High pressure and low temperature study of ammonia borane and lithium amidoborane

Hydrogen has been considered as a potentially efficient and environmentally friendly alternative energy solution. However, one of the most important scientific and technical challenges that the "hydrogen economy" faces is the development of safe and economically viable on-board hydrogen storage for fuel cell applications, especially to the transportation sector. Ammonia borane (BH3NH 3), a solid state hydrogen storage material, possesses exceptionally high hydrogen content (19.6 wt%).However, a fairly high temperature is required to release all the hydrogen atoms, along with the emission of toxic borazine. Recently research interests are focusing on the improvement of H2 discharge from ammonia borane (AB) including lowering the dehydrogenation temperature and enhancing hydrogen release rate using different techniques. Till now the detailed information about the bonding characteristics of AB is not sufficient to understand details about its phases and structures. ^ Elemental substitution of ammonia borane produces metal amidoboranes. Introduction of metal atoms to the ammonia borane structure may alter the bonding characteristics. Lithium amidoborane is synthesized by ball milling of ammonia borane and lithium hydride. High pressure study of molecular crystal provides unique insight into the intermolecular bonding forces and phase stability. During this dissertation, Raman spectroscopic study of lithium amidoborane has been carried out at high pressure in a diamond anvil cell. It has been identified that there is no dihydrogen bond in the lithium amidoborane structure, whereas dihydrogen bond is the characteristic bond of the parent compound ammonia borane. It has also been identified that the B-H bond becomes weaker, whereas B-N and N-H bonds become stronger than those in the parent compound ammonia borane. At high pressure up to 15 GPa, Raman spectroscopic study indicates two phase transformations of lithium amidoborane, whereas synchrotron X-ray diffraction data indicates only one phase transformation of this material. ^ Pressure and temperature has a significant effect on the structural stability of ammonia borane. This dissertation explored the phase transformation behavior of ammonia borane at high pressure and low temperature using in situ Raman spectroscopy. The P-T phase boundary between the tetragonal (I4mm) and orthorhombic (Pmn21) phases of ammonia borane has been determined. The transition has a positive Clapeyron slope which indicates the transition is of exothermic in nature. Influence of nanoconfinemment on the I4mm to Pmn2 1 phase transition of ammonia borane was also investigated. Mesoporus silica scaffolds SBA-15 with pore size of ~8 nm and MCM-41 with pore size of 2.1-2.7 nm, were used to nanoconfine ammonia borane. During cooling down, the I4mm to Pmn21 phase transition was not observed in MCM-41 nanoconfined ammonia borane, whereas the SBA-15 nanocondfined ammonia borane shows the phase transition at ~195 K. Four new phases of ammonia borane were also identified at high pressure up to 15 GPa and low temperature down to 90 K.^

High Pressure and Low Temperature Study of Ammonia Borane and Lithium Amidoborane

Hydrogen has been considered as a potentially efficient and environmentally friendly alternative energy solution. However, one of the most important scientific and technical challenges that the “hydrogen economy” faces is the development of safe and economically viable on-board hydrogen storage for fuel cell applications, especially to the transportation sector. Ammonia borane (BH3NH3), a solid state hydrogen storage material, possesses exceptionally high hydrogen content (19.6 wt%).However, a fairly high temperature is required to release all the hydrogen atoms, along with the emission of toxic borazine. Recently research interests are focusing on the improvement of H2 discharge from ammonia borane (AB) including lowering the dehydrogenation temperature and enhancing hydrogen release rate using different techniques. Till now the detailed information about the bonding characteristics of AB is not sufficient to understand details about its phases and structures. Elemental substitution of ammonia borane produces metal amidoboranes. Introduction of metal atoms to the ammonia borane structure may alter the bonding characteristics. Lithium amidoborane is synthesized by ball milling of ammonia borane and lithium hydride. High pressure study of molecular crystal provides unique insight into the intermolecular bonding forces and phase stability. During this dissertation, Raman spectroscopic study of lithium amidoborane has been carried out at high pressure in a diamond anvil cell. It has been identified that there is no dihydrogen bond in the lithium amidoborane structure, whereas dihydrogen bond is the characteristic bond of the parent compound ammonia borane. It has also been identified that the B-H bond becomes weaker, whereas B-N and N-H bonds become stronger than those in the parent compound ammonia borane. At high pressure up to 15 GPa, Raman spectroscopic study indicates two phase transformations of lithium amidoborane, whereas synchrotron X-ray diffraction data indicates only one phase transformation of this material. Pressure and temperature has a significant effect on the structural stability of ammonia borane. This dissertation explored the phase transformation behavior of ammonia borane at high pressure and low temperature using in situ Raman spectroscopy. The P-T phase boundary between the tetragonal (I4mm) and orthorhombic (Pmn21) phases of ammonia borane has been determined. The transition has a positive Clapeyron slope which indicates the transition is of exothermic in nature. Influence of nanoconfinemment on the I4mm to Pmn21 phase transition of ammonia borane was also investigated. Mesoporus silica scaffolds SBA-15 with pore size of ~8 nm and MCM-41 with pore size of 2.1-2.7 nm, were used to nanoconfine ammonia borane. During cooling down, the I4mm to Pmn21 phase transition was not observed in MCM-41 nanoconfined ammonia borane, whereas the SBA-15 nanocondfined ammonia borane shows the phase transition at ~195 K. Four new phases of ammonia borane were also identified at high pressure up to 15 GPa and low temperature down to 90 K.

