The impact of bandwidth in structured interviewing and criterion stability in predicting and assessing manager performance across transition and maintenance stages

The current study examined the role of three important components in the use of structured employment interviewing in performance prediction: construct bandwidth, observed communication skill, and the stability/dynamicity of performance criteria over time. A matched sample of 242 hospitality managers was derived from a field data set provided by a large hospitality management organization. Interview data and two years of performance appraisal data were provided. Bandwidth analysis demonstrated only minimal differences in prediction between matched predictor-criterion pairs compared with predictor to overall aggregate ratings (unmatched). The communication skill analysis revealed that this interviewer rated observation significantly predicted a number of the individual performance dimensions as well as overall performance over time. Of the five interview items, the strongest overall predictor of performance was interviewer rated communication skill. The stability/dynamicity analyses demonstrated the performance criteria to be generally stable over the two year period examined, which provides support for the long held notion that performance criteria is stabile over time. However, there were two exceptions. The interview dimension customer service orientation had shifting relationships over time with four of the criteria over the two year period. The performance criteria employee development also demonstrated some instability in its relationships with predictors. Thus, some evidence of dynamicity in performance criteria was revealed. Interestingly, both of the most noteworthy findings in the study involved items that were rated differently than the others in the study. The rated interview item communication skill and the rated performance criteria client satisfaction were ratings that involved a more direct level of observation. Additional analyses also revealed evidence of a general factor of performance. These two themes are more fully covered in the discussion.

Blood-brain barrier in vitro model: A tissue engineering approach and validation

This dissertation evaluated the feasibility of using commercially available immortalized cell lines in building a tissue engineered in vitro blood-brain barrier (BBB) co-culture model for preliminary drug development studies. Mouse endothelial cell line and rat astrocyte cell lines purchased from American Type Culture Collections (ATCC) were the building blocks of the co-culture model. An astrocyte derived acellular extracellular matrix (aECM) was introduced in the co-culture model to provide a novel in vitro biomimetic basement membrane for the endothelial cells to form endothelial tight junctions. Trans-endothelial electrical resistance (TEER) and solute mass transport studies were engaged to quantitatively evaluate the tight junction formation on the in-vitro BBB models. Immuno-fluorescence microscopy and Western Blot analysis were used to qualitatively verify the in vitro expression of occludin, one of the earliest discovered tight junction proteins. Experimental data from a total of 12 experiments conclusively showed that the novel BBB in vitro co-culture model with the astrocyte derived aECM (CO+aECM) was promising in terms of establishing tight junction formation represented by TEER values, transport profiles and tight junction protein expression when compared with traditional co-culture (CO) model setups and endothelial cells cultured alone. Experimental data were also found to be comparable with several existing in vitro BBB models built from various methods. In vitro colorimetric sulforhodamine B (SRB) assay revealed that the co-cultured samples with aECM resulted in less cell loss on the basal sides of the insert membranes than that from traditional co-culture samples. The novel tissue engineering approach using immortalized cell lines with the addition of aECM was proven to be a relevant alternative to the traditional BBB in vitro modeling.

Quantifying the Impacts of the Recent Economic Crisis on Regional Tourism Industry and Economy

The purpose of this study is to explore the accuracy issue of the Input-Output model in quantifying the impacts of the 2007 economic crisis on a local tourism industry and economy. Though the model has been used in the tourism impact analysis, its estimation accuracy is rarely verified empirically. The Metro Orlando area in Florida is investigated as an empirical study, and the negative change in visitor expenditure between 2007 and 2008 is taken as the direct shock. The total impacts are assessed in terms of output and employment, and are compared with the actual data. This study finds that there are surprisingly large discrepancies among the estimated and actual results, and the Input-Output model appears to overestimate the negative impacts. By investigating the local economic activities during the study period, this study made some exploratory efforts in explaining such discrepancies. Theoretical and practical implications are then suggested.

