Inspection of parts with complex geometry and welds with structural health monitoring techniques

Structural Health Monitoring (SHM) systems were developed to evaluate the integrity of a system during operation, and to quickly identify the maintenance problems. They will be used in future aerospace vehicles to improve safety, reduce cost and minimize the maintenance time of a system. Many SHM systems were already developed to evaluate the integrity of plates and used in marine structures. Their implementation in manufacturing processes is still expected. The application of SHM methods for complex geometries and welds are two important challenges in this area of research. This research work started by studying the characteristics of piezoelectric actuators, and a small energy harvester was designed. The output voltages at different frequencies of vibration were acquired to determine the nonlinear characteristics of the piezoelectric stripe actuators. The frequency response was evaluated experimentally. AA battery size energy harvesting devices were developed by using these actuators. When the round and square cross section devices were excited at 50 Hz frequency, they generated 16 V and 25 V respectively. The Surface Response to Excitation (SuRE) and Lamb wave methods were used to estimate the condition of parts with complex geometries. Cutting tools and welded plates were considered. Both approaches used piezoelectric elements that were attached to the surfaces of considered parts. The variation of the magnitude of the frequency response was evaluated when the SuRE method was used. The sum of the square of the differences was calculated. The envelope of the received signal was used for the analysis of wave propagation. Bi-orthogonal wavelet (Binlet) analysis was also used for the evaluation of the data obtained during Lamb wave technique. Both the Lamb wave and SuRE approaches along with the three methods for data analysis worked effectively to detect increasing tool wear. Similarly, they detected defects on the plate, on the weld, and on a separate plate without any sensor as long as it was welded to the test plate.

Selenium Distribution in the Human Retina

Selenium is known to occur in the enzyme, glutathione peroxidase, and plays an important role as an antioxidant. The objective of this investigation was to determine if amounts of selenium are selectively accumulated in different regions of the retina or uniformly distributed with eccentricity. 20 human retinas were analyzed for selenium. 18 of these were sectioned into a disc and two concentric annuli centered on the fovea using trephines having diameters of 3, 11, and 21 mm. The sections had areas of7.1, 93, and 343 mm2, respectively. Corresponding sections of these retinas were combined and analyzed together in sets of n = 5 and n = 11. For two donors, the whole retina of one eye was analyzed for selenium and the other retina was sectioned for analysis as described above. Selenium was determined using atomic fluorescence spectroscopy after digestion of the retinal tissues in nitric acid. The two whole retinas were found to have an average of 0.89 ± 0.49 pmoles/mm2 of selenium as compared to the companion which had 0.84 ± 0.28 pmoles/mm2 as determined from the sum of the selenium amounts measured in the individual sections. The inner, medial, and outer portions of these two sectioned retinas were found to contain an average of5.28 ± 1.1, 1.28 ± 0.44, 0.63 ± 0.22 pmoles/mm2, respectively. The five retinas that were sectioned and pooled for analysis were found to have average amounts of3.64, 1.26, and 0.56 pmoles/mm2 • The 11-sectioned retinas were found to have 1.16, 0.61, and 0.38 pmoles/mm2 respectively in the same three sections. This limited data set indicates that selenium is not uniformly distributed within the human retina but rather concentrated to a greater extent within the macula. If confirmed, these data would support the hypothesis that selenium may be an important antioxidant involved in protection of the macula from radical oxidants.

Development of New Structural Health Monitoring Techniques

During the past two decades, many researchers have developed methods for the detection of structural defects at the early stages to operate the aerospace vehicles safely and to reduce the operating costs. The Surface Response to Excitation (SuRE) method is one of these approaches developed at FIU to reduce the cost and size of the equipment. The SuRE method excites the surface at a series of frequencies and monitors the propagation characteristics of the generated waves. The amplitude of the waves reaching to any point on the surface varies with frequency; however, it remains consistent as long as the integrity and strain distribution on the part is consistent. These spectral characteristics change when cracks develop or the strain distribution changes. The SHM methods may be used for many applications, from the detection of loose screws to the monitoring of manufacturing operations. A scanning laser vibrometer was used in this study to investigate the characteristics of the spectral changes at different points on the parts. The study started with detecting a load on a plate and estimating its location. The modifications on the part with manufacturing operations were detected and the Part-Based Manufacturing Process Performance Monitoring (PbPPM) method was developed. Hardware was prepared to demonstrate the feasibility of the proposed methods in real time. Using low-cost piezoelectric elements and the non-contact scanning laser vibrometer successfully, the data was collected for the SuRE and PbPPM methods. Locational force, loose bolts and material loss could be easily detected by comparing the spectral characteristics of the arriving waves. On-line methods used fast computational methods for estimating the spectrum and detecting the changing operational conditions from sum of the squares of the variations. Neural networks classified the spectrums when the desktop – DSP combination was used. The results demonstrated the feasibility of the SuRE and PbPPM methods.