Crack tip stress study for elastic-perfectly plastic materials with some applications

The problems of plasticity and non-linear fracture mechanics have been generally recognized as the most difficult problems of solid mechanics. The present dissertation is devoted to some problems on the intersection of both plasticity and non-linear fracture mechanics. The crack tip is responsible for the crack growth and therefore is the focus of fracture science. The problem of crack has been studied by an army of outstanding scholars and engineers in this century, but has not, as yet, been solved for many important practical situations. The aim of this investigation is to provide an analytical solution to the problem of plasticity at the crack tip for elastic-perfectly plastic materials and to apply the solution to a classical problem of the mechanics of composite materials.^ In this work, the stresses inside the plastic region near the crack tip in a composite material made of two different elastic-perfectly plastic materials are studied. The problems of an interface crack, a crack impinging an interface at the right angle and at arbitrary angles are examined. The constituent materials are assumed to obey the Huber-Mises yielding condition criterion. The theory of slip lines for plane strain is utilized. For the particular homogeneous case these problems have two solutions: the continuous solution found earlier by Prandtl and modified by Hill and Sokolovsky, and the discontinuous solution found later by Cherepanov. The same type of solutions were discovered in the inhomogeneous problems of the present study. Some reasons to prefer the discontinuous solution are provided. The method is also applied to the analysis of a contact problem and a push-in/pull-out problem to determine the critical load for plasticity in these classical problems of the mechanics of composite materials.^ The results of this dissertation published in three journal articles (two of which are under revision) will also be presented in the Invited Lecture at the 7$\rm\sp{th}$ International Conference on Plasticity (Cancun, Mexico, January 1999). ^

Medical School Donor Recognition Reception Photo 41

http://digitalcommons.fiu.edu/com_images/1046/thumbnail.jpg

Quality of life and application of the transtheoretical model to diabetes self -management behaviors in older adults with type 2 diabetes

One in five adults 65 years and older has diabetes. Coping with diabetes is a lifelong task, and much of the responsibility for managing the disease falls upon the individual. Reports of non-adherence to recommended treatments are high. Understanding the additive impact of diabetes on quality of life issues is important. The purpose of this study was to investigate the quality of life and diabetes self-management behaviors in ethnically diverse older adults with type 2 diabetes. The SF-12v2 was used to measure physical and mental health quality of life. Scores were compared to general, age sub-groups, and diabetes-specific norms. The Transtheoretical Model (TTM) was applied to assess perceived versus actual behavior for three diabetes self-management tasks: dietary management, medication management, and blood glucose self-monitoring. Dietary intake and hemoglobin A1c values were measured as outcome variables. Utilizing a cross-sectional research design, participants were recruited from Elderly Nutrition Program congregate meal sites (n = 148, mean age 75). ^ Results showed that mean scores of the SF-12v2 were significantly lower in the study sample than the general norms for physical health (p < .001), mental health (p < .01), age sub-group norms (p < .05), and diabetes-specific norms for physical health (p < .001). A multiple regression analysis found that adherence to an exercise plan was significantly associated with better physical health (p < .001). Transtheoretical Model multiple regression analyses explained 68% of the variance for % Kcal from fat, 41% for fiber, 70% for % Kcal from carbohydrate, and 7% for hemoglobin A 1c values. Significant associations were found between TTM stage of change and dietary fiber intake (p < .01). Other significant associations related to diet included gender (p < .01), ethnicity (p < .05), employment (p < .05), type of insurance (p < .05), adherence to an exercise plan (p < .05), number of doctor visits/year ( p < .01), and physical health (p < .05). Significant associations were found between hemoglobin A1c values and age ( p < .05), being non-Hispanic Black (p < .01), income (p < .01), and eye problems (p < .05). ^ The study highlights the importance of the beneficial effects of exercise on quality of life issues. Furthermore, application of the Transtheoretical Model in conjunction with an assessment of dietary intake may be valuable in helping individuals make lifestyle changes. ^

Perceived Stress and Self‑rated Health of Haitian and African Americans with and without Type 2 Diabetes

Background: Blacks have a higher incidence of diabetes and its related complications. Self-rated health (SRH) and perceived stress indicators are associated with chronic diseases. The aim of this study was to examine the associations between SRH, perceived stress and diabetes status among two Black ethnicities. Materials and Methods: The cross-sectional study included 258 Haitian Americans and 249 African Americans with (n = 240) and without type 2 diabetes (n = 267) (N = 507). Recruitment was performed by community outreach. Results: Haitian-Americans were less likely to report ‘fair to poor’ health as compared to African Americans [OR=0.58 (95% CI: 0.35, 0.95), P = 0.032]; yet, Haitian Americans had greater perceived stress than African Americans (P = 0.002). Having diabetes was associated with ‘fair to poor’ SRH [OR=3.14 (95% CI: 2.09, 4.72),P < 0.001] but not perceived stress (P = 0.072). Haitian-Americans (P = 0.023), females (P = 0.003) and those participants having ‘poor or fair’ SRH (P < 0.001) were positively associated with perceived stress (Nagelkerke R2=0.151). Conclusion: Perceived stress associated with ‘poor or fair’ SRH suggests that screening for perceived stress should be considered part of routine medical care; albeit, further studies are required to confirm our results. The findings support the need for treatment plans that are patient-centered and culturally relevant and that address psychosocial issues.