GIS-integrated mathematical modeling of social phenomena at macro- and micro- levels—a multivariate geographically-weighted regression model for identifying locations vulnerable to hosting terrorist safe-houses: France as case study

Adaptability and invisibility are hallmarks of modern terrorism, and keeping pace with its dynamic nature presents a serious challenge for societies throughout the world. Innovations in computer science have incorporated applied mathematics to develop a wide array of predictive models to support the variety of approaches to counterterrorism. Predictive models are usually designed to forecast the location of attacks. Although this may protect individual structures or locations, it does not reduce the threat—it merely changes the target. While predictive models dedicated to events or social relationships receive much attention where the mathematical and social science communities intersect, models dedicated to terrorist locations such as safe-houses (rather than their targets or training sites) are rare and possibly nonexistent. At the time of this research, there were no publically available models designed to predict locations where violent extremists are likely to reside. This research uses France as a case study to present a complex systems model that incorporates multiple quantitative, qualitative and geospatial variables that differ in terms of scale, weight, and type. Though many of these variables are recognized by specialists in security studies, there remains controversy with respect to their relative importance, degree of interaction, and interdependence. Additionally, some of the variables proposed in this research are not generally recognized as drivers, yet they warrant examination based on their potential role within a complex system. This research tested multiple regression models and determined that geographically-weighted regression analysis produced the most accurate result to accommodate non-stationary coefficient behavior, demonstrating that geographic variables are critical to understanding and predicting the phenomenon of terrorism. This dissertation presents a flexible prototypical model that can be refined and applied to other regions to inform stakeholders such as policy-makers and law enforcement in their efforts to improve national security and enhance quality-of-life.

Infants' selective attention to faces and prosody of speech: The roles of intersensory redundancy and exploratory time

One of the overarching questions in the field of infant perceptual and cognitive development concerns how selective attention is organized during early development to facilitate learning. The following study examined how infants' selective attention to properties of social events (i.e., prosody of speech and facial identity) changes in real time as a function of intersensory redundancy (redundant audiovisual, nonredundant unimodal visual) and exploratory time. Intersensory redundancy refers to the spatially coordinated and temporally synchronous occurrence of information across multiple senses. Real time macro- and micro-structural change in infants' scanning patterns of dynamic faces was also examined. ^ According to the Intersensory Redundancy Hypothesis, information presented redundantly and in temporal synchrony across two or more senses recruits infants' selective attention and facilitates perceptual learning of highly salient amodal properties (properties that can be perceived across several sensory modalities such as the prosody of speech) at the expense of less salient modality specific properties. Conversely, information presented to only one sense facilitates infants' learning of modality specific properties (properties that are specific to a particular sensory modality such as facial features) at the expense of amodal properties (Bahrick & Lickliter, 2000, 2002). ^ Infants' selective attention and discrimination of prosody of speech and facial configuration was assessed in a modified visual paired comparison paradigm. In redundant audiovisual stimulation, it was predicted infants would show discrimination of prosody of speech in the early phases of exploration and facial configuration in the later phases of exploration. Conversely, in nonredundant unimodal visual stimulation, it was predicted infants would show discrimination of facial identity in the early phases of exploration and prosody of speech in the later phases of exploration. Results provided support for the first prediction and indicated that following redundant audiovisual exposure, infants showed discrimination of prosody of speech earlier in processing time than discrimination of facial identity. Data from the nonredundant unimodal visual condition provided partial support for the second prediction and indicated that infants showed discrimination of facial identity, but not prosody of speech. The dissertation study contributes to the understanding of the nature of infants' selective attention and processing of social events across exploratory time.^

Global factors affecting women's participation in leadership

This dissertation is a multi-level, cross-cultural study of women in leadership conducted with both macro-society data and individual-level data aggregated to the country level. The research questions are, “What macro and micro forces are hindering or advancing women into business or political leadership?” “How do these forces impact the level of women's involvement in business and political leadership in a particular country?” Data was collected from 10 secondary sources, available for 213 countries, and includes about 300 variables for business leadership (N=115) and political leadership (N=181). To date, most women in leadership research has been Western- or US-based, and little rigorous empirical, multi-level research has been done across countries. The importance of cross-cultural studies on women in leadership stems from the potential to better understand why some countries have more women in positions of both business and political leadership; and the factors that affect women's involvement in such positions in different countries. A “Levels of Women's Participation in Leadership” country model is tested using cluster and discriminant analyses. Results indicate that the factors that affect women?s participation in leadership in countries with fewer women leaders are different from the factors that affect women's participation in countries with high levels of participation. This dissertation proposes that initiatives to increase participation of women in leadership need to consider the relevant factors that significantly affect countries at certain Levels of Women's Participation in Leadership. ^

