Crack tip stress study for elastic-perfectly plastic materials with some applications

The problems of plasticity and non-linear fracture mechanics have been generally recognized as the most difficult problems of solid mechanics. The present dissertation is devoted to some problems on the intersection of both plasticity and non-linear fracture mechanics. The crack tip is responsible for the crack growth and therefore is the focus of fracture science. The problem of crack has been studied by an army of outstanding scholars and engineers in this century, but has not, as yet, been solved for many important practical situations. The aim of this investigation is to provide an analytical solution to the problem of plasticity at the crack tip for elastic-perfectly plastic materials and to apply the solution to a classical problem of the mechanics of composite materials.^ In this work, the stresses inside the plastic region near the crack tip in a composite material made of two different elastic-perfectly plastic materials are studied. The problems of an interface crack, a crack impinging an interface at the right angle and at arbitrary angles are examined. The constituent materials are assumed to obey the Huber-Mises yielding condition criterion. The theory of slip lines for plane strain is utilized. For the particular homogeneous case these problems have two solutions: the continuous solution found earlier by Prandtl and modified by Hill and Sokolovsky, and the discontinuous solution found later by Cherepanov. The same type of solutions were discovered in the inhomogeneous problems of the present study. Some reasons to prefer the discontinuous solution are provided. The method is also applied to the analysis of a contact problem and a push-in/pull-out problem to determine the critical load for plasticity in these classical problems of the mechanics of composite materials.^ The results of this dissertation published in three journal articles (two of which are under revision) will also be presented in the Invited Lecture at the 7$\rm\sp{th}$ International Conference on Plasticity (Cancun, Mexico, January 1999). ^

The effectiveness of training educators on their ability to identify function of problem behavior

The purpose of this study was to investigate the effectiveness of training educators in the pre-behavioral intervention process of functional behavioral assessment. An original evaluation instrument was developed entitled, The Survey for Students Exhibiting Challenging Behavior. The instrument included measures of participating educators, knowledge of function of problem behavior and their ability to generate recommendations for a behavior intervention plan. The instrument was distributed to schools in a large urban district and completed by special educators. Educators trained and untrained in the functional behavioral assessment process were compared in the study. ^ The study incorporated a post-test only design. All instruments were analyzed using a factorial ANOVA. Those educators who were trained in the district functional behavioral assessment program answered general questions related to function of problem behavior significantly better than those who did not receive training. There is no significant difference between educators on their ability to generate recommendations for behavior intervention plans. It is important that educators receive training in functional behavioral assessment to gain an understanding of the basic notions being function of problem behavior. Current training does not translate into educators' ability to make strong recommendations for behavior intervention plans. ^

Development of a medium-capacity guideway transit planning guide

Rapid population increase and booming economic growth have caused a significant escalation in car ownership in many cities, leading to additional or, multiple traffic problems on congested roadways. The increase of automobiles is generating a significant amount of congestion and pollution in many cities. It has become necessary to find a solution to the ever worsening traffic problems in our cities. Building more roadways is nearly impossible due to the limitations of right-of-way in cities. Studies have shown that guideway transit could provide effective transportation and could stimulate land development. The Medium-Capacity Guideway Transit (MCGT) is one of the alternatives to solve this problem. The objective of this research was to better understand the characteristics of MCGT systems, to investigate the existing MCGT systems around the world and determine the main factors behind the planning of successful systems, and to develop a MCGT planning guide. The factors utilized in this study were determined and were analyzed using Excel. A MCGT Planning Guide was developed using Microsoft Visual Basic. ^ A MCGT was defined as a transit system whose capacity can carry up to 20,000 passengers per hour per direction (pphpd). The results shown that Light Rail Transit (LRT) is favored when peak hour demand is less than 13,000 pphpd. Automated People Mover (APM) is favored when the peak hour demand is more than 18,000 pphpd. APM systems could save up to three times the waiting time cost compared to that of the LRT. If comfort and convenience are important, then using an APM does make sense. However, if cost is the critical factor, then LRT will make more sense because it is reasonable service at a reasonable price. If travel time and safety (accident/crush) costs were included in calculating life-cycle “total” costs, the capital cost advantage of LRT disappeared and APM could become very competitive. The results also included a range of cost-performance criteria for MCGT systems that help planners, engineers, and decision-makers to select the most feasible system for their respective areas. ^