The Industry and Recent Graduates: A Relationship in Transition

The industry is attempting to become more involved with graduates and currently-enrolled students in hospitality education programs. This article re- views the current situation, describes problems which exist, and proposes potential strategies to help resolve the problems.

Past, Present, and Future: The Food Service Industry and Its Changes

In the article - Past, Present, and Future: The Food Service Industry and Its Changes - by Brother Herman E. Zaccarelli, International Director, Restaurant, Hotel and Institutional Management Institute at Purdue University, Brother Zaccarelli initially states: “Educators play an important role in the evolution of the food service industry. The author discusses that evolution and suggests how educators can be change agents along with management in that evolutionary progression.” The author goes on to wax philosophically, as well as speak generically about the food service industry; to why it offers fascinating and rewarding careers. Additionally, he writes about the influence educators have on students in this regard. “Educators can speak about how the food service industry has benefited them both personally and professionally,” says Brother Zaccarelli. “We get excited about alerting students to the many opportunities and, in fact, serve as “salespersons” for the industry to whoever (school administrators, legislators, and peers in the educational institution) will listen.” Brother Zaccarelli also speaks to growth and changes in food service, and even more importantly about the people and faces behind everything that food service, and hospitality in general comprise. The author will have you know, that people are what drive an educator. “What makes the food service industry so great? At the heart of this question's answer is people: the people whom it serves in institutional and commercial operations of all types; the people who work within it; the people who provide the goods, services, and equipment to it; the people who study it,” says Brother Zaccarelli. “All of these groups have, of course, a vested personal and/or professional interest in seeing our industry improve.” Another concept the author would like you to absorb, and it’s even more so true today than yesterday, is the prevalence of convergence and divergence within food service. For food service and beyond, it is the common denominators and differences that make the hospitality-food service industry so dynamic and vibrant. These are the winds of change presented to an educator who wants to have a positive impact on students. The author warns that the many elements involved in the food service industry conspire to erode quality of service in an industry that is also persistently expanding, and whose cornerstone principles are underpinned by service itself. “The three concerns addressed - quality, employees, and marketing - are intimately related,” Brother Zaccarelli says in stripping-down the industry to bare essentials. He defines and addresses the issues related to each with an eye toward how education can reconcile said issues.

Quantifying the Impacts of the Recent Economic Crisis on a Regional Tourism Industry and Economy

The purpose of this study is to explore the accuracy issue of the Input-Output model in quantifying the impacts of the 2007 economic crisis on a local tourism industry and economy. Though the model has been used in the tourism impact analysis, its estimation accuracy is rarely verified empirically. The Metro Orlando area in Florida is investigated as an empirical study, and the negative change in visitor expenditure between 2007 and 2008 is taken as the direct shock. The total impacts are assessed in terms of output and employment, and are compared with the actual data. This study finds that there are surprisingly large discrepancies among the estimated and actual results, and the Input-Output model appears to overestimate the negative impacts. By investigating the local economic activities during the study period, this study made some exploratory efforts in explaining such discrepancies. Theoretical and practical implications are then suggested.

Aspects of the transplantation, storage and maintenance of corals (Montastraea Faveolata, Acropora Cervicornis and A. Palmata)

The purpose of this study is to explore aspects of coral transplantation for restoration. Montastraea faveolata cores of 2.54 and 5.0 cm were stored in aquaria, on an array and on the substrate. Survival on the array and substrate were 100% for 12 and 11 months respectively. Branches of Acropora cervicornis had 75.0 % survival on the substrate and 91.7% on the array. Disease caused mortality for the A. cervicornis and the 2.54 cm cores in the aquaria but not for the 5.0 cm cores. Growth was significantly higher for A. cervicornis and A. palmata branches stored on an array than in an open seawater system. The storage type affected growth patterns of both species. M. faveolata fed three times/week increased in surface area significantly more than those fed once and twice/week. Corals fed once per week significantly increased their polyp density. Corals had intermittent respiration while under sub-aerial conditions.

