A mixed method study of organizational culture dimensions of community college faculty library use and perceptions

Because past research has shown faculty as the driving force affecting student academic library use, librarians have tried for decades to engage classroom faculty in library activities. Nevertheless, a low rate of library use by faculty on behalf of their students persists. This study investigated the organizational culture dimensions affecting library faculty demand at a community college. The study employed a sequential quantitative-qualitative research design. A random sample of full-time faculty at a large urban community college responded to a 46-item survey. The survey data showed strong espoused support (84%) for the use of library-based materials but a much lower incidence of putting this construct into practice (46%). Interviews were conducted with 11 full-time faculty from two academic groups, English-Humanities and Engineering-Math-Science. These groups were selected because the survey data resulted in statistically significant differences between the groups pertaining to several key variables. These variables concerned the professors' perceptions of the importance of library research in their discipline, the amount of time spent on the course textbook during a term, the frequency of conversations about the library in the academic department, and the professors' ratings of the librarians' skill in instruction related to the academic discipline. All interviewees described the student culture as the predominant organizational culture at Major College. Although most interview subjects held to high information literacy standards in their courses, others were less convinced these could be realistically practiced, based on a perception of students' poor academic skills, lack of time for students to complete assignments due to their commuter and family responsibilities, and the need to focus on textbook content. Recommended future research would involve investigation of methods to bridge the gap between high espoused value toward information literacy and implementation of information-literate coursework.

A View of Faculty Library Use and Perception From an Organizational Culture Lens

This study investigated faculty library demand from an organizational culture perspective at one college where annual requests for library instruction are received from a mere six percent of faculty. Analysis of survey data revealed a statistically significant difference in academic discipline assignment of library research, with the English-Humanities faculty group far exceeding all other faculty groups including the Social Sciences.

FIU Medical Library Stacks and Computers

http://digitalcommons.fiu.edu/com_images/1101/thumbnail.jpg

FIU Medical Library Stacks and Study Table

http://digitalcommons.fiu.edu/com_images/1091/thumbnail.jpg

Profile of planning: A study of a three-year project on the implementation of collaborative library media programs

The implementation of collaborative planning and teaching models in ten flexibly scheduled elementary and middle school library media centers was studied to determine which factors facilitated the collaborative planning process and to learn what occurs when library media specialists (LMSs) and classroom teachers (CTs) plan together. In this qualitative study, 61 principals, CTs, and LMSs were interviewed on a range of topics including the principal's role, school climate, the value of team planning, the importance of information literacy instruction, and the ideal learning environment. Other data sources were observations, videotapes of planning sessions, and documents. This three-year school reform effort was funded by the Library Power Project to improve library programs, to encourage collaborative planning, and to increase curricular integration of information literacy skills instruction. ^ The findings included a description of typical planning sessions and the identification of several major factors which impacted the success of collaborative planning: the individuals involved, school climate, time for planning, the organization of the school, the facility and collection, and training. Of these factors, the characteristics and actions of the people involved were most critical to the implementation of the innovation. The LMS was the pivotal player and, in the views of CTs, principals, and LMSs themselves, must be knowledgeable about curriculum, the library collection, and instructional design and delivery; must be open and welcoming to CTs and use good interpersonal skills; and must be committed to information literacy instruction and willing to act as a change agent. The support of the principal was vital; in schools with successful programs, the principal served as an advocate for collaborative planning and information literacy instruction, provided financial support for the library program including clerical staff, and arranged for LMSs and CTs to have time during the school day to plan together. ^ CTs involved in positive planning partnerships with LMSs were flexible, were open to change, used a variety of instructional materials, expected students to be actively involved in their own learning, and were willing to team teach with LMSs. Most CTs planning with LMSs made lesson plans in advance and preferred to plan with others. Also, most CTs in this study planned with grade level or departmental groups, which expedited the delivery of information literacy instruction and the effective use of planning time. ^ Implications of the findings of this research project were discussed for individual schools, for school districts, and for colleges and universities training LMSs, CTs, and administrators. Suggestions for additional research were also included. ^

Financial aid and the persistence of associate of arts graduates transferring to a senior university

This study examined the effects of financial aid on the persistence of associate of arts graduates transferring to a senior university in one of four consecutive fall semesters (1998-2001). Situated in an international metropolitan area in the southeastern United States, the institution where the study was conducted is a large public research university identified as a Hispanic Serving Institution. Archival databases served as the source of information on the academic and social background of the 4,669 participants in the study. Data from institutional financial aid records were pooled with the data in the student administrative system.^ For purposes of this study, persistence was defined as ongoing progress until completing the baccalaureate degree. Student social background variables used in the study were gender, ethnicity, age, and income, with GPA and part-time or full-time enrollment status being the academic variables. Amount and type of aid, including grants, loans, scholarships, and work study were incorporated in the models to determine the effect of financial aid on the persistence of these transfer students. Because the dependent variable persistence had three possible outcomes (graduated, still enrolled, dropped out) multinomial logistic regression was the appropriate technique for analyzing the data; four multinomial models were employed in the analysis.^ Findings suggest that grants awarded based on the financial need of students and loans were effective in encouraging the persistence of students, but scholarships and work study were not effective.^

Analytical approximations to predict performance measures of manufacturing systems with job failures and parallel processing

