Reliability analysis of encapsulation methods for lead -based paint through an accelerated life testing

The adverse health effects of long-term exposure to lead are well established, with major uptake into the human body occurring mainly through oral ingestion by young children. Lead-based paint was frequently used in homes built before 1978, particularly in inner-city areas. Minority populations experience the effects of lead poisoning disproportionately. ^ Lead-based paint abatement is costly. In the United States, residents of about 400,000 homes, occupied by 900,000 young children, lack the means to correct lead-based paint hazards. The magnitude of this problem demands research on affordable methods of hazard control. One method is encapsulation, defined as any covering or coating that acts as a permanent barrier between the lead-based paint surface and the environment. ^ Two encapsulants were tested for reliability and effective life span through an accelerated lifetime experiment that applied stresses exceeding those encountered under normal use conditions. The resulting time-to-failure data were used to extrapolate the failure time under conditions of normal use. Statistical analysis and models of the test data allow forecasting of long-term reliability relative to the 20-year encapsulation requirement. Typical housing material specimens simulating walls and doors coated with lead-based paint were overstressed before encapsulation. A second, un-aged set was also tested. Specimens were monitored after the stress test with a surface chemical testing pad to identify the presence of lead breaking through the encapsulant. ^ Graphical analysis proposed by Shapiro and Meeker and the general log-linear model developed by Cox were used to obtain results. Findings for the 80% reliability time to failure varied, with close to 21 years of life under normal use conditions for encapsulant A. The application of product A on the aged gypsum and aged wood substrates yielded slightly lower times. Encapsulant B had an 80% reliable life of 19.78 years. ^ This study reveals that encapsulation technologies can offer safe and effective control of lead-based paint hazards and may be less expensive than other options. The U.S. Department of Health and Human Services and the CDC are committed to eliminating childhood lead poisoning by 2010. This ambitious target is feasible, provided there is an efficient application of innovative technology, a goal to which this study aims to contribute. ^

Environmental lead contamination in Miami inner-city area

The purpose of the study was to evaluate the magnitude of environmental lead contamination in the downtown area of Miami. Lead inspections took place at 121 homes in Little Haiti and Liberty City and involved the collection ofrepresentative samples from floors, window wells, tap water, soil and air. Community health workers (CHWs) trained in interview and safety techniques went from door to door to enlist participation. On-site investigations were tailored to areas most utilized by children underthe age of6 years. The presence of lead-containing paint was also investigated in situ via X-ray fluorescence (XRF) analysis. Results: Of the sampling areas, the window wells area had the most abundant occurrence of lead. On analysis, 24% of sites returned window well samples with lead levels above Department of Housing and Urban Development (HUD) guidelines. Of the soil samples, the playgrounds around the house had the highest concentration of lead. Soil sampling demonstrated that 27.5% of sites returned samples with lead levels (400 to 1600 ppm) inexcess of HUD/Environmental Protection Agency (EPA) standards. Positive XRF readings in one or more components were returned by 18% of sites. Conclusions: More than half of the houses in these two neighborhoods exhibited unacceptably high levels of lead dust and soil in areas where children live and play. Limitations of this study did not allow the assessment of how many children in this area are affected. A more comprehensive study including other areas of Miami-Dade County with older housing stock is recommended.

Blood Lead Levels in Children and Environmental Lead Contamination in Miami Inner City, Florida

Studies have shown that the environmental conditions of the home are important predictors of health, especially in low-income communities. Understanding the relationship between the environment and health is crucial in the management of certain diseases. One health outcome related to the home environment among urban, minority, and low-income children is childhood lead poisoning. The most common sources of lead exposure for children are lead paint in older, dilapidated housing and contaminated dust and soil produced by accumulated residue of leaded gasoline. Blood lead levels (BLL) as low as 10 μg/dL in children are associated with impaired cognitive function, behavior difficulties, and reduced intelligence. Recently, it is suggested that the standard for intervention be lowered to BLL of 5 μg /dl. The objectives of our report were to assess the prevalence of lead poisoning among children under six years of age and to quantify and test the correlations between BLL in children and lead exposure levels in their environment. This cross-sectional analysis was restricted to 75 children under six years of age who lived in 6 zip code areas of inner city Miami. These locations exhibited unacceptably high levels of lead dust and soil in areas where children live and play. Using the 5 μg/dL as the cutoff point, the prevalence of lead poisoning among the study sample was 13.33%. The study revealed that lead levels in floor dust and window sill samples were positively and significantly correlated with BLL among children (p < 0.05). However, the correlations between BLL and the soil, air, and water samples were not significant. Based on this pilot study, a more comprehensive environmental study in surrounding inner city areas is warranted. Parental education on proper housecleaning techniques may also benefit those living in the high lead-exposed communities of inner city Miami.

