Executive characteristics and going concern opinions

Auditors have come under increased scrutiny over the past several years about the growing number of client failures without a warning in the form of a going-concern modified (GCM) audit opinion. Statement on Auditing Standards No. 59 requires auditors to evaluate whether substantial doubt exists on an audit client’s ability to continue as a going concern (AICPA 1988). My dissertation consists of three essays. ^ For the three essays, I empirically investigate issues related to GCM audit opinions and executive characteristics. Specifically, I examine the impact of executive tenure and gender on the issuance of GCM audit opinions. In addition, my dissertation addresses two other unique issues. Given that the Sarbanes-Oxley Act represents an important watershed event in the history and regulation of the accounting profession, I provide evidence about auditors’ propensities to issue GCM audit opinions in the post-SOX period. Further, I also expand extant research in this area by using multiple outcomes and thus go beyond the traditional use of bankruptcy alone as a tool to evaluate auditors’ GCM opinion. ^ The results indicate that, after controlling for other financial characteristics, GCM audit opinions are significantly more likely for firms that have CFOs with short tenure and/or for firms with a female CFO or CEO. However, when examining the association between executive characteristics and two types of reporting errors, the results vary with the type of reporting error. Overall, the results provide evidence that executive characteristics are associated with auditors' reporting decisions. ^

Thermal imaging as a biometrics approach to facial signature authentication

This dissertation develops an image processing framework with unique feature extraction and similarity measurements for human face recognition in the thermal mid-wave infrared portion of the electromagnetic spectrum. The goals of this research is to design specialized algorithms that would extract facial vasculature information, create a thermal facial signature and identify the individual. The objective is to use such findings in support of a biometrics system for human identification with a high degree of accuracy and a high degree of reliability. This last assertion is due to the minimal to no risk for potential alteration of the intrinsic physiological characteristics seen through thermal infrared imaging. The proposed thermal facial signature recognition is fully integrated and consolidates the main and critical steps of feature extraction, registration, matching through similarity measures, and validation through testing our algorithm on a database, referred to as C-X1, provided by the Computer Vision Research Laboratory at the University of Notre Dame. Feature extraction was accomplished by first registering the infrared images to a reference image using the functional MRI of the Brain’s (FMRIB’s) Linear Image Registration Tool (FLIRT) modified to suit thermal infrared images. This was followed by segmentation of the facial region using an advanced localized contouring algorithm applied on anisotropically diffused thermal images. Thermal feature extraction from facial images was attained by performing morphological operations such as opening and top-hat segmentation to yield thermal signatures for each subject. Four thermal images taken over a period of six months were used to generate thermal signatures and a thermal template for each subject, the thermal template contains only the most prevalent and consistent features. Finally a similarity measure technique was used to match signatures to templates and the Principal Component Analysis (PCA) was used to validate the results of the matching process. Thirteen subjects were used for testing the developed technique on an in-house thermal imaging system. The matching using an Euclidean-based similarity measure showed 88% accuracy in the case of skeletonized signatures and templates, we obtained 90% accuracy for anisotropically diffused signatures and templates. We also employed the Manhattan-based similarity measure and obtained an accuracy of 90.39% for skeletonized and diffused templates and signatures. It was found that an average 18.9% improvement in the similarity measure was obtained when using diffused templates. The Euclidean- and Manhattan-based similarity measure was also applied to skeletonized signatures and templates of 25 subjects in the C-X1 database. The highly accurate results obtained in the matching process along with the generalized design process clearly demonstrate the ability of the thermal infrared system to be used on other thermal imaging based systems and related databases. A novel user-initialization registration of thermal facial images has been successfully implemented. Furthermore, the novel approach at developing a thermal signature template using four images taken at various times ensured that unforeseen changes in the vasculature did not affect the biometric matching process as it relied on consistent thermal features.

Through wafer 3D Vertical Micro-Coaxial Probe for high frequency material characterization and millimeter wave packaging systems

This work presents the development of an in-plane vertical micro-coaxial probe using bulk micromachining technique for high frequency material characterization. The coaxial probe was fabricated in a silicon substrate by standard photolithography and a deep reactive ion etching (DRIE) technique. The through-hole structure in the form of a coaxial probe was etched and metalized with a diluted silver paste. A co-planar waveguide configuration was integrated with the design to characterize the probe. The electrical and RF characteristics of the coaxial probe were determined by simulating the probe design in Ansoft's High Frequency Structure Simulator (HFSS). The reflection coefficient and transducer gain performance of the probe was measured up to 65 GHz using a vector network analyzer (VNA). The probe demonstrated excellent results over a wide frequency band, indicating its ability to integrate with millimeter wave packaging systems as well as characterize unknown materials at high frequencies. The probe was then placed in contact with 3 materials where their unknown permittivities were determined. To accomplish this, the coaxial probe was placed in contact with the material under test and electromagnetic waves were directed to the surface using the VNA, where its reflection coefficient was then determined over a wide frequency band from dc-to -65GHz. Next, the permittivity of each material was deduced from its measured reflection coefficients using a cross ratio invariance coding technique. The permittivity results obtained when measuring the reflection coefficient data were compared to simulated permittivity results and agreed well. These results validate the use of the micro-coaxial probe to characterize the permittivity of unknown materials at high frequencies up to 65GHz.