Parallel processing is prevalent in many manufacturing and service systems. Many manufactured products are built and assembled from several components fabricated in parallel lines. An example of this manufacturing system configuration is observed at a manufacturing facility equipped to assemble and test web servers. Characteristics of a typical web server assembly line are: multiple products, job circulation, and paralleling processing. The primary objective of this research was to develop analytical approximations to predict performance measures of manufacturing systems with job failures and parallel processing. The analytical formulations extend previous queueing models used in assembly manufacturing systems in that they can handle serial and different configurations of paralleling processing with multiple product classes, and job circulation due to random part failures. In addition, appropriate correction terms via regression analysis were added to the approximations in order to minimize the gap in the error between the analytical approximation and the simulation models. Markovian and general type manufacturing systems, with multiple product classes, job circulation due to failures, and fork and join systems to model parallel processing were studied. In the Markovian and general case, the approximations without correction terms performed quite well for one and two product problem instances. However, it was observed that the flow time error increased as the number of products and net traffic intensity increased. Therefore, correction terms for single and fork-join stations were developed via regression analysis to deal with more than two products. The numerical comparisons showed that the approximations perform remarkably well when the corrections factors were used in the approximations. In general, the average flow time error was reduced from 38.19% to 5.59% in the Markovian case, and from 26.39% to 7.23% in the general case. All the equations stated in the analytical formulations were implemented as a set of Matlab scripts. By using this set, operations managers of web server assembly lines, manufacturing or other service systems with similar characteristics can estimate different system performance measures, and make judicious decisions - especially setting delivery due dates, capacity planning, and bottleneck mitigation, among others.

Correspondence of historic salinity fluctuations in Florida Bay, USA, to atmospheric variability and anthropogenic changes

Florida Bay is a highly dynamic estuary that exhibits wide natural fluctuations in salinity due to changes in the balance of precipitation, evaporation and freshwater runoff from the mainland. Rapid and large-scale modification of freshwater flow and construction of transportation conduits throughout the Florida Keys during the late nineteenth and twentieth centuries reshaped water circulation and salinity patterns across the ecosystem. In order to determine long-term patterns in salinity variation across the Florida Bay estuary, we used a diatom-based salinity transfer function to infer salinity within 3.27 ppt root mean square error of prediction from diatom assemblages from four ~130 year old sediment records. Sites were distributed along a gradient of exposure to anthropogenic shifts in the watershed and salinity. Precipitation was found to be the primary driver influencing salinity fluctuations over the entire record, but watershed modifications on the mainland and in the Florida Keys during the late-1800s and 1900s were the most likely cause of significant shifts in baseline salinity. The timing of these shifts in the salinity baseline varies across the Bay: that of the northeastern coring location coincides with the construction of the Florida Overseas Railway (AD 1906–1916), while that of the east-central coring location coincides with the drainage of Lake Okeechobee (AD 1881–1894). Subsequent decreases occurring after the 1960s (east-central region) and early 1980s (southwestern region) correspond to increases in freshwater delivered through water control structures in the 1950s–1970s and again in the 1980s. Concomitant increases in salinity in the northeastern and south-central regions of the Bay in the mid-1960s correspond to an extensive drought period and the occurrence of three major hurricanes, while the drop in the early 1970s could not be related to any natural event. This paper provides information about major factors influencing salinity conditions in Florida Bay in the past and quantitative estimates of the pre- and post-South Florida watershed modification salinity levels in different regions of the Bay. This information should be useful for environmental managers in setting restoration goals for the marine ecosystems in South Florida, especially for Florida Bay.

From the Grassroot to the Tree Tops: How One Library has become Embedded in Online Learning

This presentation will show how a grassroots initiative has budded into the Florida International University (FIU) Libraries being an instrumental part of online learning. It will describe some of the marketing and outreach efforts that have been successful and share ideas on how to build alliances and networks with online faculty and students. Along with outreach efforts, the presentation will demonstrate some of the successful tools used to meet the needs of online students. Some of the these tools include becoming embedded in courses, building course and program specific Libguides, using Adobe Connect to reach students, creating simple YouTube videos, and creating more professional videos with FIU Online. The presentation will conclude with sharing some tips on how to keep the workload manageable when distance-learning programs are growing at the same time as library budgets and resources are shrinking.

Analytical Approximations to Predict Performance Measures of Manufacturing Systems with Job Failures and Parallel Processing

Parallel processing is prevalent in many manufacturing and service systems. Many manufactured products are built and assembled from several components fabricated in parallel lines. An example of this manufacturing system configuration is observed at a manufacturing facility equipped to assemble and test web servers. Characteristics of a typical web server assembly line are: multiple products, job circulation, and paralleling processing. The primary objective of this research was to develop analytical approximations to predict performance measures of manufacturing systems with job failures and parallel processing. The analytical formulations extend previous queueing models used in assembly manufacturing systems in that they can handle serial and different configurations of paralleling processing with multiple product classes, and job circulation due to random part failures. In addition, appropriate correction terms via regression analysis were added to the approximations in order to minimize the gap in the error between the analytical approximation and the simulation models. Markovian and general type manufacturing systems, with multiple product classes, job circulation due to failures, and fork and join systems to model parallel processing were studied. In the Markovian and general case, the approximations without correction terms performed quite well for one and two product problem instances. However, it was observed that the flow time error increased as the number of products and net traffic intensity increased. Therefore, correction terms for single and fork-join stations were developed via regression analysis to deal with more than two products. The numerical comparisons showed that the approximations perform remarkably well when the corrections factors were used in the approximations. In general, the average flow time error was reduced from 38.19% to 5.59% in the Markovian case, and from 26.39% to 7.23% in the general case. All the equations stated in the analytical formulations were implemented as a set of Matlab scripts. By using this set, operations managers of web server assembly lines, manufacturing or other service systems with similar characteristics can estimate different system performance measures, and make judicious decisions - especially setting delivery due dates, capacity planning, and bottleneck mitigation, among others.