Systems Engineering Perspective of the Cruise Industry

The maturation of the cruise industry has led to increased competition which demands more efficient operations. Systems engineering, a discipline that studies complex organizations of material, people, and information, is traditionally only applied in the manufacturing sector; however, it can make significant contributions to service industries such as the cruise industry. The author describes this type of engineering, explores how it can be applied to the cruise industry, and presents two case studies demonstrating applications to the cruise industry luggage delivery process and the information technology help desk process. The results show that this approach can make the processes more productive and enhance profitability for the cruise lines.

A reliability centered maintenance decision system for a discrete part manufacturing facility

This thesis develops and validates the framework of a specialized maintenance decision support system for a discrete part manufacturing facility. Its construction utilizes a modular approach based on the fundamental philosophy of Reliability Centered Maintenance (RCM). The proposed architecture uniquely integrates System Decomposition, System Evaluation, Failure Analysis, Logic Tree Analysis, and Maintenance Planning modules. It presents an ideal solution to the unique maintenance inadequacies of modern discrete part manufacturing systems. Well established techniques are incorporated as building blocks of the system's modules. These include Failure Mode Effect and Criticality Analysis (FMECA), Logic Tree Analysis (LTA), Theory of Constraints (TOC), and an Expert System (ES). A Maintenance Information System (MIS) performs the system's support functions. Validation was performed by field testing of the system at a Miami based manufacturing facility. Such a maintenance support system potentially reduces downtime losses and contributes to higher product quality output. Ultimately improved profitability is the final outcome. ^

Estimation of average annual daily traffic (AADT) using geographically weighted regression (GWR) method and geographic information system (GIS)

Annual average daily traffic (AADT) is important information for many transportation planning, design, operation, and maintenance activities, as well as for the allocation of highway funds. Many studies have attempted AADT estimation using factor approach, regression analysis, time series, and artificial neural networks. However, these methods are unable to account for spatially variable influence of independent variables on the dependent variable even though it is well known that to many transportation problems, including AADT estimation, spatial context is important. ^ In this study, applications of geographically weighted regression (GWR) methods to estimating AADT were investigated. The GWR based methods considered the influence of correlations among the variables over space and the spatially non-stationarity of the variables. A GWR model allows different relationships between the dependent and independent variables to exist at different points in space. In other words, model parameters vary from location to location and the locally linear regression parameters at a point are affected more by observations near that point than observations further away. ^ The study area was Broward County, Florida. Broward County lies on the Atlantic coast between Palm Beach and Miami-Dade counties. In this study, a total of 67 variables were considered as potential AADT predictors, and six variables (lanes, speed, regional accessibility, direct access, density of roadway length, and density of seasonal household) were selected to develop the models. ^ To investigate the predictive powers of various AADT predictors over the space, the statistics including local r-square, local parameter estimates, and local errors were examined and mapped. The local variations in relationships among parameters were investigated, measured, and mapped to assess the usefulness of GWR methods. ^ The results indicated that the GWR models were able to better explain the variation in the data and to predict AADT with smaller errors than the ordinary linear regression models for the same dataset. Additionally, GWR was able to model the spatial non-stationarity in the data, i.e., the spatially varying relationship between AADT and predictors, which cannot be modeled in ordinary linear regression. ^

Capacity-based cost modeling for light rail and bus rapid transit systems

Choosing between Light Rail Transit (LRT) and Bus Rapid Transit (BRT) systems is often controversial and not an easy task for transportation planners who are contemplating the upgrade of their public transportation services. These two transit systems provide comparable services for medium-sized cities from the suburban neighborhood to the Central Business District (CBD) and utilize similar right-of-way (ROW) categories. The research is aimed at developing a method to assist transportation planners and decision makers in determining the most feasible system between LRT and BRT. ^ Cost estimation is a major factor when evaluating a transit system. Typically, LRT is more expensive to build and implement than BRT, but has significantly lower Operating and Maintenance (OM) costs than BRT. This dissertation examines the factors impacting capacity and costs, and develops cost models, which are a capacity-based cost estimate for the LRT and BRT systems. Various ROW categories and alignment configurations of the systems are also considered in the developed cost models. Kikuchi's fleet size model (1985) and cost allocation method are used to develop the cost models to estimate the capacity and costs. ^ The comparison between LRT and BRT are complicated due to many possible transportation planning and operation scenarios. In the end, a user-friendly computer interface integrated with the established capacity-based cost models, the LRT and BRT Cost Estimator (LBCostor), was developed by using Microsoft Visual Basic language to facilitate the process and will guide the users throughout the comparison operations. The cost models and the LBCostor can be used to analyze transit volumes, alignments, ROW configurations, number of stops and stations, headway, size of vehicle, and traffic signal timing at the intersections. The planners can make the necessary changes and adjustments depending on their operating practices. ^

