Aspects of the transplantation, storage and maintenance of corals (Montastraea Faveolata, Acropora Cervicornis and A. Palmata)

The purpose of this study is to explore aspects of coral transplantation for restoration. Montastraea faveolata cores of 2.54 and 5.0 cm were stored in aquaria, on an array and on the substrate. Survival on the array and substrate were 100% for 12 and 11 months respectively. Branches of Acropora cervicornis had 75.0 % survival on the substrate and 91.7% on the array. Disease caused mortality for the A. cervicornis and the 2.54 cm cores in the aquaria but not for the 5.0 cm cores. Growth was significantly higher for A. cervicornis and A. palmata branches stored on an array than in an open seawater system. The storage type affected growth patterns of both species. M. faveolata fed three times/week increased in surface area significantly more than those fed once and twice/week. Corals fed once per week significantly increased their polyp density. Corals had intermittent respiration while under sub-aerial conditions.

Optimization of Cooling Protocols for Hearts Destined for Transplantation

Design and analysis of conceptually different cooling systems for the human heart preservation are numerically investigated. A heart cooling container with required connections was designed for a normal size human heart. A three-dimensional, high resolution human heart geometric model obtained from CT-angio data was used for simulations. Nine different cooling designs are introduced in this research. The first cooling design (Case 1) used a cooling gelatin only outside of the heart. In the second cooling design (Case 2), the internal parts of the heart were cooled via pumping a cooling liquid inside both the heart’s pulmonary and systemic circulation systems. An unsteady conjugate heat transfer analysis is performed to simulate the temperature field variations within the heart during the cooling process. Case 3 simulated the currently used cooling method in which the coolant is stagnant. Case 4 was a combination of Case 1 and Case 2. A linear thermoelasticity analysis was performed to assess the stresses applied on the heart during the cooling process. In Cases 5 through 9, the coolant solution was used for both internal and external cooling. For external circulation in Case 5 and Case 6, two inlets and two outlets were designed on the walls of the cooling container. Case 5 used laminar flows for coolant circulations inside and outside of the heart. Effects of turbulent flow on cooling of the heart were studied in Case 6. In Case 7, an additional inlet was designed on the cooling container wall to create a jet impinging the hot region of the heart’s wall. Unsteady periodic inlet velocities were applied in Case 8 and Case 9. The average temperature of the heart in Case 5 was +5.0oC after 1500 s of cooling. Multi-objective constrained optimization was performed for Case 5. Inlet velocities for two internal and one external coolant circulations were the three design variables for optimization. Minimizing the average temperature of the heart, wall shear stress and total volumetric flow rates were the three objectives. The only constraint was to keep von Mises stress below the ultimate tensile stress of the heart’s tissue.