The order selection and lot sizing problem in the make-to-order environment

This research is motivated by the need for considering lot sizing while accepting customer orders in a make-to-order (MTO) environment, in which each customer order must be delivered by its due date. Job shop is the typical operation model used in an MTO operation, where the production planner must make three concurrent decisions; they are order selection, lot size, and job schedule. These decisions are usually treated separately in the literature and are mostly led to heuristic solutions. The first phase of the study is focused on a formal definition of the problem. Mathematical programming techniques are applied to modeling this problem in terms of its objective, decision variables, and constraints. A commercial solver, CPLEX is applied to solve the resulting mixed-integer linear programming model with small instances to validate the mathematical formulation. The computational result shows it is not practical for solving problems of industrial size, using a commercial solver. The second phase of this study is focused on development of an effective solution approach to this problem of large scale. The proposed solution approach is an iterative process involving three sequential decision steps of order selection, lot sizing, and lot scheduling. A range of simple sequencing rules are identified for each of the three subproblems. Using computer simulation as the tool, an experiment is designed to evaluate their performance against a set of system parameters. For order selection, the proposed weighted most profit rule performs the best. The shifting bottleneck and the earliest operation finish time both are the best scheduling rules. For lot sizing, the proposed minimum cost increase heuristic, based on the Dixon-Silver method performs the best, when the demand-to-capacity ratio at the bottleneck machine is high. The proposed minimum cost heuristic, based on the Wagner-Whitin algorithm is the best lot-sizing heuristic for shops of a low demand-to-capacity ratio. The proposed heuristic is applied to an industrial case to further evaluate its performance. The result shows it can improve an average of total profit by 16.62%. This research contributes to the production planning research community with a complete mathematical definition of the problem and an effective solution approach to solving the problem of industry scale.

Bahamian men's sexual risks for HIV infection

Heterosexual adult men have been a neglected population that is at risk for HIV infection. In an era burdened by the devastation caused by HIV, it is alarming that risky sexual behavior continues to be a problem among heterosexuals. Heterosexual sexual behavior has contributed to a growing trend of HIV transmission in the Caribbean where the average prevalence in the adult population is 5%. Despite the availability of condoms and HIV prevention efforts of many Caribbean public health departments to reduce the spread of the disease, there appears to be barriers to safer sex practices. Guided by the theory of planned behavior, a descriptive correlational design was used with 185 Bahamian men ages 18 years and older to (a) examine the relationships among select demographics, masculine ideology, condom attitudes, self-efficacy for condom use, and safer sex behaviors; and (b) identify select predictors of condom use among Bahamian men. Data were collected using four standardized instruments and a demographic questionnaire. The results of this study suggest that masculine ideology, condom attitudes, and condom use self-efficacy are important in explaining 33% variance in safer sex behaviors among Bahamian men. Income (β = −.15, p < .01), masculine ideology (β = −.24, p < .01), condom attitudes, (β = .36, p < .01), and condom use self-efficacy (β = .1, p < .01) were significantly associated with safer sex behaviors. The empirical knowledge obtained from this study will be used to provide a rationale for nurses and policy makers to design and conduct culturally sensitive interventions with an aim of achieving an increase in safer sex behaviors among Bahamian men.^

Service Quality and Black Customer Satisfaction - A Perspective on the United States Restaurant Industry

This paper examines the issue of racial discrimination of Black United States (U.S.) restaurant patrons from a service quality and customer satisfaction perspective. In spite of the progress the industry has made in recent years to alleviate this problem, many contemporary examples clearly demonstrate that racial discrimination is still of great concern. The articles stresses the importance of an ethical approach in human resource management-intensive and offers suggestions for reducing discriminatory practices in U.S. restaurant service delivery.