Directionality based preventive link maintenance scheme for mobile ad hoc networks

The purpose of this study was to design a preventive scheme using directional antennas to improve the performance of mobile ad hoc networks. In this dissertation, a novel Directionality based Preventive Link Maintenance (DPLM) Scheme is proposed to characterize the performance gain [JaY06a, JaY06b, JCY06] by extending the life of link. In order to maintain the link and take preventive action, signal strength of data packets is measured. Moreover, location information or angle of arrival information is collected during communication and saved in the table. When measured signal strength is below orientation threshold , an orientation warning is generated towards the previous hop node. Once orientation warning is received by previous hop (adjacent) node, it verifies the correctness of orientation warning with few hello pings and initiates high quality directional link (a link above the threshold) and immediately switches to it, avoiding a link break altogether. The location information is utilized to create a directional link by orienting neighboring nodes antennas towards each other. We call this operation an orientation handoff, which is similar to soft-handoff in cellular networks. ^ Signal strength is the indicating factor, which represents the health of the link and helps to predict the link failure. In other words, link breakage happens due to node movement and subsequently reducing signal strength of receiving packets. DPLM scheme helps ad hoc networks to avoid or postpone costly operation of route rediscovery in on-demand routing protocols by taking above-mentioned preventive action. ^ This dissertation advocates close but simple collaboration between the routing, medium access control and physical layers. In order to extend the link, the Dynamic Source Routing (DSR) and IEEE 802.11 MAC protocols were modified to use the ability of directional antennas to transmit over longer distance. A directional antenna module is implemented in OPNET simulator with two separate modes of operations: omnidirectional and directional. The antenna module has been incorporated in wireless node model and simulations are performed to characterize the performance improvement of mobile ad hoc networks. Extensive simulations have shown that without affecting the behavior of the routing protocol noticeably, aggregate throughput, packet delivery ratio, end-to-end delay (latency), routing overhead, number of data packets dropped, and number of path breaks are improved considerably. We have done the analysis of the results in different scenarios to evaluate that the use of directional antennas with proposed DPLM scheme has been found promising to improve the performance of mobile ad hoc networks. ^

Step and flash imprint lithography: Fabrication of patterned media for extremely high density magnetic data storage devices

Currently the data storage industry is facing huge challenges with respect to the conventional method of recording data known as longitudinal magnetic recording. This technology is fast approaching a fundamental physical limit, known as the superparamagnetic limit. A unique way of deferring the superparamagnetic limit incorporates the patterning of magnetic media. This method exploits the use of lithography tools to predetermine the areal density. Various nanofabrication schemes are employed to pattern the magnetic material are Focus Ion Beam (FIB), E-beam Lithography (EBL), UV-Optical Lithography (UVL), Self-assembled Media Synthesis and Nanoimprint Lithography (NIL). Although there are many challenges to manufacturing patterned media, the large potential gains offered in terms of areal density make it one of the most promising new technologies on the horizon for future hard disk drives. Thus, this dissertation contributes to the development of future alternative data storage devices and deferring the superparamagnetic limit by designing and characterizing patterned magnetic media using a novel nanoimprint replication process called "Step and Flash Imprint lithography". As opposed to hot embossing and other high temperature-low pressure processes, SFIL can be performed at low pressure and room temperature. Initial experiments carried out, consisted of process flow design for the patterned structures on sputtered Ni-Fe thin films. The main one being the defectivity analysis for the SFIL process conducted by fabricating and testing devices of varying feature sizes (50 nm to 1 μm) and inspecting them optically as well as testing them electrically. Once the SFIL process was optimized, a number of Ni-Fe coated wafers were imprinted with a template having the patterned topography. A minimum feature size of 40 nm was obtained with varying pitch (1:1, 1:1.5, 1:2, and 1:3). The Characterization steps involved extensive SEM study at each processing step as well as Atomic Force Microscopy (AFM) and Magnetic Force Microscopy (MFM) analysis.

