Developing a high density platinum/alumina hermetic feedthrough

Typically, hermetic feedthroughs for implantable devices, such as pacemakers, use a alumina ceramic insulator brazed to a platinum wire pin. This combination of material has a long history in implantable devices and has been approved by the FDA for implantable hermetic feedthroughs. The growing demand for increased input/output (I/O) hermetic feedthroughs for implantable neural stimulator applications could be addressed by developing a new, cofired platinum/alumina multilayer ceramic technology in a configuration that supports 300 plus I/Os, which is not commercially available. Seven platinum powders with different particle sizes were used to develop different conductive cofire inks to control the densification mismatch between platinum and alumina. Firing profile (ramp rate, burn- out and holding times) and firing atmosphere and concentrations (hydrogen (wet/dry), air, neutral, vacuum) were also optimized. Platinum and alumina exhibit the alloy formation reaction in a reduced atmosphere. Formation of any compound can increase the bonding of the metal/ceramic interface, resulting in enhanced hermeticity. The feedthrough fabricated in a reduced atmosphere demonstrated significantly superior performance than that of other atmospheres. A composite structure of tungsten/platinum ratios graded thru the via structure (pure W, 50/50 W/Pt, 80/20 Pt/W and pure Pt) exhibited the best performance in comparison to the performance of other materials used for ink metallization. Studies on the high temperature reaction of platinum and alumina, previously unreported, showed that, at low temperatures in reduced atmosphere, Pt 3Al or Pt8Al21 with a tetragonal structure would be formed. Cubic Pt3Al is formed upon heating the sample to temperatures above 1350 °C. This cubic structure is the equilibrium state of Pt-Al alloy at high temperatures. The alumina dissolves into the platinum ink and is redeposited as a surface coating. This was observed on both cofired samples and pure platinum thin films coated on a 99.6 Wt% alumina and fired at 1550 °C. Different mechanisms are proposed to describe this behavior based on the size of the platinum particle

Demographic, Behavioral and Perceptual Comparisons of U.S Visitor Experience with Group Package Tours and Free Independent Travel to China

U.S. visitor demand for the China travel experience is anticipated to rise significantly through 2105, causing the Chinese government to employ 100 million service providers over the next six years and raising concern about service delivery and perceptions of the on-site China experience. In an effort to better understand these issues concerning U.S. visitors, this study investigated two specific types of U.S. travelers to China: Group Package Tour (GPT) visitors and Free Independent Travel (FIT) visitors. Results indicated that GPT visitors were more likely to be older and have higher household income than FIT visitors. Four trip-related characteristics of GPT and FIT visitors were found to be significantly different, with GPT visitors showing higher levels of satisfaction with the overall China on-site travel experience.

The Effectiveness of an Intervention Package on Math Computation

Abstract: Four second-grade students participated in a B-A-B withdrawal single-subject design experiment. The intervention package implemented consisted of three components: self-monitoring, performance feedback, and reinforcers. Participants completed math probes across phases. Accuracy and productivity was recorded and calculated. Results demonstrated the intervention package improved accuracy and productivity for all participants.