Biocompatibility assessment of biosorbable polymer coated nitinol alloys

Owing to an increased risk of aging population and a higher incidence of coronary artery disease (CAD), there is a need for more reliable and safer treatments. Numerous varieties of durable polymer-coated drug eluting stents (DES) are available in the market in order to mitigate in-stent restenosis. However, there are certain issues regarding their usage such as delayed arterial healing, thrombosis, inflammation, toxic corrosion by-products, mechanical stability and degradation. As a result, significant amount of research has to be devoted to the improvement of biodegradable polymer-coated implant materials in an effort to enhance their bioactive response. ^ In this investigation, magneto-electropolished (MEP) and a novel biodegradable polymer coated ternary Nitinol alloys, NiTiTa and NiTiCr were prepared to study their bio and hemocompatibility properties. The initial interaction of a biomaterial with its surroundings is dependent on its surface characteristics such as, composition, corrosion resistance, work of adhesion and morphology. In-vitro corrosion tests such as potentiodynamic polarization and electrochemical impedance spectroscopic (EIS) studies were conducted to determine the coating stability and longevity. In-vitro hemocompatibility studies and HUVEC cell growth was performed to determine their thrombogenic and biocompatibility properties. Critical delamination load of the polymer coated Nitinol alloys was determined using Nano-scratch analysis. Sulforhodamine B (SRB) assays were performed to elucidate the effect of metal ions leached from Nitinol alloys on the viability of HUVEC cells. Scanning Electron Microscopy (SEM), X-ray Photoelectron Spectroscopy (XPS), contact angle meter and X-ray diffraction (XRD) were used to characterize the surface of the alloys. ^ MEP treated and polymer coated (PC) Nitinol alloys displayed a corrosion resistant polymer coating as compared to uncoated alloys. MEP and PC has resulted in reduced Ni and Cr ion leaching from NiTi5Cr and subsequently low cytotoxicity. Thrombogenicity tests revealed significantly less platelet adhesion and confluent endothelial cell growth on polymer coated and uncoated ternary MEP Nitinol alloys. Finally, this research addresses the bio and hemocompatibility of MEP + PC ternary Nitinol alloys that could be used to manufacture blood contacting devices such as stents and vascular implants which can lead to lower U.S. healthcare spending.^

Petrology and geochemistry of some high pressure rocks from northern part of Rio San Juan complex, Dominican Republic

The Rio San Juan Complex is an important occurrence of high pressure/low temperature rocks in the circum-Caribbean region which contains both coherent blueschist units and two varieties of melange in the same area. The melanges contain a diverse assemblage of blocks of various sizes, different degrees of metamorphism, and mineral assemblages. Some high pressure blocks show two stages of metamorphism. The earliest stage is characterized by high pressure-low temperature conditions and the second stage is characterized by high pressure-lower temperature conditions. The geochemistry of thirteen samples from the Rio San Juan Complex has been studied and data have been compared with rocks of adjacent regions. Geochemical evidence indicates that rocks from the Rio San Juan Complex have predominant calc-alkaline affinities with subordinate tholeiitic affinities. This suggests that they have a multiple tectonic provenance.