Executive Characteristics and Going Concern Opinions

Auditors have come under increased scrutiny over the past several years about the growing number of client failures without a warning in the form of a going-concern modified (GCM) audit opinion. Statement on Auditing Standards No. 59 requires auditors to evaluate whether substantial doubt exists on an audit client’s ability to continue as a going concern (AICPA 1988). My dissertation consists of three essays. For the three essays, I empirically investigate issues related to GCM audit opinions and executive characteristics. Specifically, I examine the impact of executive tenure and gender on the issuance of GCM audit opinions. In addition, my dissertation addresses two other unique issues. Given that the Sarbanes-Oxley Act represents an important watershed event in the history and regulation of the accounting profession, I provide evidence about auditors’ propensities to issue GCM audit opinions in the post-SOX period. Further, I also expand extant research in this area by using multiple outcomes and thus go beyond the traditional use of bankruptcy alone as a tool to evaluate auditors’ GCM opinion. The results indicate that, after controlling for other financial characteristics, GCM audit opinions are significantly more likely for firms that have CFOs with short tenure and/or for firms with a female CFO or CEO. However, when examining the association between executive characteristics and two types of reporting errors, the results vary with the type of reporting error. Overall, the results provide evidence that executive characteristics are associated with auditors' reporting decisions.

Microstructure Characteristics of U.S. Futures Markets

Prior finance literature lacks a comprehensive analysis of microstructure characteristics of U.S. futures markets due to the lack of data availability. Utilizing a unique data set for five different futures contract this dissertation fills this gap in the finance literature. In three essays price discovery, resiliency and the components of bid-ask spreads in electronic futures markets are examined. In order to provide comprehensive and robust analysis, both moderately volatile pre-crisis and volatile crisis periods are included in the analysis. The first essay entitled “Price Discovery and Liquidity Characteristics for U.S. Electronic Futures and ETF Markets” explores the price discovery process in U.S. futures and ETF markets. Hasbrouck’s information share method is applied to futures and ETF instruments. The information share results show that futures markets dominate the price discovery process. The results on the factors that affect the price discovery process show that when volatility increases, the price leadership of futures markets declines. Furthermore, when the relative size of bid-ask spread in one market increases, its information share decreases. The second essay, entitled “The Resiliency of Large Trades for U.S. Electronic Futures Markets,“ examines the effects of large trades in futures markets. How quickly prices and liquidity recovers after large trades is an important characteristic of financial markets. The price effects of large trades are greater during the crisis period compared to the pre-crisis period. Furthermore, relative to the pre-crisis period, during the crisis period it takes more trades until liquidity returns to the pre-block trade levels. The third essay, entitled “Components of Quoted Bid-Ask Spreads in U.S. Electronic Futures Markets,” investigates the bid-ask spread components in futures market. The components of bid-ask spreads is one of the most important subjects of microstructure studies. Utilizing Huang and Stoll’s (1997) method the third essay of this dissertation provides the first analysis of the components of quoted bid-ask spreads in U.S. electronic futures markets. The results show that order processing cost is the largest component of bid-ask spreads, followed by inventory holding costs. During the crisis period market makers increase bid-ask spreads due to increasing inventory holding and adverse selection risks.

Through Wafer 3D Vertical Micro-Coaxial Probe for High Frequency Material Characterization and Millimeter Wave Packaging Systems

This work presents the development of an in-plane vertical micro-coaxial probe using bulk micromachining technique for high frequency material characterization. The coaxial probe was fabricated in a silicon substrate by standard photolithography and a deep reactive ion etching (DRIE) technique. The through-hole structure in the form of a coaxial probe was etched and metalized with a diluted silver paste. A co-planar waveguide configuration was integrated with the design to characterize the probe. The electrical and RF characteristics of the coaxial probe were determined by simulating the probe design in Ansoft’s High Frequency Structure Simulator (HFSS). The reflection coefficient and transducer gain performance of the probe was measured up to 65 GHz using a vector network analyzer (VNA). The probe demonstrated excellent results over a wide frequency band, indicating its ability to integrate with millimeter wave packaging systems as well as characterize unknown materials at high frequencies. The probe was then placed in contact with 3 materials where their unknown permittivities were determined. To accomplish this, the coaxial probe was placed in contact with the material under test and electromagnetic waves were directed to the surface using the VNA, where its reflection coefficient was then determined over a wide frequency band from dc-to -65GHz. Next, the permittivity of each material was deduced from its measured reflection coefficients using a cross ratio invariance coding technique. The permittivity results obtained when measuring the reflection coefficient data were compared to simulated permittivity results and agreed well. These results validate the use of the micro-coaxial probe to characterize the permittivity of unknown materials at high frequencies up to 65GHz.