The effects of a family-based educational intervention on the prevention of lead poisoning in children

The effects of lead exposure may endure through one's lifetime and can negatively effect educational performance. While the link between the cause and effects of lead poisoning has been identified, the application of lead health education as the mechanism of disease prevention has not. The purpose of this study was to examine whether caregiver participation in a family-based educational intervention can result in decreased lead exposure in low socioeconomic children. ^ Participants (n = 50) were caregivers of children 12 to 36 months of age. They were randomly selected from an urban clinic and randomly assigned to either a treatment or control group. The experimental design of this study involved two clinic visits. Parents in the treatment group were given the educational intervention during the first clinic visit while those in the control group were given the intervention during the second clinic visit. The intervention was reinforced with a lead education brochure coupled with a video on childhood lead poisoning. One instrument was used to test parental knowledge of lead poisoning both pre- and post-intervention. Blood lead levels in pediatric participants were tested using two blood lead screens approximately three to four months apart determined by well-child check-up schedules. ^ Findings from the analysis of variance showed the interaction between the change in blood lead level between the children's first and second clinic visits and the treatment level. This demonstrated a significant interaction between the differences of first and second clinic visits blood lead levels and the presence or absence of the educational intervention. ^ The findings from an analysis of covariance support that caregivers in the treatment group have significantly higher scores on the second clinic visit scores on the CLKT than the caregivers in the control group. These data suggest that the educational treatment is effective in increasing the knowledge of caregivers about the dangers of lead poisoning and the strategies for lead poisoning prevention. ^ Conclusions indicate that the education of adult caregivers can affect blood lead levels of children, the educational treatment increased the knowledge of caregivers, caregivers were able to carry out procedures taught, and caregivers retained knowledge over time. ^

Development of risk based treatability and engineering measures for reducing exposure to lead contaminated media in the Miami inner city, Florida

A major consequence of contamination at the local level’s population as it relates to environmental health and environmental engineering is childhood lead poisoning. Environmental contamination is one of the pressing environmental concerns facing the world today. Current approaches often focus on large contaminated industrial size sites that are designated by regulatory agencies for site remediation. Prior to this study, there were no known published studies conducted at the local and smaller scale, such as neighborhoods, where often much of the contamination is present to remediate. An environmental health study of local lead-poisoning data in Liberty City, Little Haiti and eastern Little Havana in Miami-Dade County, Florida accounted for a disproportionately high number of the county’s reported childhood lead poisoning cases. An engineering system was developed and designed for a comprehensive risk management methodology that is distinctively applicable to the geographical and environmental conditions of Miami-Dade County, Florida. Furthermore, a scientific approach for interpreting environmental health concerns, while involving detailed environmental engineering control measures and methods for site remediation in contained media was developed for implementation. Test samples were obtained from residents and sites in those specific communities in Miami-Dade County, Florida (Gasana and Chamorro 2002). Currently lead does not have an Oral Assessment, Inhalation Assessment, and Oral Slope Factor; variables that are required to run a quantitative risk assessment. However, various institutional controls from federal agencies’ standards and regulation for contaminated lead in media yield adequate maximum concentration limits (MCLs). For this study an MCL of .0015 (mg/L) was used. A risk management approach concerning contaminated media involving lead demonstrates that the linkage of environmental health and environmental engineering can yield a feasible solution.