The Nevada Gaming Debt Collection Experience

In the discussion - The Nevada Gaming Debt Collection Experience - by Larry D. Strate, Assistant Professor, College of Business and Economics at the University of Nevada, Las Vegas, Assistant Professor Strate initially outlines the article by saying: “Even though Nevada has had over a century of legalized gaming experience, the evolution of gaming debt collection has been a recent phenomenon. The author traces that history and discusses implications of the current law.” The discussion opens with a comparison between the gaming industries of New Jersey/Atlantic City, and Las Vegas, Nevada. This contrast serves to point out the disparities in debt handling between the two. “There are major differences in the development of legalized gaming for both Nevada and Atlantic City. Nevada has had over a century of legalized gambling; Atlantic City, New Jersey, has completed a decade of its operation,” Strate informs you. “Nevada's gaming industry has been its primary economic base for many years; Atlantic City's entry into gaming served as a possible solution to a social problem. Nevada's processes of legalized gaming, credit play, and the collection of gaming debts were developed over a period of 125 years; Atlantic City's new industry began with gaming, gaming credit, and gaming debt collection simultaneously in 1976 [via the New Jersey Casino Control Act] .” The irony here is that Atlantic City, being the younger venue, had or has a better system for handling debt collection than do the historic and traditional Las Vegas properties. Many of these properties were duplicated in New Jersey, so the dichotomy existed whereby New Jersey casinos could recoup debt while their Nevada counterparts could not. “It would seem logical that a "territory" which permitted gambling in the early 1800’s would have allowed the Nevada industry to collect its debts as any other legal enterprise. But it did not,” Strate says. Of course, this situation could not be allowed to continue and Strate outlines the evolution. New Jersey tactfully benefitted from Nevada’s experience. “The fundamental change in gaming debt collection came through the legislature as the judicial decisions had declared gaming debts uncollectable by either a patron or a casino,” Strate informs you. “Nevada enacted its gaming debt collection act in 1983, six years after New Jersey,” Strate points out. One of the most noteworthy paragraphs in the entire article is this: “The fundamental change in 1983, and probably the most significant change in the history of gaming in Nevada since the enactment of the Open Gaming Law of 1931, was to allow non-restricted gaming licensees* to recover gaming debts evidenced by a credit instrument. The new law incorporated previously litigated terms with a new one, credit instrument.” The term is legally definable and gives Nevada courts an avenue of due process.

Subject -centered and problem -based approaches to teaching clinical competence in physical therapy

Physical therapy students must apply the relevant information learned in their academic and clinical experience to problem solve in treating patients. I compared the clinical cognitive competence in patient care of second-year masters students enrolled in two different curricular programs: modified problem-based (M P-B; n = 27) and subject-centered (S-C; n = 41). Main features of S-C learning include lecture and demonstration as the major teaching strategies and no exposure to patients or problem solving learning until the sciences (knowledge) have been taught. Comparatively, main features of M P-B learning include case study in small student groups as the main teaching strategy, early and frequent exposure to patients, and knowledge and problem solving skills learned together for each specific case. Basic and clinical orthopedic knowledge was measured with a written test with open-ended items. Problem solving skills were measured with a written case study patient problem test yielding three subscores: assessment, problem identification, and treatment planning. ^ Results indicated that among the demographic and educational characteristics analyzed, there was a significant difference between groups on ethnicity, bachelor degree type, admission GPA, and current GPA, but there was no significant difference on gender, age, possession of a physical therapy assistant license, and GRE score. In addition, the M P-B group achieved a significantly higher adjusted mean score on the orthopedic knowledge test after controlling for GRE scores. The S-C group achieved a significantly higher adjusted mean total score and treatment management subscore on the case study test after controlling for orthopedic knowledge test scores. These findings did not support their respective research hypotheses. There was no significant difference between groups on the assessment and problem identification subscores of the case study test. The integrated M P-B approach promoted superior retention of basic and clinical science knowledge. The results on problem solving skills were mixed. The S-C approach facilitated superior treatment planning skills, but equivalent patient assessment and problem identification skills by emphasizing all equally and exposing the students to more patients with a wider variety of orthopedic physical therapy needs than in the M P-B approach. ^

