An integrated multi-agent framework for optimizing time, cost and environmental impact of construction processes

Environmentally conscious construction has received a significant amount of research attention during the last decades. Even though construction literature is rich in studies that emphasize the importance of environmental impact during the construction phase, most of the previous studies failed to combine environmental analysis with other project performance criteria in construction. This is mainly because most of the studies have overlooked the multi-objective nature of construction projects. In order to achieve environmentally conscious construction, multi-objectives and their relationships need to be successfully analyzed in the complex construction environment. The complex construction system is composed of changing project conditions that have an impact on the relationship between time, cost and environmental impact (TCEI) of construction operations. Yet, this impact is still unknown by construction professionals. Studying this impact is vital to fulfill multiple project objectives and achieve environmentally conscious construction. This research proposes an analytical framework to analyze the impact of changing project conditions on the relationship of TCEI. This study includes green house gas (GHG) emissions as an environmental impact category. The methodology utilizes multi-agent systems, multi-objective optimization, analytical network process, and system dynamics tools to study the relationships of TCEI and support decision-making under the influence of project conditions. Life cycle assessment (LCA) is applied to the evaluation of environmental impact in terms of GHG. The mixed method approach allowed for the collection and analysis of qualitative and quantitative data. Structured interviews of professionals in the highway construction field were conducted to gain their perspectives in decision-making under the influence of certain project conditions, while the quantitative data were collected from the Florida Department of Transportation (FDOT) for highway resurfacing projects. The data collected were used to test the framework. The framework yielded statistically significant results in simulating project conditions and optimizing TCEI. The results showed that the change in project conditions had a significant impact on the TCEI optimal solutions. The correlation between TCEI suggested that they affected each other positively, but in different strengths. The findings of the study will assist contractors to visualize the impact of their decision on the relationship of TCEI.

The use of hyphenated spectrometric techniques for the environmental forensic assessment of non-traditional pollutants and degradates in the greater Florida Everglades

A comprehensive investigation of sensitive ecosystems in South Florida with the main goal of determining the identity, spatial distribution, and sources of both organic biocides and trace elements in different environmental compartments is reported. This study presents the development and validation of a fractionation and isolation method of twelve polar acidic herbicides commonly applied in the vicinity of the study areas, including e.g. 2,4-D, MCPA, dichlorprop, mecroprop, picloram in surface water. Solid phase extraction (SPE) was used to isolate the analytes from abiotic matrices containing large amounts of dissolved organic material. Atmospheric-pressure ionization (API) with electrospray ionization in negative mode (ESP-) in a Quadrupole Ion Trap mass spectrometer was used to perform the characterization of the herbicides of interest. ^ The application of Laser Ablation-ICP-MS methodology in the analysis of soils and sediments is reported in this study. The analytical performance of the method was evaluated on certified standards and real soil and sediment samples. Residential soils were analyzed to evaluate feasibility of using the powerful technique as a routine and rapid method to monitor potential contaminated sites. Forty eight sediments were also collected from semi pristine areas in South Florida to conduct screening of baseline levels of bioavailable elements in support of risk evaluation. The LA-ICP-MS data were used to perform a statistical evaluation of the elemental composition as a tool for environmental forensics. ^ A LA-ICP-MS protocol was also developed and optimized for the elemental analysis of a wide range of elements in polymeric filters containing atmospheric dust. A quantitative strategy based on internal and external standards allowed for a rapid determination of airborne trace elements in filters containing both contemporary African dust and local dust emissions. These distributions were used to qualitative and quantitative assess differences of composition and to establish provenance and fluxes to protected regional ecosystems such as coral reefs and national parks. ^

Time, Cost, and Environmental Impact Analysis for Sustainable Design at Multiple Building Levels