Resistance Performances: (Re)constructing Spaces of Resistance and Contention in the 2010-2011 University of Puerto Rico Student Movement

On the night of April 20, 2010, a group of students from the University of Puerto Rico (UPR), Río Piedras campus, met to organize an indefinite strike that quickly broadened into a defense of accessible public higher education of excellence as a fundamental right and not a privilege. Although the history of student activism in the UPR can be traced back to the early 1900s, the 2010-2011 strike will be remembered for the student activists’ use of new media technologies as resources that rapidly prompted and aided the numerous protests. This activist research entailed a critical ethnography and a critical discourse analysis (CDA) of traditional and alternative media coverage and treatment during the 2010 -2011 UPR student strike. I examined the use of the 2010-2011 UPR student activists’ resistance performances in constructing local, corporeal, and virtual spaces of resistance and contention during their movement. In particular, I analyzed the different tactics and strategies of resistance or repertoire of collective actions that student activists used (e.g. new media technologies) to frame their collective identities via alternative news media’s (re)presentation of the strike, while juxtaposing the university administration’s counter-resistance performances in counter-framing the student activists’ collective identity via traditional news media representations of the strike. I illustrated how both traditional and alternative media (re)presentations of student activism developed, maintained, and/or modified students activists’ collective identities. As such, the UPR student activism’s success should not be measured by the sum of demands granted, but by the sense of community achieved and the establishment of networks that continue to create resistance and change. These networks add to the debate surrounding Internet activism and its impact on student activism. Ultimately, the results of this study highlight the important role student movements have had in challenging different types of government policies and raising awareness of the importance of an accessible public higher education of excellence.

Development of New Structural Health Monitoring Techniques

During the past two decades, many researchers have developed methods for the detection of structural defects at the early stages to operate the aerospace vehicles safely and to reduce the operating costs. The Surface Response to Excitation (SuRE) method is one of these approaches developed at FIU to reduce the cost and size of the equipment. The SuRE method excites the surface at a series of frequencies and monitors the propagation characteristics of the generated waves. The amplitude of the waves reaching to any point on the surface varies with frequency; however, it remains consistent as long as the integrity and strain distribution on the part is consistent. These spectral characteristics change when cracks develop or the strain distribution changes. The SHM methods may be used for many applications, from the detection of loose screws to the monitoring of manufacturing operations. A scanning laser vibrometer was used in this study to investigate the characteristics of the spectral changes at different points on the parts. The study started with detecting a load on a plate and estimating its location. The modifications on the part with manufacturing operations were detected and the Part-Based Manufacturing Process Performance Monitoring (PbPPM) method was developed. Hardware was prepared to demonstrate the feasibility of the proposed methods in real time. Using low-cost piezoelectric elements and the non-contact scanning laser vibrometer successfully, the data was collected for the SuRE and PbPPM methods. Locational force, loose bolts and material loss could be easily detected by comparing the spectral characteristics of the arriving waves. On-line methods used fast computational methods for estimating the spectrum and detecting the changing operational conditions from sum of the squares of the variations. Neural networks classified the spectrums when the desktop – DSP combination was used. The results demonstrated the feasibility of the SuRE and PbPPM methods.

Resistance performances: (Re)constructing spaces of resistance and contention in the 2010-2011 University of Puerto Rico student movement

On the night of April 20, 2010, a group of students from the University of Puerto Rico (UPR), Río Piedras campus, met to organize an indefinite strike that quickly broadened into a defense of accessible public higher education of excellence as a fundamental right and not a privilege. Although the history of student activism in the UPR can be traced back to the early 1900s, the 2010-2011 strike will be remembered for the student activists’ use of new media technologies as resources that rapidly prompted and aided the numerous protests. ^ This activist research entailed a critical ethnography and a critical discourse analysis (CDA) of traditional and alternative media coverage and treatment during the 2010 -2011 UPR student strike. I examined the use of the 2010-2011 UPR student activists’ resistance performances in constructing local, corporeal, and virtual spaces of resistance and contention during their movement. In particular, I analyzed the different tactics and strategies of resistance or repertoire of collective actions that student activists used (e.g. new media technologies) to frame their collective identities via alternative news media’s (re)presentation of the strike, while juxtaposing the university administration’s counter-resistance performances in counter-framing the student activists’ collective identity via traditional news media representations of the strike. I illustrated how both traditional and alternative media (re)presentations of student activism developed, maintained, and/or modified students activists’ collective identities. ^ As such, the UPR student activism’s success should not be measured by the sum of demands granted, but by the sense of community achieved and the establishment of networks that continue to create resistance and change. These networks add to the debate surrounding Internet activism and its impact on student activism. Ultimately, the results of this study highlight the important role student movements have had in challenging different types of government policies and raising awareness of the importance of an accessible public higher education of excellence.^