Essays on international macroeconomics and conflict analysis

This dissertation addressed two broad problems in international macroeconomics and conflict analysis. The first problem in the first chapter looked at the behavior of exchange rate and its interaction with industry-level tradable goods prices for three countries, USA, UK and Japan. This question has important monetary policy implications. Here, I computed to what extent changes in exchange rate affected prices of consumer, producer, and export goods. I also studied the timing of these changes in these prices. My results, based on thirty-four industrial prices for USA, UK and Japan, supported the view that changes in exchange rates significantly affect prices of industrial and consumer goods. It also provided an insight to the underlying economic process that led to changes in relative prices. ^ In the second chapter, I explored the predictability of future inflation by incorporating shocks to exchange rates and clearly specified the transmission mechanisms that link exchange rates to industry-level consumer and producer prices. Employing a variety of linear and state-of-the-art nonlinear models, I also predicted growth rates of future prices. Comparing levels of inflation obtained from the above approaches showed superiority of the structural model incorporating the exchange rate pass-through effect. ^ The second broad issue addressed in the third chapter of the dissertation investigated the economic motives for conflict, manifested by rebellion and civil war for seventeen Latin American countries. Based on the analytical framework of Garfinkel, Skaperdas and Syropoulos (2004), I employed ordinal regressions and Markov switching for a panel of seventeen countries to identify trade and openness factors responsible for conflict occurrence and intensity. The results suggested that increased trade openness reduced high intensity domestic conflicts but overdependence on agricultural exports, along with a lack of income earning opportunities lead to more conflicts. Thereafter, using the Cox Proportional Hazard model I studied “conflict duration” and found that over-reliance on agricultural exports explained a major part of the length of conflicts in addition to various socio-political factors. ^

Switching patterns and steady-state analysis of grid-connected and stand-alone single-stage boost-inverters for PV applications

Renewable or sustainable energy (SE) sources have attracted the attention of many countries because the power generated is environmentally friendly, and the sources are not subject to the instability of price and availability. This dissertation presents new trends in the DC-AC converters (inverters) used in renewable energy sources, particularly for photovoltaic (PV) energy systems. A review of the existing technologies is performed for both single-phase and three-phase systems, and the pros and cons of the best candidates are investigated. In many modern energy conversion systems, a DC voltage, which is provided from a SE source or energy storage device, must be boosted and converted to an AC voltage with a fixed amplitude and frequency. A novel switching pattern based on the concept of the conventional space-vector pulse-width-modulated (SVPWM) technique is developed for single-stage, boost-inverters using the topology of current source inverters (CSI). The six main switching states, and two zeros, with three switches conducting at any given instant in conventional SVPWM techniques are modified herein into three charging states and six discharging states with only two switches conducting at any given instant. The charging states are necessary in order to boost the DC input voltage. It is demonstrated that the CSI topology in conjunction with the developed switching pattern is capable of providing the required residential AC voltage from a low DC voltage of one PV panel at its rated power for both linear and nonlinear loads. In a micro-grid, the active and reactive power control and consequently voltage regulation is one of the main requirements. Therefore, the capability of the single-stage boost-inverter in controlling the active power and providing the reactive power is investigated. It is demonstrated that the injected active and reactive power can be independently controlled through two modulation indices introduced in the proposed switching algorithm. The system is capable of injecting a desirable level of reactive power, while the maximum power point tracking (MPPT) dictates the desirable active power. The developed switching pattern is experimentally verified through a laboratory scaled three-phase 200W boost-inverter for both grid-connected and stand-alone cases and the results are presented.

Switching Patterns and Steady-State Analysis of Grid-Connected and Stand-Alone Single-Stage Boost-Inverters for PV Applications

Renewable or sustainable energy (SE) sources have attracted the attention of many countries because the power generated is environmentally friendly, and the sources are not subject to the instability of price and availability. This dissertation presents new trends in the DC-AC converters (inverters) used in renewable energy sources, particularly for photovoltaic (PV) energy systems. A review of the existing technologies is performed for both single-phase and three-phase systems, and the pros and cons of the best candidates are investigated. In many modern energy conversion systems, a DC voltage, which is provided from a SE source or energy storage device, must be boosted and converted to an AC voltage with a fixed amplitude and frequency. A novel switching pattern based on the concept of the conventional space-vector pulse-width-modulated (SVPWM) technique is developed for single-stage, boost-inverters using the topology of current source inverters (CSI). The six main switching states, and two zeros, with three switches conducting at any given instant in conventional SVPWM techniques are modified herein into three charging states and six discharging states with only two switches conducting at any given instant. The charging states are necessary in order to boost the DC input voltage. It is demonstrated that the CSI topology in conjunction with the developed switching pattern is capable of providing the required residential AC voltage from a low DC voltage of one PV panel at its rated power for both linear and nonlinear loads. In a micro-grid, the active and reactive power control and consequently voltage regulation is one of the main requirements. Therefore, the capability of the single-stage boost-inverter in controlling the active power and providing the reactive power is investigated. It is demonstrated that the injected active and reactive power can be independently controlled through two modulation indices introduced in the proposed switching algorithm. The system is capable of injecting a desirable level of reactive power, while the maximum power point tracking (MPPT) dictates the desirable active power. The developed switching pattern is experimentally verified through a laboratory scaled three-phase 200W boost-inverter for both grid-connected and stand-alone cases and the results are presented.