Enhanced biocompatibility of Nitinol via surface treatment and alloying

It is projected that by 2020, there will be 138 million Americans over 45, the age at which the increased incidence of heart diseases is documented. Many will require stents. This multi-billion dollar industry, with over 2 million patients worldwide, 15% of whom use Nitinol stents have experienced a decline in sales recently, due in part to thrombosis. It is a sudden blood clot that forms inside stents. As a result, the Food and Drug Administration and American Heart Association are calling for a new generation of stents, new designs and different alloys that are more adaptable to the arteries. The future of Nitinol therefore depends on a better understanding of the mechanisms by which Nitinol surfaces can be rendered stable and inert. In this investigation, binary and ternary Nitinol alloys were prepared and subjected to various surface treatments such as electropolishing (EP), magnetoelectropolishing (MEP) and water boiling & passivation (W&P). In vitro corrosion tests were conducted on Nitinol alloys in accordance with ASTM F 2129-08. The metal ions released into the electrolyte during corrosion tests were measured by Inductively Coupled Plasma Mass Spectroscopy (ICP-MS). Biocompatibility was assessed by observing the growth of human umbilical vein endothelial cells (HUVEC) on the surface of Nitinol alloys. Static and dynamic immersion tests were performed by immersing the Nitinol alloys in cell culture media and measuring the amount of metal ions released in solution. Sulforhodamine B (SRB) assays were performed to elucidate the effect of metal ions on the growth of HUVEC cells. The surfaces of the alloys were studied using Scanning Electron Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS) respectively. Finally, wettability and surface energy were measured by Contact Angle Meter, whereas surface roughness was measured by Atomic Force Microscopy (AFM). All the surface treated alloys exhibited high resistance to corrosion when compared with untreated alloys. SRB assays revealed that Ni and Cu ions exhibited greater toxicity than Cr, Ta and Ti ions on HUVEC cells. EP and MEP alloys possessed relatively smooth surfaces and some were composed of nickel oxides instead of elemental nickel as determined by XPS. MEP exhibited lowest surface energy and lowest surface roughness.

Enhanced Biocompatibility of NiTi (Nitinol) Via Surface Treatment and Alloying

It is projected that by 2020, there will be 138 million Americans over 45, the age at which the increased incidence of heart diseases is documented. Many will require stents. This multi-billion dollar industry, with over 2 million patients worldwide, 15% of whom use Nitinol stents have experienced a decline in sales recently, due in part to thrombosis. It is a sudden blood clot that forms inside stents. As a result, the Food and Drug Administration and American Heart Association are calling for a new generation of stents, new designs and different alloys that are more adaptable to the arteries. The future of Nitinol therefore depends on a better understanding of the mechanisms by which Nitinol surfaces can be rendered stable and inert. In this investigation, binary and ternary Nitinol alloys were prepared and subjected to various surface treatments such as electropolishing (EP), magnetoelectropolishing (MEP) and water boiling & passivation (W&P). In vitro corrosion tests were conducted on Nitinol alloys in accordance with ASTM F 2129-08. The metal ions released into the electrolyte during corrosion tests were measured by Inductively Coupled Plasma Mass Spectroscopy (ICP-MS). Biocompatibility was assessed by observing the growth of human umbilical vein endothelial cells (HUVEC) on the surface of Nitinol alloys. Static and dynamic immersion tests were performed by immersing the Nitinol alloys in cell culture media and measuring the amount of metal ions released in solution. Sulforhodamine B (SRB) assays were performed to elucidate the effect of metal ions on the growth of HUVEC cells. The surfaces of the alloys were studied using Scanning Electron Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS) respectively. Finally, wettability and surface energy were measured by Contact Angle Meter, whereas surface roughness was measured by Atomic Force Microscopy (AFM). All the surface treated alloys exhibited high resistance to corrosion when compared with untreated alloys. SRB assays revealed that Ni and Cu ions exhibited greater toxicity than Cr, Ta and Ti ions on HUVEC cells. EP and MEP alloys possessed relatively smooth surfaces and some were composed of nickel oxides instead of elemental nickel as determined by XPS. MEP exhibited lowest surface energy and lowest surface roughness.