Construction projects are complex endeavors that require the involvement of different professional disciplines in order to meet various project objectives that are often conflicting. The level of complexity and the multi-objective nature of construction projects lend themselves to collaborative design and construction such as integrated project delivery (IPD), in which relevant disciplines work together during project conception, design and construction. Traditionally, the main objectives of construction projects have been to build in the least amount of time with the lowest cost possible, thus the inherent and well-established relationship between cost and time has been the focus of many studies. The importance of being able to effectively model relationships among multiple objectives in building construction has been emphasized in a wide range of research. In general, the trade-off relationship between time and cost is well understood and there is ample research on the subject. However, despite sustainable building designs, relationships between time and environmental impact, as well as cost and environmental impact, have not been fully investigated. The objectives of this research were mainly to analyze and identify relationships of time, cost, and environmental impact, in terms of CO2 emissions, at different levels of a building: material level, component level, and building level, at the pre-use phase, including manufacturing and construction, and the relationships of life cycle cost and life cycle CO2 emissions at the usage phase. Additionally, this research aimed to develop a robust simulation-based multi-objective decision-support tool, called SimulEICon, which took construction data uncertainty into account, and was capable of incorporating life cycle assessment information to the decision-making process. The findings of this research supported the trade-off relationship between time and cost at different building levels. Moreover, the time and CO2 emissions relationship presented trade-off behavior at the pre-use phase. The results of the relationship between cost and CO2 emissions were interestingly proportional at the pre-use phase. The same pattern continually presented after the construction to the usage phase. Understanding the relationships between those objectives is a key in successfully planning and designing environmentally sustainable construction projects.

The Use of Hyphenated Spectrometric Techniques for the Environmental Forensic Assessment of Non-Traditional Pollutants and Degradates in the Greater Florida Everglades

A comprehensive investigation of sensitive ecosystems in South Florida with the main goal of determining the identity, spatial distribution, and sources of both organic biocides and trace elements in different environmental compartments is reported. This study presents the development and validation of a fractionation and isolation method of twelve polar acidic herbicides commonly applied in the vicinity of the study areas, including e.g. 2,4-D, MCPA, dichlorprop, mecroprop, picloram in surface water. Solid phase extraction (SPE) was used to isolate the analytes from abiotic matrices containing large amounts of dissolved organic material. Atmospheric-pressure ionization (API) with electrospray ionization in negative mode (ESP-) in a Quadrupole Ion Trap mass spectrometer was used to perform the characterization of the herbicides of interest. The application of Laser Ablation-ICP-MS methodology in the analysis of soils and sediments is reported in this study. The analytical performance of the method was evaluated on certified standards and real soil and sediment samples. Residential soils were analyzed to evaluate feasibility of using the powerful technique as a routine and rapid method to monitor potential contaminated sites. Forty eight sediments were also collected from semi pristine areas in South Florida to conduct screening of baseline levels of bioavailable elements in support of risk evaluation. The LA-ICP-MS data were used to perform a statistical evaluation of the elemental composition as a tool for environmental forensics. A LA-ICP-MS protocol was also developed and optimized for the elemental analysis of a wide range of elements in polymeric filters containing atmospheric dust. A quantitative strategy based on internal and external standards allowed for a rapid determination of airborne trace elements in filters containing both contemporary African dust and local dust emissions. These distributions were used to qualitative and quantitative assess differences of composition and to establish provenance and fluxes to protected regional ecosystems such as coral reefs and national parks.

Water resources assessment and geographic information system (GIS)-based stormwater runoff estimates for artificial recharge of freshwater aquifers in New Providence, Bahamas

The Bahamas is a small island nation that is dealing with the problem of freshwater shortage. All of the country’s freshwater is contained in shallow lens aquifers that are recharged solely by rainfall. The country has been struggling to meet the water demands by employing a combination of over-pumping of aquifers, transport of water by barge between islands, and desalination of sea water. In recent decades, new development on New Providence, where the capital city of Nassau is located, has created a large area of impervious surfaces and thereby a substantial amount of runoff with the result that several of the aquifers are not being recharged. A geodatabase was assembled to assess and estimate the quantity of runoff from these impervious surfaces and potential recharge locations were identified using a combination of Geographic Information Systems (GIS) and remote sensing. This study showed that runoff from impervious surfaces in New Providence represents a large freshwater resource that could potentially be used to recharge the lens aquifers on New Providence.