Global Factors Affecting Women's Participation in Leadership

This dissertation is a multi-level, cross-cultural study of women in leadership conducted with both macro-society data and individual-level data aggregated to the country level. The research questions are, “What macro and micro forces are hindering or advancing women into business or political leadership?” “How do these forces impact the level of women’s involvement in business and political leadership in a particular country?” Data was collected from 10 secondary sources, available for 213 countries, and includes about 300 variables for business leadership (N=115) and political leadership (N=181). To date, most women in leadership research has been Western- or US- based, and little rigorous empirical, multi-level research has been done across countries. The importance of cross-cultural studies on women in leadership stems from the potential to better understand why some countries have more women in positions of both business and political leadership; and the factors that affect women’s involvement in such positions in different countries. A “Levels of Women’s Participation in Leadership” country model is tested using cluster and discriminant analyses. Results indicate that the factors that affect women’s participation in leadership in countries with fewer women leaders are different from the factors that affect women’s participation in countries with high levels of participation. This dissertation proposes that initiatives to increase participation of women in leadership need to consider the relevant factors that significantly affect countries at certain Levels of Women’s Participation in Leadership.

Development and implementation of a tool to assess the micro/macro elements in an organization

This study examines the congruency of planning between organizational structure and process, through an evaluation and planning model known as the Micro/Macro Dynamic Planning Grid. The model compares day-to-day planning within an organization to planning imposed by organizational administration and accrediting agencies. A survey instrument was developed to assess the micro and macro sociological analysis elements utilized by an organization.^ The Micro/Macro Dynamic Planning Grid consists of four quadrants. Each quadrant contains characteristics that reflect the interaction between the micro and macro elements of planning, objectives and goals within an organization. The Over Macro/Over Micro, Quadrant 1, contains attributes that reflect a tremendous amount of action and ongoing adjustments, typical of an organization undergoing significant changes in either leadership, program and/or structure. Over Macro/Under Micro, Quadrant 2, reflects planning characteristics found in large, bureaucratic systems with little regard given to the workings of their component parts. Under Macro/Under Micro, Quadrant 3, reflects the uncooperative, uncoordinated organization, one that contains a multiplicity of viewpoints, language, objectives and goals. Under Macro/Under Micro, Quadrant 4 represents the worst case scenario for any organization. The attributes of this quadrant are very reactive, chaotic, non-productive and redundant.^ There were three phases to the study: development of the initial instrument, pilot testing the initial instrument and item revision, and administration and assessment of the refined instrument. The survey instrument was found to be valid and reliable for the purposes and audiences herein described.^ In order to expand the applicability of the instrument to other organizational settings, the survey was administered to three professional colleges within a university.^ The first three specific research questions collectively answered, in the affirmative, the basic research question: Can the Micro/Macro Dynamic Planning Grid be applied to an organization through an organizational development tool? The first specific question: Can an instrument be constructed that applies the Micro/Macro Dynamic Planning Grid? The second specific research question: Is the constructed instrument valid and reliable? The third specific research question: Does an instrument that applies the Micro/Macro Dynamic Planning Grid assess congruency of micro and macro planning, goals and objectives within an organization? The fourth specific research question: What are the differences in the responses based on roles and responsibilities within an organization? involved statistical analysis of the response data and comparisons obtained with the demographic data. (Abstract shortened by UMI.) ^

Plasma and cold sprayed aluminum carbon nanotube composites: Quantification of nanotube distribution and multi-scale mechanical properties