Biocompatibility Assessment of Biosorbable Polymer Coated Nitinol Alloys

Owing to an increased risk of aging population and a higher incidence of coronary artery disease (CAD), there is a need for more reliable and safer treatments. Numerous varieties of durable polymer-coated drug eluting stents (DES) are available in the market in order to mitigate in-stent restenosis. However, there are certain issues regarding their usage such as delayed arterial healing, thrombosis, inflammation, toxic corrosion by-products, mechanical stability and degradation. As a result, significant amount of research has to be devoted to the improvement of biodegradable polymer-coated implant materials in an effort to enhance their bioactive response. In this investigation, magneto-electropolished (MEP) and a novel biodegradable polymer coated ternary Nitinol alloys, NiTiTa and NiTiCr were prepared to study their bio and hemocompatibility properties. The initial interaction of a biomaterial with its surroundings is dependent on its surface characteristics such as, composition, corrosion resistance, work of adhesion and morphology. In-vitro corrosion tests such as potentiodynamic polarization and electrochemical impedance spectroscopic (EIS) studies were conducted to determine the coating stability and longevity. In-vitro hemocompatibility studies and HUVEC cell growth was performed to determine their thrombogenic and biocompatibility properties. Critical delamination load of the polymer coated Nitinol alloys was determined using Nano-scratch analysis. Sulforhodamine B (SRB) assays were performed to elucidate the effect of metal ions leached from Nitinol alloys on the viability of HUVEC cells. Scanning Electron Microscopy (SEM), X-ray Photoelectron Spectroscopy (XPS), contact angle meter and X-ray diffraction (XRD) were used to characterize the surface of the alloys. MEP treated and polymer coated (PC) Nitinol alloys displayed a corrosion resistant polymer coating as compared to uncoated alloys. MEP and PC has resulted in reduced Ni and Cr ion leaching from NiTi5Cr and subsequently low cytotoxicity. Thrombogenicity tests revealed significantly less platelet adhesion and confluent endothelial cell growth on polymer coated and uncoated ternary MEP Nitinol alloys. Finally, this research addresses the bio and hemocompatibility of MEP + PC ternary Nitinol alloys that could be used to manufacture blood contacting devices such as stents and vascular implants which can lead to lower U.S. healthcare spending.

American Perceptions of British Regional Dialects

Sociolinguists have discussed problematic language ideologies, such as Standard Language Ideology (Lippi-Green 1997) extensively and social perceptions of Standard English in the U.S and U.K are well documented. However, most work in this area has focused on perceptions of dialects within national contexts. This study makes a novel contribution to the study of language attitudes, investigating perceptions of British regional dialects within the U.S. A survey was created to gauge perceptions of five British regional dialects (Liverpool, Leeds, Birmingham, Newcastle, London). 49 survey participants listened to audio clips of British regional dialect speakers and then completed a mapping activity, answered perception questions, and ranked each speaker on specific qualities. Results showed that speaker region had a significant effect on perception of almost all variables at a statistically significant rate, despite unfamiliarity with all but the London dialect. Results suggest that although participants are largely unfamiliar with varieties of English in England outside of London, they assessed them by recruiting pre-existing stereotypes about vernacular dialects.

Molecular phylogenetics of the palm tribe Geonomeae, and differentiation of Geonoma macrostachys western Amazonian varieties

Phylogenetic analyses were performed on six genera and 46 species of the Neotropical palm tribe Geonomeae. The analyses were based on two low copy nuclear DNA sequences from the genes encoding phosphoribulokinase and RNA polymerase II. The basal node of the tribe was polytomous. Pholidostachys formed a monophyletic group. The currently accepted genera Calyptronoma and Calyptrogyne formed a well-supported clade with Calyptronoma resolved as paraphyletic to Calyptrogyne. Geonoma formed a strongly supported monophyletic group consisting of two main clades. ^ An evaluation of the genetic distinctness between Geonoma macrostachys varieties at a local and regional scale using inter-simple sequence repeat (ISSR) markers was performed. Clustering, ordination, and AMOVA suggested a lack of genetic distinctness between varieties at the regional level. A hierarchical AMOVA revealed that the genetic diversity mainly lies among the four localities sampled. A significant genetic differentiation between sympatric varieties occurred in one locality only. The current taxonomy of G. macrostachys, which recognizes only one species, was therefore supported. ^ The preferred habitat of sympatric G. macrostachys varieties with respect to edaphic, topographic, and light factors in three Peruvian lowland forests was studied. The two varieties were mostly encountered in different physiographically defined habitats, with variety acaulis occurring more often in floodplain forest and variety macrostachys in the tierra firme. Comparison of means tests revealed that nine to eleven of the 16 environmental variables were significantly different between varieties. Edaphic factors, mainly soil texture and K content, were better contributors than light conditions to distinguish the habitats occupied by the two varieties in all three study sites. It is concluded that habitat differentiation plays a role in the coexistence of these closely related species taxa. ^