Management of remote field instrumentation via the Internet

Supervisory Control & Data Acquisition (SCADA) systems are used by many industries because of their ability to manage sensors and control external hardware. The problem with commercially available systems is that they are restricted to a local network of users that use proprietary software. There was no Internet development guide to give remote users out of the network, control and access to SCADA data and external hardware through simple user interfaces. To solve this problem a server/client paradigm was implemented to make SCADAs available via the Internet. Two methods were applied and studied: polling of a text file as a low-end technology solution and implementing a Transmission Control Protocol (TCP/IP) socket connection. Users were allowed to login to a website and control remotely a network of pumps and valves interfaced to a SCADA. This enabled them to sample the water quality of different reservoir wells. The results were based on real time performance, stability and ease of use of the remote interface and its programming. These indicated that the most feasible server to implement is the TCP/IP connection. For the user interface, Java applets and Active X controls provide the same real time access.

Performance analysis of disk mirroring techniques

Unequaled improvements in processor and I/O speeds make many applications such as databases and operating systems to be increasingly I/O bound. Many schemes such as disk caching and disk mirroring have been proposed to address the problem. In this thesis we focus only on disk mirroring. In disk mirroring, a logical disk image is maintained on two physical disks allowing a single disk failure to be transparent to application programs. Although disk mirroring improves data availability and reliability, it has two major drawbacks. First, writes are expensive because both disks must be updated. Second, load balancing during failure mode operation is poor because all requests are serviced by the surviving disk. Distorted mirrors was proposed to address the write problem and interleaved declustering to address the load balancing problem. In this thesis we perform a comparative study of these two schemes under various operating modes. In addition we also study traditional mirroring to provide a common basis for comparison.

Theorizing suburban public space in Kendall

The purpose of this study was to determine whether public space in the suburbs has the same settings as that of a central city or if it has its own characteristics. In order to approach this problem the area of Kendall was thoroughly studied by examining aerial maps, historic images and writings of local historians such as Donna Knowles Born. Heavy emphasis was placed on the transformation of the original one-mile grid characteristic of the city of Miami. As the area of Kendall was being developed, the grid was transformed into an irregular and organic method of laying out a street system that directly affected pedestrian life. It became evident, therefore, that Kendall is primarily geared toward automobile movement, thus affecting the setting of public space. This also restricted social events forcing them to concentrate in specific places like the malls. These findings demonstrated that malls are centers of social interaction concentrating many social activities in one place. In other words, a mall serves as a common meeting place in the otherwise vast spread of the suburbs. This thesis also explains how public spaces in a suburban context can affect the community by working as filtering agents between the immediate context of a particular site and the overall city. The project, a "Wellness Center and Park" for the Kendall area, was an exploration of these filtering agents and the transitions they engendered. The research upon which this project was based recognized the important role of the site's history as well as extrapolating as to its future potential.