Carbon nanotubes (CNT) could serve as potential reinforcement for metal matrix composites for improved mechanical properties. However dispersion of carbon nanotubes (CNT) in the matrix has been a longstanding problem, since they tend to form clusters to minimize their surface area. The aim of this study was to use plasma and cold spraying techniques to synthesize CNT reinforced aluminum composite with improved dispersion and to quantify the degree of CNT dispersion as it influences the mechanical properties. Novel method of spray drying was used to disperse CNTs in Al-12 wt.% Si prealloyed powder, which was used as feedstock for plasma and cold spraying. A new method for quantification of CNT distribution was developed. Two parameters for CNT dispersion quantification, namely Dispersion parameter (DP) and Clustering Parameter (CP) have been proposed based on the image analysis and distance between the centers of CNTs. Nanomechanical properties were correlated with the dispersion of CNTs in the microstructure. Coating microstructure evolution has been discussed in terms of splat formation, deformation and damage of CNTs and CNT/matrix interface. Effect of Si and CNT content on the reaction at CNT/matrix interface was thermodynamically and kinetically studied. A pseudo phase diagram was computed which predicts the interfacial carbide for reaction between CNT and Al-Si alloy at processing temperature. Kinetic aspects showed that Al4C3 forms with Al-12 wt.% Si alloy while SiC forms with Al-23wt.% Si alloy. Mechanical properties at nano, micro and macro-scale were evaluated using nanoindentation and nanoscratch, microindentation and bulk tensile testing respectively. Nano and micro-scale mechanical properties (elastic modulus, hardness and yield strength) displayed improvement whereas macro-scale mechanical properties were poor. The inversion of the mechanical properties at different scale length was attributed to the porosity, CNT clustering, CNT-splat adhesion and Al 4C3 formation at the CNT/matrix interface. The Dispersion parameter (DP) was more sensitive than Clustering parameter (CP) in measuring degree of CNT distribution in the matrix.

A study of the relationship between employee virtuality and technology deviance as mediated by leadership and employee perceptions

Recent studies found that organizations have been investing significant capital in developing teams and employees in geographic areas where labor and resources are considerably cheaper. Furthermore, organizations are moving core operational activities such as research and development and back-office processes to globally distributed teams. ^ However, several factors that are inherent to these virtual teams can have a negative impact on employee perceptions and engagement; specifically, the physical and temporal differences between employees and their supervisors, the lack of meaningful social interaction intrinsic to working relationships, and cultural biases that can be fostered when close, daily interactions is not there to help bridge the dissimilarity. ^ When strategies are not in place to mitigate these deficiencies, it can cause virtual employees to disengage emotionally and intellectually from the organization, or lead them to feel justified in working against the best interest of the company. ^ Past research indicates that although deviant behavior in the workplace is not new, transgressions committed by employees have been increasing significantly every year. Beyond the focus of why employees are motivated to act against the organization, to what extent do the recent changes to the organization’s structure influence this type of behavior through their actions at the macro (organizational) and micro level (leadership). ^ In addition, there is a related phenomenon that has aided the transformation of the workplace—namely, the ubiquity of technology. In the context of workplace deviance, established research has documented an increasing trend of employees utilizing company technology as a medium and amplifier when harming the organization. It is important to understand whether technology has facilitated or hindered workplace deviance by virtue of the technology itself (as a means), and as part of the new employee roles created by the evolving technology (i.e., virtual employees). Therefore, it is important to identify how individual attitudes and behaviors can be affected by an employee’s degree of virtuality. ^ This study will add to the understanding of how social interaction and physical proximity, leadership and other perception factors contribute to the changes organizations are experiencing as their structure evolves and adapts to compete in the new global environment. ^

Plasma And Cold Sprayed Aluminum Carbon Nanotube Composites: Quantification Of Nanotube Distribution And Multi-Scale Mechanical Properties

Carbon nanotubes (CNT) could serve as potential reinforcement for metal matrix composites for improved mechanical properties. However dispersion of carbon nanotubes (CNT) in the matrix has been a longstanding problem, since they tend to form clusters to minimize their surface area. The aim of this study was to use plasma and cold spraying techniques to synthesize CNT reinforced aluminum composite with improved dispersion and to quantify the degree of CNT dispersion as it influences the mechanical properties. Novel method of spray drying was used to disperse CNTs in Al-12 wt.% Si pre-alloyed powder, which was used as feedstock for plasma and cold spraying. A new method for quantification of CNT distribution was developed. Two parameters for CNT dispersion quantification, namely Dispersion parameter (DP) and Clustering Parameter (CP) have been proposed based on the image analysis and distance between the centers of CNTs. Nanomechanical properties were correlated with the dispersion of CNTs in the microstructure. Coating microstructure evolution has been discussed in terms of splat formation, deformation and damage of CNTs and CNT/matrix interface. Effect of Si and CNT content on the reaction at CNT/matrix interface was thermodynamically and kinetically studied. A pseudo phase diagram was computed which predicts the interfacial carbide for reaction between CNT and Al-Si alloy at processing temperature. Kinetic aspects showed that Al4C3 forms with Al-12 wt.% Si alloy while SiC forms with Al-23wt.% Si alloy. Mechanical properties at nano, micro and macro-scale were evaluated using nanoindentation and nanoscratch, microindentation and bulk tensile testing respectively. Nano and micro-scale mechanical properties (elastic modulus, hardness and yield strength) displayed improvement whereas macro-scale mechanical properties were poor. The inversion of the mechanical properties at different scale length was attributed to the porosity, CNT clustering, CNT-splat adhesion and Al4C3 formation at the CNT/matrix interface. The Dispersion parameter (DP) was more sensitive than Clustering parameter (CP) in measuring degree of CNT distribution in the matrix.

