Black band disease of corals: Ecology and physiology of Phormidium corallyticum

Black band disease of corals consists of a microbial community dominated by the cyanobacteriurn Phormidium corallyticum. The disease primarily affects reef-framework coral species, Active black band disease continually opens up new substrate in reef environments by destroying coral tissue as the disease line advances across the surface of infected colonies. A field study was carried out to determine the abundance and distribution of black band disease on the reef building corals in the Florida Keys. During July of 1992 and 1993, up to 0.72% of coral colonies were infected with black band disease. Analysis of the distribution showed that the disease was clumped. Seasonal patters varied, with some coral colonies infected year round, others exhibiting reinfection from summer 1992 to summer 1993, and some colonies infected for one year only. Statistical analysis of black band disease incidence in relation to various environmental parameters revealed that black band disease was associated with relatively shallow water depths, higher temperatures, elevated nitrite levels, and decreased ortho-phosphate levels. Additional field studies determined recovery of scleractinian coral colonies damaged or killed through the activities of black band disease over a five-year period. These studies determined if the newly exposed substrate was recolonized through scleractinian recruitment, if there was overgrowth of the damaged areas by the formerly diseased colony, or if coral tissue destruction continued after the cessation of black band disease activity. Tissue loss continued on all coral colonies with only one colony exhibiting new tissue growth. The majority of recolonization was by non-reef-framework corals and octocorallians, limited recruitment by framework species was observed. Physiological studies of P. corallyticum were carried out to investigate the photosynthetic capacity of this cyanobacterium, and to determine if this species has the ability to fix dinitrogen. The results of this research demonstrated that P. corallyticum reaches maximum photosynthetic rates at very low light intensities (27.9 μE/m/sec), and that P. corallyticum is able to carry out oxygenic photosynthesis in the presence of sulfide, an ability that is uncommon in prokaryotic organisms. ^

Slow Isotope Turnover Rates and Low Discrimination Values in the American Alligator: Implications for Interpretation of Ectotherm Stable Isotope Data

Stable isotope analysis has become a standard ecological tool for elucidating feeding relationships of organisms and determining food web structure and connectivity. There remain important questions concerning rates at which stable isotope values are incorporated into tissues (turnover rates) and the change in isotope value between a tissue and a food source (discrimination values). These gaps in our understanding necessitate experimental studies to adequately interpret field data. Tissue turnover rates and discrimination values vary among species and have been investigated in a broad array of taxa. However, little attention has been paid to ectothermic top predators in this regard. We quantified the turnover rates and discrimination values for three tissues (scutes, red blood cells, and plasma) in American alligators (Alligator mississippiensis). Plasma turned over faster than scutes or red blood cells, but turnover rates of all three tissues were very slow in comparison to those in endothermic species. Alligator δ15N discrimination values were surprisingly low in comparison to those of other top predators and varied between experimental and control alligators. The variability of δ15N discrimination values highlights the difficulties in using δ15N to assign absolute and possibly even relative trophic levels in field studies. Our results suggest that interpreting stable isotope data based on parameter estimates from other species can be problematic and that large ectothermic tetrapod tissues may be characterized by unique stable isotope dynamics relative to species occupying lower trophic levels and endothermic tetrapods.

The State of our Toolbox: A Meta-analysis of Reliability Measurement Precision

My study investigated internal consistency estimates of psychometric surveys as an operationalization of the state of measurement precision of constructs in industrial and organizational (I/O) psychology. Analyses were conducted of samples used in research articles published in the Journal of Applied Psychology between 1975 and 2010 in five year intervals (K = 934) from 480 articles yielding 1427 coefficients. Articles and their respective samples were coded for test-taker characteristics (e.g., age, gender, and ethnicity), research settings (e.g., lab and field studies), and actual tests (e.g., number of items and scale anchor points). A reliability and inter-item correlations depository was developed for I/O variables and construct groups. Personality measures had significantly lower inter-item correlations than other construct groups. Also, internal consistency estimates and reporting practices were evaluated over time, demonstrating an improvement in measurement precision and missing data.