How do partnerships lead to a competitive advantage? Applying the resource based view to nascent social ventures

This dissertation is one of the earliest to systematically apply and empirically test the resource-based view (RBV) in the context of nascent social ventures in a large scale study. Social ventures are entrepreneurial ventures organized as nonprofit, for-profit, or hybrid organizations whose primary purpose is to address unmet social needs and create social value. Nascent social ventures face resource gaps and engage in partnerships or alliances as one means to access external resources. These partnerships with different sectors facilitate social venture innovative and earned income strategies, and assist in the development of adequate heterogeneous resource conditions that impact competitive advantage. Competitive advantage in the context of nascent social ventures is achieved through the creation of value and the achievement of venture development activities and launching. The relationships between partnerships, heterogeneous resource conditions, strategies, and competitive advantage are analyzed in the context of nascent social ventures that participated in business plan competitions. A content analysis of 179 social venture business plans and an exploratory follow-up survey of 72 of these ventures are used to analyze these relationships using regression, ANOVA, correlations, t-tests, and non-parametric statistics. The findings suggest a significant positive relationship between competitive advantage and partnership diversity, heterogeneous resource conditions, social innovation, and earned income. Social capital is the type of resource most significantly related to competitive advantage. Founder previous start-up experience, client location, and business plan completeness are also found to be significant in the relationship between partnership diversity and competitive advantage. Finally the findings suggest that hybrid social ventures create a greater competitive advantage than nonprofit or for-profit social ventures. Consequently, this dissertation not only provides academics further insight into the factors that impact nascent social value creation, venture development, and ability to launch, but also offers practitioners guidance on how best to organize certain processes to create a competitive advantage. As a result more insight is gained into the nascent social venture creation process and how these ventures can have a greater impact on society.

The Effects of a Family-Based Educational Intervention on the Prevention of Lead Poisoning in Children

Parents completed a survey measuring their knowledge of lead poisoning. Children, 24 to 36 months old received two blood lead level screens. Parents in the treatment group showed significantly higher scores on the posttest, and their children showed greater decreased blood lead levels than participants in the control group.

"And a child shall lead them?": Slavery, childhood, and African cultural identity in Jamaica, 1750--1838

Based primarily on archival evidence collected in Jamaica, this dissertation examined the nature of childhood in the plantation complex between 1750 and 1838, how colonial society and the slave community defined childhood, and how that definition changed over time. It proves how childhood and slavery influenced and changed each other during these years, with the abolitionist movement standing as the main catalyst for change. Although this project chronologically examined the changing nature of slave childhood in Jamaica through four shifts of Jamaican history, each chapter topically focused on slave childhood through the lenses of labor, family, resistance, race, status, culture, education, and freedom. ^ The research showed that although slavery forced slave children into an early adulthood, childhood was a contested process that changed with each generation of children. As the abolitionist movement motivated changes in planter opinion on the value of children to the plantation economy, planters placed increased responsibility on slave children to lead them towards economic stability and profitability. Meanwhile, slave children struggled to survive slavery by reinventing and modifying their ideas of family and kinship and reacting to their situation through various acts of resistance. Although slave parents gained many opportunities to raise their children on their own terms, they struggled to maintain control over that process as planters attempted to change the nature of African cultural identity in Jamaica by impressing Christian and English values on slave children. Under apprenticeship, childhood returned to its previous status as a liability in the eyes of the Jamaican planters. Yet, Jamaican children faced the prospect of an unwritten childhood, one that was free from planter control and gave Jamaican laborers hope for the future. In the end, this dissertation told the story of an overlooked childhood, one that was often defined by Jamaican planters, but frequently contested by the slaves themselves. ^

