Development of hardware in the loop real-time control techniques for hybrid power systems involving distributed demands and sustainable energy sources

The future power grid will effectively utilize renewable energy resources and distributed generation to respond to energy demand while incorporating information technology and communication infrastructure for their optimum operation. This dissertation contributes to the development of real-time techniques, for wide-area monitoring and secure real-time control and operation of hybrid power systems. ^ To handle the increased level of real-time data exchange, this dissertation develops a supervisory control and data acquisition (SCADA) system that is equipped with a state estimation scheme from the real-time data. This system is verified on a specially developed laboratory-based test bed facility, as a hardware and software platform, to emulate the actual scenarios of a real hybrid power system with the highest level of similarities and capabilities to practical utility systems. It includes phasor measurements at hundreds of measurement points on the system. These measurements were obtained from especially developed laboratory based Phasor Measurement Unit (PMU) that is utilized in addition to existing commercially based PMU’s. The developed PMU was used in conjunction with the interconnected system along with the commercial PMU’s. The tested studies included a new technique for detecting the partially islanded micro grids in addition to several real-time techniques for synchronization and parameter identifications of hybrid systems. ^ Moreover, due to numerous integration of renewable energy resources through DC microgrids, this dissertation performs several practical cases for improvement of interoperability of such systems. Moreover, increased number of small and dispersed generating stations and their need to connect fast and properly into the AC grids, urged this work to explore the challenges that arise in synchronization of generators to the grid and through introduction of a Dynamic Brake system to improve the process of connecting distributed generators to the power grid.^ Real time operation and control requires data communication security. A research effort in this dissertation was developed based on Trusted Sensing Base (TSB) process for data communication security. The innovative TSB approach improves the security aspect of the power grid as a cyber-physical system. It is based on available GPS synchronization technology and provides protection against confidentiality attacks in critical power system infrastructures. ^

Parameter optimization for noise and vibration reduction associated with position and speed sensorless control of permanent magnet machines at low speed

With the advantages and popularity of Permanent Magnet (PM) motors due to their high power density, there is an increasing incentive to use them in variety of applications including electric actuation. These applications have strict noise emission standards. The generation of audible noise and associated vibration modes are characteristics of all electric motors, it is especially problematic in low speed sensorless control rotary actuation applications using high frequency voltage injection technique. This dissertation is aimed at solving the problem of optimizing the sensorless control algorithm for low noise and vibration while achieving at least 12 bit absolute accuracy for speed and position control. The low speed sensorless algorithm is simulated using an improved Phase Variable Model, developed and implemented in a hardware-in-the-loop prototyping environment. Two experimental testbeds were developed and built to test and verify the algorithm in real time.^ A neural network based modeling approach was used to predict the audible noise due to the high frequency injected carrier signal. This model was created based on noise measurements in an especially built chamber. The developed noise model is then integrated into the high frequency based sensorless control scheme so that appropriate tradeoffs and mitigation techniques can be devised. This will improve the position estimation and control performance while keeping the noise below a certain level. Genetic algorithms were used for including the noise optimization parameters into the developed control algorithm.^ A novel wavelet based filtering approach was proposed in this dissertation for the sensorless control algorithm at low speed. This novel filter was capable of extracting the position information at low values of injection voltage where conventional filters fail. This filtering approach can be used in practice to reduce the injected voltage in sensorless control algorithm resulting in significant reduction of noise and vibration.^ Online optimization of sensorless position estimation algorithm was performed to reduce vibration and to improve the position estimation performance. The results obtained are important and represent original contributions that can be helpful in choosing optimal parameters for sensorless control algorithm in many practical applications.^

Labor turnover : its causes, consequences, and control strategy in five selected restaurants in the Miami area

The purpose of this study is to identify and analyze the basic causes of food service employee turnover in five selected restaurants in the Miami area. The withdrawal behavior in this study is treated in terms of controllable turnover, for the purpose of management, learning more about what action to take to solve this problem which has eaten into the fabric of the hospitality industry. The aim is to find out from the food service employees and management view of work for the purpose of identifying the variables which cause an employee to voluntarily leave a job. The objective is therefore, to analyze and describe the problem of labor turnover in these selected restaurants. Such description must precede efforts to arrive at solutions to the problem if these efforts are ever to be more than haphazard and superficial. Sigmund Freud once stated: "The true beginning of scientific activity consists in describing phenomena and only then in proceeding to group, classify and correlate them."1 The nature of the study is basically descriptive survey. Data is collected by the use of management questionnaire, food service employee questionnaire and finally employees job description index. The survey consisted of a series of well defined questions with open and closed endings dealing with employee with employee turnover. As Robert Ferber and P. J. Verdoom state in their book titled Research Method in Economics of Business: "Structured questionnaires, by supplying question formulations in very specific terms as well as the different possible answers are easier for the sample members to answer and also serve to reduce the danger of interviewer bias."2 The answers to the prepared questionnaire by sample members were then recorded. The results of the questionnaire responses were then compiled for presentation and analysis. 1 Julian Simon, Basic Research Methods in Social Science. Random House, New York, 1969, p.53. 2 Robert J. Ferber and P.J. Verdoon, Research Methods in Economics and Business, The McMillan Company, 1962, p. 20 9 .