MobiMed: Framework for Rapid Application Development of Medical Mobile Apps

In the medical field images obtained from high definition cameras and other medical imaging systems are an integral part of medical diagnosis. The analysis of these images are usually performed by the physicians who sometimes need to spend long hours reviewing the images before they are able to come up with a diagnosis and then decide on the course of action. In this dissertation we present a framework for a computer-aided analysis of medical imagery via the use of an expert system. While this problem has been discussed before, we will consider a system based on mobile devices. Since the release of the iPhone on April 2003, the popularity of mobile devices has increased rapidly and our lives have become more reliant on them. This popularity and the ease of development of mobile applications has now made it possible to perform on these devices many of the image analyses that previously required a personal computer. All of this has opened the door to a whole new set of possibilities and freed the physicians from their reliance on their desktop machines. The approach proposed in this dissertation aims to capitalize on these new found opportunities by providing a framework for analysis of medical images that physicians can utilize from their mobile devices thus remove their reliance on desktop computers. We also provide an expert system to aid in the analysis and advice on the selection of medical procedure. Finally, we also allow for other mobile applications to be developed by providing a generic mobile application development framework that allows for access of other applications into the mobile domain. In this dissertation we outline our work leading towards development of the proposed methodology and the remaining work needed to find a solution to the problem. In order to make this difficult problem tractable, we divide the problem into three parts: the development user interface modeling language and tooling, the creation of a game development modeling language and tooling, and the development of a generic mobile application framework. In order to make this problem more manageable, we will narrow down the initial scope to the hair transplant, and glaucoma domains.

An aspect-oriented approach to designing role-based access control services

Access control (AC) limits access to the resources of a system only to authorized entities. Given that information systems today are increasingly interconnected, AC is extremely important. The implementation of an AC service is a complicated task. Yet the requirements to an AC service vary a lot. Accordingly, the design of an AC service should be flexible and extensible in order to save development effort and time. Unfortunately, with conventional object-oriented techniques, when an extension has not been anticipated at the design time, the modification incurred by the extension is often invasive. Invasive changes destroy design modularity, further deteriorate design extensibility, and even worse, they reduce product reliability. ^ A concern is crosscutting if it spans multiple object-oriented classes. It was identified that invasive changes were due to the crosscutting nature of most unplanned extensions. To overcome this problem, an aspect-oriented design approach for AC services was proposed, as aspect-oriented techniques could effectively encapsulate crosscutting concerns. The proposed approach was applied to develop an AC framework that supported role-based access control model. In the framework, the core role-based access control mechanism is given in an object-oriented design, while each extension is captured as an aspect. The resulting framework is well-modularized, flexible, and most importantly, supports noninvasive adaptation. ^ In addition, a process to formalize the aspect-oriented design was described. The purpose is to provide high assurance for AC services. Object-Z was used to specify the static structure and Predicate/Transition net was used to model the dynamic behavior. Object-Z was extended to facilitate specification in an aspect-oriented style. The process of formal modeling helps designers to enhance their understanding of the design, hence to detect problems. Furthermore, the specification can be mathematically verified. This provides confidence that the design is correct. It was illustrated through an example that the model was ready for formal analysis. ^

Abstractions to support dynamic adaptation of communication frameworks for user-centric communication

The convergence of data, audio and video on IP networks is changing the way individuals, groups and organizations communicate. This diversity of communication media presents opportunities for creating synergistic collaborative communications. This form of collaborative communication is however not without its challenges. The increasing number of communication service providers coupled with a combinatorial mix of offered services, varying Quality-of-Service and oscillating pricing of services increases the complexity for the user to manage and maintain ‘always best’ priced or performance services. Consumers have to manually manage and adapt their communication in line with differences in services across devices, networks and media while ensuring that the usage remain consistent with their intended goals. This dissertation proposes a novel user-centric approach to address this problem. The proposed approach aims to reduce the aforementioned complexity to the user by (1) providing high-level abstractions and a policy based methodology for automated selection of the communication services guided by high-level user policies and (2) providing services through the seamless integration of multiple communication service providers and providing an extensible framework to support the integration of multiple communication service providers. The approach was implemented in the Communication Virtual Machine (CVM), a model-driven technology for realizing communication applications. The CVM includes the Network Communication Broker, the layer responsible for providing a network-independent API to the upper layers of CVM. The initial prototype for the NCB supported only a single communication framework which limited the number, quality and types of services available. Experimental evaluation of the approach show the additional overhead of the approach is minimal compared to the individual communication services frameworks. Additionally the automated approach proposed out performed the individual communication services frameworks for cross framework switching.