A Study of the Relationship between Employee Virtuality and Technology Deviance as Mediated by Leadership and Employee Perceptions

Recent studies found that organizations have been investing significant capital in developing teams and employees in geographic areas where labor and resources are considerably cheaper. Furthermore, organizations are moving core operational activities such as research and development and back-office processes to globally distributed teams. However, several factors that are inherent to these virtual teams can have a negative impact on employee perceptions and engagement; specifically, the physical and temporal differences between employees and their supervisors, the lack of meaningful social interaction intrinsic to working relationships, and cultural biases that can be fostered when close, daily interactions is not there to help bridge the dissimilarity. When strategies are not in place to mitigate these deficiencies, it can cause virtual employees to disengage emotionally and intellectually from the organization, or lead them to feel justified in working against the best interest of the company. Past research indicates that although deviant behavior in the workplace is not new, transgressions committed by employees have been increasing significantly every year. Beyond the focus of why employees are motivated to act against the organization, to what extent do the recent changes to the organization’s structure influence this type of behavior through their actions at the macro (organizational) and micro level (leadership). In addition, there is a related phenomenon that has aided the transformation of the workplace – namely, the ubiquity of technology. In the context of workplace deviance, established research has documented an increasing trend of employees utilizing company technology as a medium and amplifier when harming the organization. It is important to understand whether technology has facilitated or hindered workplace deviance by virtue of the technology itself (as a means), and as part of the new employee roles created by the evolving technology (i.e, virtual employees). Therefore, it is important to identify how individual attitudes and behaviors can be affected by an employee’s degree of virtuality. This study will add to the understanding of how social interaction and physical proximity, leadership and other perception factors contribute to the changes organizations are experiencing as their structure evolves and adapts to compete in the new global environment.

Multipurpose portable system for environmental, industrial, and medical applications

This dissertation is about the research carried on developing an MPS (Multipurpose Portable System) which consists of an instrument and many accessories. The instrument is portable, hand-held, and rechargeable battery operated, and it measures temperature, absorbance, and concentration of samples by using optical principles. The system also performs auxiliary functions like incubation and mixing. This system can be used in environmental, industrial, and medical applications. ^ Research emphasis is on system modularity, easy configuration, accuracy of measurements, power management schemes, reliability, low cost, computer interface, and networking. The instrument can send the data to a computer for data analysis and presentation, or to a printer. ^ This dissertation includes the presentation of a full working system. This involved integration of hardware and firmware for the micro-controller in assembly language, software in C and other application modules. ^ The instrument contains the Optics, Transimpedance Amplifiers, Voltage-to-Frequency Converters, LCD display, Lamp Driver, Battery Charger, Battery Manager, Timer, Interface Port, and Micro-controller. ^ The accessories are a Printer, Data Acquisition Adapter (to transfer the measurements to a computer via the Printer Port and expand the Analog/Digital conversion capability), Car Plug Adapter, and AC Transformer. This system has been fully evaluated for fault tolerance and the schemes will also be presented. ^

Ficcion de racionalidad: La memoria como operador mitico en las esteticas polares de Jorge Luis Borges y Jose Lezama Lima