Secondary stakeholders as agents of influence: Three essays on political risk, reputation, and multinational performance

Organizational researchers have recently taken an interest in the ways in which social movements, non-governmental organizations (NGOs), and other secondary stakeholders attempt to influence corporate behavior. Scholars, however, have yet to carefully probe the link between secondary stakeholder legal action and target firm stock market performance. This is puzzling given the sharp rise in NGO-initiated civil lawsuits against corporations in recent years for alleged overseas human rights abuses and environmental misconduct. Furthermore, few studies have considered how such lawsuits impact a target firm’s intangible assets, namely its image and reputation. Structured in the form of three essays, this dissertation examined the antecedents and consequences of secondary stakeholder legal activism in both conceptual and empirical settings. ^ Essay One argued that conventional approaches to understanding political risk fail to account for the reputational risks to multinational enterprises (MNEs) posed by transnational networks of human rights NGOs employing litigation-based strategies. It offered a new framework for understanding this emerging challenge to multinational corporate activity. Essay Two empirically tested the relationship between the filing of human rights-related civil lawsuits and corporate stock market performance using an event study methodology and regression analysis. The statistical analysis performed showed that target firms experience a significant decline in share price upon filing and that both industry and nature of the lawsuit are significantly and negatively related to shareholder wealth. Essay Three drew upon social movement and social identity theories to develop and test a set of hypotheses on how secondary stakeholder groups select their targets for human rights-related civil lawsuits. The results of a logistic regression model offered support for the proposition that MNE targets are chosen based on both interest and identity factors. The results of these essays suggest that legal action initiated by secondary stakeholder groups is a new and salient threat to multinational business and that firms doing business in countries with weak political institutions should factor this into corporate planning and take steps to mitigate their exposure to such risks.^

Leakage temperature dependency aware real-time scheduling for power and thermal optimization

Catering to society's demand for high performance computing, billions of transistors are now integrated on IC chips to deliver unprecedented performances. With increasing transistor density, the power consumption/density is growing exponentially. The increasing power consumption directly translates to the high chip temperature, which not only raises the packaging/cooling costs, but also degrades the performance/reliability and life span of the computing systems. Moreover, high chip temperature also greatly increases the leakage power consumption, which is becoming more and more significant with the continuous scaling of the transistor size. As the semiconductor industry continues to evolve, power and thermal challenges have become the most critical challenges in the design of new generations of computing systems. ^ In this dissertation, we addressed the power/thermal issues from the system-level perspective. Specifically, we sought to employ real-time scheduling methods to optimize the power/thermal efficiency of the real-time computing systems, with leakage/ temperature dependency taken into consideration. In our research, we first explored the fundamental principles on how to employ dynamic voltage scaling (DVS) techniques to reduce the peak operating temperature when running a real-time application on a single core platform. We further proposed a novel real-time scheduling method, “M-Oscillations” to reduce the peak temperature when scheduling a hard real-time periodic task set. We also developed three checking methods to guarantee the feasibility of a periodic real-time schedule under peak temperature constraint. We further extended our research from single core platform to multi-core platform. We investigated the energy estimation problem on the multi-core platforms and developed a light weight and accurate method to calculate the energy consumption for a given voltage schedule on a multi-core platform. Finally, we concluded the dissertation with elaborated discussions of future extensions of our research. ^