Strategic positioning of Taiwan in the outsourcing market: Evidence from information technology services and electronic manufacturing outsourcing to China

In outsourcing relationships with China, the Electronic Manufacturing (EM) and Information Technology Services (ITS) industry in Taiwan may possess such advantages as the continuing growth of its production value, complete manufacturing supply chain, low production cost and a large-scale Chinese market, and language and culture similarity compared to outsourcing to other countries. Nevertheless, the Council for Economic Planning and Development of Executive Yuan (CEPD) found that Taiwan's IT services outsourcing to China is subject to certain constraints and might not be as successful as the EM outsourcing (Aggarwal, 2003; CEPD, 2004a; CIER, 2003; Einhorn and Kriplani, 2003; Kumar and Zhu, 2006; Li and Gao, 2003; MIC, 2006). Some studies examined this issue, but failed to (1) provide statistical evidence about lower prevalence rates of IT services outsourcing, and (2) clearly explain the lower prevalence rates of IT services outsourcing by identifying similarities and differences between both types of outsourcing contexts. This research seeks to fill that gap and possibly provide potential strategic guidelines to ITS firms in Taiwan. This study adopts Transaction Cost Economics (TCE) as the theoretical basis. The basic premise is that different types of outsourcing activities may incur differing transaction costs and realize varying degrees of outsourcing success due to differential attributes of the transactions in the outsourcing process. Using primary data gathered from questionnaire surveys of ninety two firms, the results from exploratory analysis and binary logistic regression indicated that (1) when outsourcing to China, Taiwanese firms' ITS outsourcing tends to have higher level of asset specificity, uncertainty and technical skills relative to EM outsourcing, and these features indirectly reduce firms' outsourcing prevalence rates via their direct positive impacts on transaction costs; (2) Taiwanese firms' ITS outsourcing tends to have lower level of transaction structurability relative to EM outsourcing, and this feature indirectly increases firms' outsourcing prevalence rates via its direct negative impacts on transaction costs; (3) frequency does influence firms' transaction costs in ITS outsourcing positively, but does not bring impacts into their outsourcing prevalence rates, (4) relatedness does influence firms' transaction costs positively and prevalence rates negatively in ITS outsourcing, but its impacts on the prevalence rates are not caused by the mediation effects of transaction costs, and (5) firm size of outsourcing provider does not affect firms' transaction costs, but does affect their outsourcing prevalence rates in ITS outsourcing directly and positively. Using primary data gathered from face-to-face interviews of executives from seven firms, the results from inductive analysis indicated that (1) IT services outsourcing has lower prevalence rates than EM outsourcing, and (2) this result is mainly attributed to Taiwan's core competence in manufacturing and management and higher overall transaction costs of IT services outsourcing. Specifically, there is not much difference between both types of outsourcing context in the transaction characteristics of reputation and most aspects of overall comparison. Although there are some differences in the feature of firm size of the outsourcing provider, the difference doesn't cause apparent impacts on firms' overall transaction costs. The medium or above medium difference in the transaction characteristics of asset specificity, uncertainty, frequency, technical skills, transaction structurability, and relatedness has caused higher overall transaction costs for IT services outsourcing. This higher cost might cause lower prevalence rates for ITS outsourcing relative to EM outsourcing. Overall, the interview results are consistent with the statistical analyses and provide support to my expectation that in outsourcing to China, Taiwan's electronic manufacturing firms do have lower prevalence rates of IT services outsourcing relative to EM outsourcing due to higher transaction costs caused by certain attributes. To solve this problem, firms' management should aim at identifying alternative strategies and strive to reduce their overall transaction costs of IT services outsourcing by initiating appropriate strategies which fit their environment and needs.