The aesthetic placement and period designation of Jorge Luis Borges (1899–1986) and José Lezama Lima (1910–1976) are complicated issues among critics. Borges is considered a predecessor of the Latin American literary “boom,” but despite that taxonomy his work transcends that definition and provides a foundation for new trends, such as the “neobarroco” cultivated by Severo Sarduy. Lezama is considered part of the second wave of the “boom,” but his work feeds, stylistically, from the Spanish baroque. At the same time, Lezama's daring treatment of homoeroticism and his system of images place him after the “boom” in a narrative style that is postmodern. This study undertakes a revision of external and internal issues, revealing the key fictive elements that characterize both writers. Through discourse analysis, a poetic system is formulated, which incorporates features of the “neobarroco,” and postmodern narrative styles. ^ This dissertation uses a polar structure to analyze both poetic visions and finds that they are symmetrical. From this perspective, Borges and Lezama belong to the “core” of literature that centers its emphasis in the creation of a system versus other modes of writing in which mimetic function prevails. By doing this and by recycling world culture, they create postmodern myth: the new building material for Hispanic American literature. ^ There are a few studies that explore the works of Borges and Lezama within the context of Baroque aesthetics. This dissertation offers a comprehensive analysis that considers their poetic visions at large. Besides the difference in perspective, defined as macro-spatial in Borges and micro-spatial in Lezama, there are many similarities. Both writers question the cause and effect relationship and the use of metaphor. They share a redefinition of genre as well as a hedonistic approach to literature. This kinship in poetic vision is revealed through the polar method used for this study, which proposes a new form of aesthetic placement and period designation. ^

Lattice Boltzmann method for flow and heat transfer in microgeometries

Recent technological developments have made it possible to design various microdevices where fluid flow and heat transfer are involved. For the proper design of such systems, the governing physics needs to be investigated. Due to the difficulty to study complex geometries in micro scales using experimental techniques, computational tools are developed to analyze and simulate flow and heat transfer in microgeometries. However, conventional numerical methods using the Navier-Stokes equations fail to predict some aspects of microflows such as nonlinear pressure distribution, increase mass flow rate, slip flow and temperature jump at the solid boundaries. This necessitates the development of new computational methods which depend on the kinetic theory that are both accurate and computationally efficient. In this study, lattice Boltzmann method (LBM) was used to investigate the flow and heat transfer in micro sized geometries. The LBM depends on the Boltzmann equation which is valid in the whole rarefaction regime that can be observed in micro flows. Results were obtained for isothermal channel flows at Knudsen numbers higher than 0.01 at different pressure ratios. LBM solutions for micro-Couette and micro-Poiseuille flow were found to be in good agreement with the analytical solutions valid in the slip flow regime (0.01 < Kn < 0.1) and direct simulation Monte Carlo solutions that are valid in the transition regime (0.1 < Kn < 10) for pressure distribution and velocity field. The isothermal LBM was further extended to simulate flows including heat transfer. The method was first validated for continuum channel flows with and without constrictions by comparing the thermal LBM results against accurate solutions obtained from analytical equations and finite element method. Finally, the capability of thermal LBM was improved by adding the effect of rarefaction and the method was used to analyze the behavior of gas flow in microchannels. The major finding of this research is that, the newly developed particle-based method described here can be used as an alternative numerical tool in order to study non-continuum effects observed in micro-electro-mechanical-systems (MEMS).

Florida Bay: Water quality status and trends, historic and emerging algal bloom problems

Florida Bay is a unique subtropical estuary that while historically oligotrophic, has been subjected to both natural and anthropogenic stressors, including hurricanes, coastal eutrophication and other impacts. These stressors have resulted in degradation of water quality in the past several decades, most evidenced by reoccurring blooms of the picocyanobacterium Synechococcus spp. Major nutrient inputs consist of freshwater flows to the eastern region from runoff and regulated canal releases, inputs from the Everglades to the central region via Taylor Slough, exchanges with the Gulf of Mexico, which include intermittent Shark River inputs to the western region, stormwater and wastewater from the Florida Keys, and atmospheric deposition. These nutrient inputs have resulted in a transition from strong phosphorus (P) limitation of phytoplankton in the eastern bay to nitrogen (N) limitation in the western bay. Large blooms of Synechococcus were most pronounced in the central bay region, in the area of transition between P and N limitation, in the mid-1990s. Although non-toxic, these blooms, which have continued intermittently through the early 2000s, resulted in significant sea-grass and benthic organism mortalities. A new suite of stressors in 2005, including the passages of Hurricanes Katrina, Rita, and Wilma, additional canal releases, and the initiation of road construction to widen the main roadway leading to the Keys, were correlated with a large Synechococcus bloom in the previously clear, strongly P- limited, northeastern region of the bay. Sustained for 3 years, this bloom was accompanied by a shift from P limitation to N limitation during its course. Nutrient bioassay experiments suggest that this bloom persisted due to the ability of Synechococcus to access organic N and P sources, microbial and geochemical cycling of organic and inorganic nutrients in the water column and between the water column and sediments (both suspended particles and benthos), and decreased grazing by benthic fauna due to their die-off.