An agent-based model of team coordination and performance

This research is based on the premises that teams can be designed to optimize its performance, and appropriate team coordination is a significant factor to team outcome performance. Contingency theory argues that the effectiveness of a team depends on the right fit of the team design factors to the particular job at hand. Therefore, organizations need computational tools capable of predict the performance of different configurations of teams. This research created an agent-based model of teams called the Team Coordination Model (TCM). The TCM estimates the coordination load and performance of a team, based on its composition, coordination mechanisms, and job’s structural characteristics. The TCM can be used to determine the team’s design characteristics that most likely lead the team to achieve optimal performance. The TCM is implemented as an agent-based discrete-event simulation application built using JAVA and Cybele Pro agent architecture. The model implements the effect of individual team design factors on team processes, but the resulting performance emerges from the behavior of the agents. These team member agents use decision making, and explicit and implicit mechanisms to coordinate the job. The model validation included the comparison of the TCM’s results with statistics from a real team and with the results predicted by the team performance literature. An illustrative 26-1 fractional factorial experimental design demonstrates the application of the simulation model to the design of a team. The results from the ANOVA analysis have been used to recommend the combination of levels of the experimental factors that optimize the completion time for a team that runs sailboats races. This research main contribution to the team modeling literature is a model capable of simulating teams working on complex job environments. The TCM implements a stochastic job structure model capable of capturing some of the complexity not capture by current models. In a stochastic job structure, the tasks required to complete the job change during the team execution of the job. This research proposed three new types of dependencies between tasks required to model a job as a stochastic structure. These dependencies are conditional sequential, single-conditional sequential, and the merge dependencies.

Could Relatedness Help Explain Why Individuals Lead in Bottlenose Dolphin Groups?

In many species, particular individuals consistently lead group travel. While benefits to followers often are relatively obvious, including access to resources, benefits to leaders are often less obvious. This is especially true for species that feed on patchy mobile resources where all group members may locate prey simultaneously and food intake likely decreases with increasing group size. Leaders in highly complex habitats, however, could provide access to foraging resources for less informed relatives, thereby gaining indirect benefits by helping kin. Recently, leadership has been documented in a population of bottlenose dolphins (Tursiops truncatus) where direct benefits to leaders appear unlikely. To test whether leaders could benefit indirectly we examined relatedness between leader-follower pairs and compared these levels to pairs who associated but did not have leader-follower relationship (neither ever led the other). We found the average relatedness value for leader-follower pairs was greater than expected based on chance. The same was not found when examining non leader-follower pairs. Additionally, relatedness for leader-follower pairs was positively correlated with association index values, but no correlation was found for this measure in non leader-follower pairs. Interestingly, haplotypes were not frequently shared between leader-follower pairs (25%). Together, these results suggest that bottlenose dolphin leaders have the opportunity to gain indirect benefits by leading relatives. These findings provide a potential mechanism for the maintenance of leadership in a highly dynamic fission-fusion population with few obvious direct benefits to leaders.

The investigation of photocatalysts and iron based materials in the oxidation and adsorption of toxic organic and chromium materials

The presences of heavy metals, organic contaminants and natural toxins in natural water bodies pose a serious threat to the environment and the health of living organisms. Therefore, there is a critical need to identify sustainable and environmentally friendly water treatment processes. In this dissertation, I focus on the fundamental studies of advanced oxidation processes and magnetic nano-materials as promising new technologies for water treatments. Advanced oxidation processes employ reactive oxygen species (ROS) which can lead to the mineralization of a number of pollutants and toxins. The rates of formation, steady-state concentrations, and kinetic parameters of hydroxyl radical and singlet oxygen produced by various TiO2 photocatalysts under UV or visible irradiations were measured using selective chemical probes. Hydroxyl radical is the dominant ROS, and its generation is dependent on experimental conditions. The optimal condition for generation of hydroxyl radical by of TiO2 coated glass microspheres is studied by response surface methodology, and the optimal conditions are applied for the degradation of dimethyl phthalate. Singlet oxygen (1O2) also plays an important role for advanced processes, so the degradation of microcystin-LR by rose bengal, an 1O2 sensitizer was studied. The measured bimolecular reaction rate constant between MC-LR and 1O2 is ∼ 106 M-1 s-1 based on competition kinetics with furfuryl alcohol. The typical adsorbent needs separation after the treatment, while magnetic iron oxides can be easily removed by a magnetic field. Maghemite and humic acid coated magnetite (HA-Fe3O4) were synthesized, characterized and applied for chromium(VI) removal. The adsorption of chromium(VI) by maghemite and HA-Fe3O4 follow a pseudo-second-order kinetic process. The adsorption of chromium(VI) by maghemite is accurately modeled using adsorption isotherms, and solution pH and presence of humic acid influence adsorption. Humic acid coated magnetite can adsorb and reduce chromium(VI) to non-toxic chromium (III), and the reaction is not highly dependent on solution pH. The functional groups associated with humic acid act as ligands lead to the Cr(III) complex via a coupled reduction-complexation mechanism. Extended X-ray absorption fine structure spectroscopy demonstrates the Cr(III) in the Cr-loaded HA-Fe 3O4 materials has six neighboring oxygen atoms in an octahedral geometry with average bond lengths of 1.98 Å.

