Study of carbon nanotube film and shape memory alloys treatment for sensing and structural vibration control

Structural vibration control is of great importance. Current active and passive vibration control strategies usually employ individual elements to fulfill this task, such as viscoelastic patches for providing damping, transducers for picking up signals and actuators for inputting actuating forces. The goal of this dissertation work is to design, manufacture, investigate and apply a new type of multifunctional composite material for structural vibration control. This new composite, which is based on multi-walled carbon nanotube (MWCNT) film, is potentially to function as free layer damping treatment and strain sensor simultaneously. That is, the new material integrates the transducer and the damping patch into one element. The multifunctional composite was prepared by sandwiching the MWCNT film between two adhesive layers. Static sensing test indicated that the MWCNT film sensor resistance changes almost linearly with the applied load. Sensor sensitivity factors were comparable to those of the foil strain gauges. Dynamic test indicated that the MWCNT film sensor can outperform the foil strain gage in high frequency ranges. Temperature test indicated the MWCNT sensor had good temperature stability over the range of 237 K-363 K. The Young’s modulus and shear modulus of the MWCNT film composite were acquired by nanoindentation test and direct shear test, respectively. A free vibration damping test indicated that the MWCNT composite sensor can also provide good damping without adding excessive weight to the base structure. A new model for sandwich structural vibration control was then proposed. In this new configuration, a cantilever beam covered with MWCNT composite on top and one layer of shape memory alloy (SMA) on the bottom was used to illustrate this concept. The MWCNT composite simultaneously serves as free layer damping and strain sensor, and the SMA acts as actuator. Simple on-off controller was designed for controlling the temperature of the SMA so as to control the SMA recovery stress as input and the system stiffness. Both free and forced vibrations were analyzed. Simulation work showed that this new configuration for sandwich structural vibration control was successful especially for low frequency system.

Memory conformity: Actors and bystanders

This dissertation explored memory conformity effects on people who interacted with a confederate and of bystanders to that interaction. Two studies were carried out. Study 1 was conducted in the field. A male confederate approached a group of people at the beach and had a brief interaction. About a minute later a research assistant approached the group and administered a target-absent lineup to each person in the group. Analyses revealed that memory conformity occurred during the lineup task. Bystanders were twice as likely to conform as those who interacted with the confederate. Study 2 was carried out in a laboratory under controlled conditions. Participants were exposed to two events during their time in the laboratory. In one event, participants were shown a brief video with no determinate roles assigned. In the other event participants were randomly assigned to interact with a confederate (actor condition) or to witness that interaction (bystander condition). Participants were given memory tests on both events to understand the effects of participant role (actor vs. bystander) on memory conformity. Participants answered second to all questions, following a confederate acting as a participant, who disseminated misinformation on critical questions. Analyses revealed no significant differences in memory conformity between actors and bystanders during the movie memory task. However, differences were found for the interaction memory task such that bystanders conformed more than actors on two of four critical questions. Bystanders also conformed more than actors during a lineup identification task. The results of these studies suggest that the role a person plays in an interaction affects how susceptible they are to information from a co-witness. Theoretical and applied implications are discussed. First, the results are explained through the use of two models of memory. Second, recommendations are made for forensic investigators.

Optimizing storage and memory systems for energy and performance

Electrical energy is an essential resource for the modern world. Unfortunately, its price has almost doubled in the last decade. Furthermore, energy production is also currently one of the primary sources of pollution. These concerns are becoming more important in data-centers. As more computational power is required to serve hundreds of millions of users, bigger data-centers are becoming necessary. This results in higher electrical energy consumption. Of all the energy used in data-centers, including power distribution units, lights, and cooling, computer hardware consumes as much as 80%. Consequently, there is opportunity to make data-centers more energy efficient by designing systems with lower energy footprint. Consuming less energy is critical not only in data-centers. It is also important in mobile devices where battery-based energy is a scarce resource. Reducing the energy consumption of these devices will allow them to last longer and re-charge less frequently. Saving energy in computer systems is a challenging problem. Improving a system's energy efficiency usually comes at the cost of compromises in other areas such as performance or reliability. In the case of secondary storage, for example, spinning-down the disks to save energy can incur high latencies if they are accessed while in this state. The challenge is to be able to increase the energy efficiency while keeping the system as reliable and responsive as before. This thesis tackles the problem of improving energy efficiency in existing systems while reducing the impact on performance. First, we propose a new technique to achieve fine grained energy proportionality in multi-disk systems; Second, we design and implement an energy-efficient cache system using flash memory that increases disk idleness to save energy; Finally, we identify and explore solutions for the page fetch-before-update problem in caching systems that can: (a) control better I/O traffic to secondary storage and (b) provide critical performance improvement for energy efficient systems.

Implicit eyewitness memory

After a crime has occurred, one of the most pressing objectives for investigators is to identify and interview any eyewitness that can provide information about the crime. Depending on his or her training, the investigative interviewer will use (to varying degrees) mostly yes/no questions, some cued and multiple-choice questions, with few open-ended questions. When the witness cannot generate any more details about the crime, one assumes the eyewitness' memory for the critical event has been exhausted. However, given what we know about memory, is this a safe assumption? In line with the extant literature on human cognition, if one assumes (a) an eyewitness has more available memories of the crime than he or she has accessible and (b) only explicit probes have been used to elicit information, then one can argue this eyewitness may still be able to provide additional information via implicit memory tests. In accordance with these notions, the present study had two goals: demonstrate that (1) eyewitnesses can reveal memory implicitly for a detail-rich event and (2) particularly for brief crimes, eyewitnesses can reveal memory for event details implicitly that were inaccessible when probed for explicitly. Undergraduates (N = 227) participated in a psychological experiment in exchange for research credit. Participants were presented with one of three stimulus videos (brief crime vs. long crime vs. irrelevant video). Then, participants either completed a series of implicit memory tasks or worked on a puzzle for 5 minutes. Lastly, participants were interviewed explicitly about the previous video via free recall and recognition tasks. Findings indicated that participants who viewed the brief crime provided significantly more crime-related details implicitly than those who viewed the long crime. The data also showed participants who viewed the long crime provided marginally more accurate details during free recall than participants who viewed the brief crime. Furthermore, participants who completed the implicit memory tasks provided significantly less accurate information during the explicit interview than participants who were not given implicit memory tasks. This study was the first to investigate implicit memory for eyewitnesses of a crime. To determine its applied value, additional empirical work is required.