Analysis of global compliance and implementation of the goals of international environmental treaties: A case study of the Convention on Biodiversity (CBD)

The Convention on Biodiversity (CBD) was created in 1992 to coordinate global governments to protect biological resources. The CBD has three goals: protection of biodiversity, achievement of sustainable use of biodiversity and facilitation of equitable sharing of the benefits of biological resources. The goal of protecting biological resources has remained both controversial and difficult to implement. This study focused more on the goal of biodiversity protection. The research was designed to examine how globally constructed environmental policies get adapted by national governments and then passed down to local levels where actual implementation takes place. Effectiveness of such policies depends on the extent of actual implementation at local levels. Therefore, compliance was divided and examined at three levels: global, national and local. The study then developed various criteria to measure compliance at these levels. Both qualitative and quantitative methods were used to analyze compliance and implementation. The study was guided by three questions broadly examining critical factors that most influence the implementation of biodiversity protection policies at the global, national and local levels. Findings show that despite an overall biodiversity deficit of 0.9 hectares per person, global compliance with the CBD goals is currently at 35%. Compliance is lowest at local levels at 14%, it is slightly better at national level at 50%, and much better at the international level 64%. Compliance appears higher at both national and international levels because compliance here is paper work based and policy formulation. If implementation at local levels continues to produce this low compliance, overall conservation outcomes can only get worse than what it is at present. There are numerous weaknesses and capacity challenges countries are yet to address in their plans. In order to increase local level compliance, the study recommends a set of robust policies that build local capacity, incentivize local resource owners, and implement biodiversity protection programs that are akin to local needs and aspirations.^

English Language Learners: A Correlational Study of the Relationship Between A Proficiency Level Assessment and End of Course Test Scores at one Georgia High School

Understanding the language of one’s cultural environment is important for effective communication and function. As such, students entering U.S. schools from foreign countries are given access to English to Speakers of Other Languages (ESOL) programs and they are referred to as English Language Learner (ELL) students. This dissertation examined the correlation of ELL ACCESS Composite Performance Level (CPL) score to the End of Course tests (EOCTs) and the Georgia High School Graduation Tests (GHSGTs) in the four content courses (language arts, mathematics, science, and social studies). A premise of this study was that English language proficiency is critical in meeting or exceeding state and county assessment standards. A quantitative descriptive research design was conducted using Cross-sectional archival data from a secondary source. There were 148 participants from school years 2011-2012 to 2013- 2014 from Grades 9-12. A Pearson product moment correlation was run to assess the relationship between the ACCESS CPL (independent variable) and the EOCT scores and the GHSGT scores (dependent variables). The findings showed that there was a positive correlation between ACCESS CPL scores and the EOCT scores where language arts showed a strong positive correlation and mathematics showed a positive weak correlation. Also, there was a positive correlation between ACCESS CPL scores and GHSGT scores where language arts showed a weak positive correlation. The results of this study indicated that that there is a relationship between the stated variables, ACCESS CPL, EOCT and GHSGT. Also, the results of this study showed that there were positive correlations at varying degrees for each grade levels. While the null hypothesis for Research Question 1 and Research Question 2 were rejected, there was a slight relationship between the variables.

An interactive environmental site assessment audit for Wagner Creek river basin clean up project

The primary purpose of this thesis was to design and create an Interactive Audit to conduct Environmental Site Assessments according to American Society of Testing Material's (ASTM) Phase I Standards at the Wagner Creek study area. ArcPad and ArcIMS are the major software that were used to create the model and ArcGIS Desktop was used for data analysis and to export shapefile symbology to ArcPad. Geographic Information Systems (GIS) is an effective tool to deploy these purposes. This technology was utilized to carry out data collection, data analysis and to display data interactively on the Internet. Electronic forms, customized for mobile devices were used to survey sites. This is an easy and fast way to collect and modify field data. New data such as land use, recognized environmental conditions, and underground storage tanks can be added into existing datasets. An updated map is then generated and uploaded to the Internet using ArcIMS technology. The field investigator has the option to generate and view the Inspection Form at the end of his survey on site, or print a hardcopy at base. The mobile device also automatically generates preliminary editable Executive Reports for any inspected site.