Process inventory and pollution prevention overview for the citrus industry

Florida citrus represents approximately 70 percent of the industry production in the United States; therefore, any associated agricultural and industrial contamination is of concern and a focus of attention. The use of synthetic organic chemicals has become a farmer's necessity in order to supply consumers with high quality products, free of pest damage. However, industrial citrus wastes and chemical residual levels worry not only government agencies but also consumers since they indicate a serious habitat risk. This study assesses citrus industrial processes and the paths that chemical substances follow from the time the citrus seed is planted until consumers get a final product as either fresh fruit or processed product. The study is built on information from United States Environmental Protection Agency (US EPA) manuals, Dade County Environmental Resources Management (DERM) inspection records, United States Food and Drug Administration (US FDA) regulations, Florida standards, journal publications, and research reports. Pollution prevention (P2 or prevention-of-pollution) alternatives are identified; alternatives are proposed, evaluated, and included. Strategies are described and pollution prevention opportunities proposed to minimize citrus wastes generation, chemical residuals in products, their environmental impact and health risk aspects while maximizing product quality.

Qualitative Responses to Pre-employment Drug Testing in the Foodservice Industry

Employee substance abuse has long time been a topic of concern for the hospitality industry. Operating under the assumption that drug-users, and associated undesirable behavior, can be eliminated from the hiring process, many operations have adopted pre-employment drug-testing policies. Despite being represented across the industry as a major target of effort and resources, it is suggested that the perceived sensitive-nature of the subject has somewhat hindered access to qualitative information. The purpose of this research was to assess and explore the attitudes, beliefs and perceptions of both management and employees in the foodservice industry regarding pre-employment drug-testing and its impact on work performance. Through the use of a phenomenological survey, qualitative data was collected then used to identify themes in participants’ perceptions of such screening policies and their effects. Results and implications of these findings are discussed.

Implementing Employee Drug and Alcohol Testing: Implications for Hotel Managers

Abuse of drugs and alcohol in the workplace has reached epidemic proportions in the hotel industry. The authors review considerations for drug testing and discuss drug and alcohol testing methods and the manner in which an effective policy should be developed.

Drug Abuse in the Hospitality Industry

Drug and alcohol abuse in the hospitality industry is an ongoing problem, reflective of business as a whole. A series of surveys were conducted at national drug rehabilitation centers seeking information from patients currently or formerly employed in the hotel and restaurant industry. The author identifies a number of problem indicators and makes recommendations relevant to resolutions.

``This is your brain on drugs'': The public policy of anti -drug programming. An exploratory analysis of media and other sources of drug information for adolescents

In the 1980s, government agencies sought to utilize research on drug use prevention to design media campaigns. Enlisting the assistance of the national media, several campaigns were designed and initiated to bring anti-drug use messages to adolescents in the form of public service advertising. This research explores the sources of information selected by adolescents in grades 7 through 12 and how the selection of media and other sources of information relate to drug use behavior and attitudes and perceptions related to risk/harm and disapproval of friends' drug-using activities.^ Data collected from 1989 to 1992 in the Miami Coalition School Survey provided a random selection of secondary school studies. The responses of these students were analyzed using multivariate statistical techniques.^ Although many of the students selected media as the source for most of their information on the effects of drugs on the people who use them, the selection of media was found to be positively related to alcohol use and negatively related to marijuana use. The selection of friends, brothers, or sisters was a statistically significant source for adolescents who smoke cigarettes, use alcohol or marijuana.^ The results indicate that the anti-drug use messages received by students may be canceled out by media messages perceived to advocate substance use and that a more persuasive source of information for adolescents may be friends and siblings. As federal reports suggest that the economic costs of drug abuse will reach an estimated $150 billion by 1997 if current trends continue, prevention policy that addresses the glamorization of substance use remains a national priority. Additionally, programs that advocate prevention within the peer cluster must be supported, as peers are an influential source for both inspiring and possibly preventing drug use behavior. ^