sonar for Imaging of the Solid-Liquid Interface Inside Large Tanks

Retrieval, treatment, and disposal of high-level radioactive waste (HLW) is expected to cost between 100 and 300 billion dollars. The risk to workers, public health, and the environment are also a major area of concern for HLW. Visualization of the interface between settled solids and the optically opaque liquid is needed for retrieval of the waste from underground storage tanks. A Profiling sonar selected for this research generates 2-D image of the interface. Multiple experiments were performed to demonstrate the effectiveness of sonar in real-time monitoring the interface inside HLW tanks. First set of experiments demonstrated that objects shapes could be identified even when 30% of solids entrained in liquid, thereby mapping the interface. Simulation of sonar system validated these results. Second set of experiments confirmed the sonar’s ability in detecting the solids with density similar to the immersed liquid. Third set of experiments determined the affects of near by objects on image resolution. Final set of experiments proved the functional and chemical capabilities of sonar in caustic solution.