Effect of Pavement-Vehicle Interaction on Highway Fuel Consumption and Emission

Vehicle fuel consumption and emission are two important effectiveness measurements of sustainable transportation development. Pavement plays an essential role in goals of fuel economy improvement and greenhouse gas (GHG) emission reduction. The main objective of this dissertation study is to experimentally investigate the effect of pavement-vehicle interaction (PVI) on vehicle fuel consumption under highway driving conditions. The goal is to provide a better understanding on the role of pavement in the green transportation initiates. Four study phases are carried out. The first phase involves a preliminary field investigation to detect the fuel consumption differences between paired flexible-rigid pavement sections with repeat measurements. The second phase continues the field investigation by a more detailed and comprehensive experimental design and independently investigates the effect of pavement type on vehicle fuel consumption. The third study phase calibrates the HDM-IV fuel consumption model with data collected in the second field phase. The purpose is to understand how pavement deflection affects vehicle fuel consumption from a mechanistic approach. The last phase applies the calibrated HDM-IV model to Florida’s interstate network and estimates the total annual fuel consumption and CO2 emissions on different scenarios. The potential annual fuel savings and emission reductions are derived based on the estimation results. Statistical results from the two field studies both show fuel savings on rigid pavement compared to flexible pavement with the test conditions specified. The savings derived from the first phase are 2.50% for the passenger car at 112km/h, and 4.04% for 18-wheel tractor-trailer at 93km/h. The savings resulted from the second phase are 2.25% and 2.22% for passenger car at 93km/h and 112km/h, and 3.57% and 3.15% for the 6-wheel medium-duty truck at 89km/h and 105km/h. All savings are statistically significant at 95% Confidence Level (C.L.). From the calibrated HDM-IV model, one unit of pavement deflection (1mm) on flexible pavement can cause an excess fuel consumption by 0.234-0.311 L/100km for the passenger car and by 1.123-1.277 L/100km for the truck. The effect is more evident at lower highway speed than at higher highway speed. From the network level estimation, approximately 40 million gallons of fuel (combined gasoline and diesel) and 0.39 million tons of CO2 emission can be saved/reduced annually if all Florida’s interstate flexible pavement are converted to rigid pavement with the same roughness levels. Moreover, each 1-mile of flexible-rigid conversion can result in a reduction of 29 thousand gallons of fuel and 258 tons of CO2 emission yearly.

An examination of Lotka's law in the field of Library and Information Studies

The purpose of this study was to test Lotka’s law of scientific publication productivity using the methodology outlined by Pao (1985), in the field of Library and Information Studies (LIS). Lotka’s law has been sporadically tested in the field over the past 30+ years, but the results of these studies are inconclusive due to the varying methods employed by the researchers. ^ A data set of 1,856 citations that were found using the ISI Web of Knowledge databases were studied. The values of n and c were calculated to be 2.1 and 0.6418 (64.18%) respectively. The Kolmogorov-Smirnov (K-S) one sample goodness-of-fit test was conducted at the 0.10 level of significance. The Dmax value is 0.022758 and the calculated critical value is 0.026562. It was determined that the null hypothesis stating that there is no difference in the observed distribution of publications and the distribution obtained using Lotka’s and Pao’s procedure could not be rejected. ^ This study finds that literature in the field of Library and Information Studies does conform to Lotka’s law with reliable results. As result, Lotka’s law can be used in LIS as a standardized means of measuring author publication productivity which will lead to findings that are comparable on many levels (e.g., department, institution, national). Lotka’s law can be employed as an empirically proven analytical tool to establish publication productivity benchmarks for faculty and faculty librarians. Recommendations for further study include (a) exploring the characteristics of the high and low producers; (b) finding a way to successfully account for collaborative contributions in the formula; and, (c) a detailed study of institutional policies concerning publication productivity and its impact on the appointment, tenure and promotion process of academic librarians. ^

An Examination of Lotka’s law in the Field of Library and Information Studies

The purpose of this study was to test Lotka’s law of scientific publication productivity using the methodology outlined by Pao (1985), in the field of Library and Information Studies (LIS). Lotka’s law has been sporadically tested in the field over the past 30+ years, but the results of these studies are inconclusive due to the varying methods employed by the researchers. A data set of 1,856 citations that were found using the ISI Web of Knowledge databases were studied. The values of n and c were calculated to be 2.1 and 0.6418 (64.18%) respectively. The Kolmogorov-Smirnov (K-S) one sample goodness-of-fit test was conducted at the 0.10 level of significance. The Dmax value is 0.022758 and the calculated critical value is 0.026562. It was determined that the null hypothesis stating that there is no difference in the observed distribution of publications and the distribution obtained using Lotka’s and Pao’s procedure could not be rejected. This study finds that literature in the field of library and Information Studies does conform to Lotka’s law with reliable results. As result, Lotka’s law can be used in LIS as a standardized means of measuring author publication productivity which will lead to findings that are comparable on many levels (e.g., department, institution, national). Lotka’s law can be employed as an empirically proven analytical tool to establish publication productivity benchmarks for faculty and faculty librarians. Recommendations for further study include (a) exploring the characteristics of the high and low producers; (b) finding a way to successfully account for collaborative contributions in the formula; and, (c) a detailed study of institutional policies concerning publication productivity and its impact on the appointment, tenure and promotion process of academic librarians.