Ecosystem structure in disturbed and restored subtropical seagrass meadows

Shallow seagrass ecosystems frequently experience physical disturbance from vessel groundings. Specific restoration methods that modify physical, chemical, and biological aspects of disturbances are used to accelerate recovery. This study evaluated loss and recovery of ecosystem structure in disturbed seagrass meadows through plant and soil properties used as proxies for primary and secondary production, habitat quality, benthic metabolism, remineralization, and nutrient storage and exchange. The efficacy of common seagrass restoration techniques in accelerating recovery was also assessed. Beyond removal of macrophyte biomass, disturbance to seagrass sediments resulted in loss of organic matter and stored nutrients, and altered microbial and infaunal communities. Evidence of the effectiveness of restoration actions was variable. Fill placement prevented additional erosion, but the resulting sediment matrix had different physical properties, low organic matter content and nutrient pools, reduced benthic metabolism, and less primary and secondary production relative to the undisturbed ecosystem. Fertilization was effective in increasing nitrogen and phosphorus availability in the sediments, but concurrent enhancement of seagrass production was not detected. Seagrass herbivores removed substantial seagrass biomass via direct grazing, suggesting that leaf loss to seagrass herbivores is a spatially variable but critically important determinant of seagrass transplanting success. Convergence of plant and sediment response variables with levels in undisturbed seagrass meadows was not detected via natural recovery of disturbed sites, or through filling and fertilizing restoration sites. However, several indicators of ecosystem development related to primary production and nutrient accumulation suggest that early stages of ecosystem development have begun at these sites. This research suggests that vessel grounding disturbances in seagrass ecosystems create more complex and persistent resource losses than previously understood by resource managers. While the mechanics of implementing common seagrass restoration actions have been successfully developed by the restoration community, expectations of consistent or rapid recovery trajectories following restoration remain elusive.

Site specific growth of metal catalyzed silica nanowires for biological and chemical sensing

In this research the integration of nanostructures and micro-scale devices was investigated using silica nanowires to develop a simple yet robust nanomanufacturing technique for improving the detection parameters of chemical and biological sensors. This has been achieved with the use of a dielectric barrier layer, to restrict nanowire growth to site-specific locations which has removed the need for post growth processing, by making it possible to place nanostructures on pre-pattern substrates. Nanowires were synthesized using the Vapor-Liquid-Solid growth method. Process parameters (temperature and time) and manufacturing aspects (structural integrity and biocompatibility) were investigated. Silica nanowires were observed experimentally to determine how their physical and chemical properties could be tuned for integration into existing sensing structures. Growth kinetic experiments performed using gold and palladium catalysts at 1050°C for 60 minutes in an open-tube furnace yielded dense and consistent silica nanowire growth. This consistent growth led to the development of growth model fitting, through use of the Maximum Likelihood Estimation (MLE) and Bayesian hierarchical modeling. Transmission electron microscopy studies revealed the nanowires to be amorphous and X-ray diffraction confirmed the composition to be SiO2 . Silica nanowires were monitored in epithelial breast cancer media using Impedance spectroscopy, to test biocompatibility, due to potential in vivo use as a diagnostic aid. It was found that palladium catalyzed silica nanowires were toxic to breast cancer cells, however, nanowires were inert at 1μg/mL concentrations. Additionally a method for direct nanowire integration was developed that allowed for silica nanowires to be grown directly into interdigitated sensing structures. This technique eliminates the need for physical nanowire transfer thus preserving nanowire structure and performance integrity and further reduces fabrication cost. Successful nanowire integration was physically verified using Scanning electron microscopy and confirmed electrically using Electrochemical Impedance Spectroscopy of immobilized Prostate Specific Antigens (PSA). The experiments performed above serve as a guideline to addressing the metallurgic challenges in nanoscale integration of materials with varying composition and to understanding the effects of nanomaterials on biological structures that come in contact with the human body.