Analysis of Global Compliance and Implementation of the Goals of International Environmental Treaties: A Case study of the Convention on Biodiversity (CBD)

The Convention on Biodiversity (CBD) was created in 1992 to coordinate global governments to protect biological resources. The CBD has three goals: protection of biodiversity, achievement of sustainable use of biodiversity and facilitation of equitable sharing of the benefits of biological resources. The goal of protecting biological resources has remained both controversial and difficult to implement. This study focused more on the goal of biodiversity protection. The research was designed to examine how globally constructed environmental policies get adapted by national governments and then passed down to local levels where actual implementation takes place. Effectiveness of such policies depends on the extent of actual implementation at local levels. Therefore, compliance was divided and examined at three levels: global, national and local. The study then developed various criteria to measure compliance at these levels. Both qualitative and quantitative methods were used to analyze compliance and implementation. The study was guided by three questions broadly examining critical factors that most influence the implementation of biodiversity protection policies at the global, national and local levels. Findings show that despite an overall biodiversity deficit of 0.9 hectares per person, global compliance with the CBD goals is currently at 35%. Compliance is lowest at local levels at 14%, it is slightly better at national level at 50%, and much better at the international level 64%. Compliance appears higher at both national and international levels because compliance here is paper work based and policy formulation. If implementation at local levels continues to produce this low compliance, overall conservation outcomes can only get worse than what it is at present. There are numerous weaknesses and capacity challenges countries are yet to address in their plans. In order to increase local level compliance, the study recommends a set of robust policies that build local capacity, incentivize local resource owners, and implement biodiversity protection programs that are akin to local needs and aspirations.

The *validation of an instrument for the assessment of study behaviors of high school students

The purpose of this study is to validate the Study Behavior Inventory-High School, an instrument designed to measure study behaviors of high school students and to determine the stability of its scores across populations and across grades. Numerous studies have shown the relationship between the level of students' use of appropriate study behaviors and their levels of academic achievement and this is particularly relevant at a time of increasing demands for school and teacher accountability for their students' academic achievement. ^ The instrument was administered to 3,336 students in grades 9 through 12 in four high schools in diverse parts of the United States. Factor analysis yielded a four factor structure for the instrument and evidence for its construct validity was obtained using convergent and discriminant methods. The four factors include academic self-perception and feelings of low self-efficacy, academic preparation behaviors, time management, and the social nature of taking tests and studying. Internal consistency reliability for the scores on each of the four factors was calculated and found to range between .68 and .87. Finally, confirmatory factor analysis indicated acceptable levels of fit between the factor structure obtained in this study and an earlier one obtained during a pilot study using 800 participants. ^ The SBI-HS appears to be a valid and reliable instrument for the measure of study behaviors in high school students. ^

Application and evaluation of an Institute of Medicine approach to dietary assessment and planning in long -term care

The primary purpose of these studies was to determine the effect of planning menus using the Institute of Medicine's (IOMs) Simple Nutrient Density Approach on nutrient intakes of long-term care (LTC) residents. In the first study, nutrient intakes of 72 subjects were assessed using Dietary Reference Intakes (DRIs) and IOM methodology. The intake distributions were used to set intake and menu planning goals. In the second study, the facility's regular menus were modified to meet the intake goals for vitamin E, magnesium, zinc, vitamin D and calcium. An experiment was used to test whether the modified menu resulted in intakes of micronutrients sufficient to achieve a low prevalence (<3%) of nutrient inadequacies. Three-day weighed food intakes for 35 females were adjusted for day-to-day variations in order to obtain an estimate of long-term average intake and to estimate the proportion of residents with inadequate nutrient intakes. ^ In the first study, the prevalence of inadequate intakes was determined to be between 65-99% for magnesium, vitamin E, and zinc. Mean usual intakes of Vitamin D and calcium were far below the Adequate Intakes (AIs). In the experimental study, the prevalence of inadequacies was reduced to <3% for zinc and vitamin E but not magnesium. The groups' mean usual intake from the modified menu met or exceeded the AI for calcium but fell short for vitamin D. Alternatively, it was determined that addition of a multivitamin and mineral (MVM) supplement to intakes of the regular menu could be used to achieve goals for vitamin E, zinc and vitamin D but not calcium and magnesium. ^ A combination of menu modification and MVM supplementation may be necessary to achieve a low prevalence of micronutrient inadequacies among LTC residents. Menus should be planned to optimize intakes of those nutrients that are low in an MVM, such as calcium, magnesium, and potassium. A MVM supplement should be provided to fill the gap for nutrients not provided in sufficient amounts by the diet, such as vitamin E and vitamin D. ^