Self-tuning algorithm for dsp-based motion control in cnc applications

This thesis describes the development of an adaptive control algorithm for Computerized Numerical Control (CNC) machines implemented in a multi-axis motion control board based on the TMS320C31 DSP chip. The adaptive process involves two stages: Plant Modeling and Inverse Control Application. The first stage builds a non-recursive model of the CNC system (plant) using the Least-Mean-Square (LMS) algorithm. The second stage consists of the definition of a recursive structure (the controller) that implements an inverse model of the plant by using the coefficients of the model in an algorithm called Forward-Time Calculation (FTC). In this way, when the inverse controller is implemented in series with the plant, it will pre-compensate for the modification that the original plant introduces in the input signal. The performance of this solution was verified at three different levels: Software simulation, implementation in a set of isolated motor-encoder pairs and implementation in a real CNC machine. The use of the adaptive inverse controller effectively improved the step response of the system in all three levels. In the simulation, an ideal response was obtained. In the motor-encoder test, the rise time was reduced by as much as 80%, without overshoot, in some cases. Even with the larger mass of the actual CNC machine, decrease of the rise time and elimination of the overshoot were obtained in most cases. These results lead to the conclusion that the adaptive inverse controller is a viable approach to position control in CNC machinery.

C-MEMS Based Micro Enzymatic Biofuel Cells

Miniaturized, self-sufficient bioelectronics powered by unconventional micropower may lead to a new generation of implantable, wireless, minimally invasive medical devices, such as pacemakers, defibrillators, drug-delivering pumps, sensor transmitters, and neurostimulators. Studies have shown that micro-enzymatic biofuel cells (EBFCs) are among the most intuitive candidates for in vivo micropower. In the fisrt part of this thesis, the prototype design of an EBFC chip, having 3D intedigitated microelectrode arrays was proposed to obtain an optimum design of 3D microelectrode arrays for carbon microelectromechanical systems (C-MEMS) based EBFCs. A detailed modeling solving partial differential equations (PDEs) by finite element techniques has been developed on the effect of 1) dimensions of microelectrodes, 2) spatial arrangement of 3D microelectrode arrays, 3) geometry of microelectrode on the EBFC performance based on COMSOL Multiphysics. In the second part of this thesis, in order to investigate the performance of an EBFC, behavior of an EBFC chip performance inside an artery has been studied. COMSOL Multiphysics software has also been applied to analyze mass transport for different orientations of an EBFC chip inside a blood artery. Two orientations: horizontal position (HP) and vertical position (VP) have been analyzed. The third part of this thesis has been focused on experimental work towards high performance EBFC. This work has integrated graphene/enzyme onto three-dimensional (3D) micropillar arrays in order to obtain efficient enzyme immobilization, enhanced enzyme loading and facilitate direct electron transfer. The developed 3D graphene/enzyme network based EBFC generated a maximum power density of 136.3 μWcm-2 at 0.59 V, which is almost 7 times of the maximum power density of the bare 3D carbon micropillar arrays based EBFC. To further improve the EBFC performance, reduced graphene oxide (rGO)/carbon nanotubes (CNTs) has been integrated onto 3D mciropillar arrays to further increase EBFC performance in the fourth part of this thesisThe developed rGO/CNTs based EBFC generated twice the maximum power density of rGO based EBFC. Through a comparison of experimental and theoretical results, the cell performance efficiency is noted to be 67%.