Effects of architectural features of air-permeable roof cladding materials on wind-induced uplift loading

Widespread damage to roofing materials (such as tiles and shingles) for low-rise buildings, even for weaker hurricanes, has raised concerns regarding design load provisions and construction practices. Currently the building codes used for designing low-rise building roofs are mainly based on testing results from building models which generally do not simulate the architectural features of roofing materials that may significantly influence the wind-induced pressures. Full-scale experimentation was conducted under high winds to investigate the effects of architectural details of high profile roof tiles and asphalt shingles on net pressures that are often responsible for damage to these roofing materials. Effects on the vulnerability of roofing materials were also studied. Different roof models with bare, tiled, and shingled roof decks were tested. Pressures acting on both top and bottom surfaces of the roofing materials were measured to understand their effects on the net uplift loading. The area-averaged peak pressure coefficients obtained from bare, tiled, and shingled roof decks were compared. In addition, a set of wind tunnel tests on a tiled roof deck model were conducted to verify the effects of tiles' cavity internal pressure. Both the full-scale and the wind tunnel test results showed that underside pressure of a roof tile could either aggravate or alleviate wind uplift on the tile based on its orientation on the roof with respect to the wind angle of attack. For shingles, the underside pressure could aggravate wind uplift if the shingle is located near the center of the roof deck. Bare deck modeling to estimate design wind uplift on shingled decks may be acceptable for most locations but not for field locations; it could underestimate the uplift on shingles by 30-60%. In addition, some initial quantification of the effects of roofing materials on wind uplift was performed by studying the wind uplift load ratio for tiled versus bare deck and shingled versus bare deck. Vulnerability curves, with and without considering the effects of tiles' cavity internal pressure, showed significant differences. Aerodynamic load provisions for low-rise buildings' roofs and their vulnerability can thus be more accurately evaluated by considering the effects of the roofing materials.

Social-cognitive antecedents of ambidextrous orientation in family-owned startups: The role of family ties, achievement motivation, and internal locus of control

Regulatory Focus Theory predicts that the motivation to self-regulate goal-directed thought and behavior depends on two distinct regulation strategies: a promotion focus based on attaining gains and a prevention focus based on avoiding losses. This study took a social-cognitive approach predicting that regulatory focus has an impact on how family startups (several family related founders) explore "new ideas", exploit "old certainties" and achieve the balance of both (ambidexterity), compared to lone founder startups (only one founder present). It was proposed that the social context of family ties among founders leads them to a prevention focus concerned with avoiding the loss of the socio-emotional benefits of those ties. In order to avoid such a loss, family founders were expected to increase their risk perceptions and thus, explore less than lone founders, who lack such socio-emotional ties. It was also proposed that two commonly used psychological traits in entrepreneurship research —achievement motivation and internal locus of control, predispose entrepreneurs to a promotion focus. Founders with a promotion focus, in turn, were hypothesized to lead startups to more risk-seeking behaviors and to more explorative orientation. The previous argument was used as a springboard to derive hypotheses about ambidexterity (the ability to exploit and explore simultaneously) and survival hazards. Using Regulatory Focus Theory, exploitative orientation, conceptualized as the motivational strength to continue on previous paths of action, was hypothesized to be not significantly different from that of lone founder startups. Taking previous arguments together, lone founder startups were hypothesized to be more ambidextrous than family startups. Finally, ambidexterity and internal locus of control were hypothesized to reduce survival hazards in family startups. The findings suggested that family startups explore less than lone founder startups even after controlling for group effects. Interesting but contradictory findings revealed that internal locus of control have both a positive direct effect and a positive interaction that increases the explorative and ambidextrous orientation gap of family startups over lone founder startups. As expected, ambidexterity and internal locus of control reduced survival hazards on family startups. Implications for practitioners were derived based on a sample of 470 nascent entrepreneurs.

The investigation of photocatalysts and iron based materials in the oxidation and adsorption of toxic organic and chromium materials

The presences of heavy metals, organic contaminants and natural toxins in natural water bodies pose a serious threat to the environment and the health of living organisms. Therefore, there is a critical need to identify sustainable and environmentally friendly water treatment processes. In this dissertation, I focus on the fundamental studies of advanced oxidation processes and magnetic nano-materials as promising new technologies for water treatments. Advanced oxidation processes employ reactive oxygen species (ROS) which can lead to the mineralization of a number of pollutants and toxins. The rates of formation, steady-state concentrations, and kinetic parameters of hydroxyl radical and singlet oxygen produced by various TiO2 photocatalysts under UV or visible irradiations were measured using selective chemical probes. Hydroxyl radical is the dominant ROS, and its generation is dependent on experimental conditions. The optimal condition for generation of hydroxyl radical by of TiO2 coated glass microspheres is studied by response surface methodology, and the optimal conditions are applied for the degradation of dimethyl phthalate. Singlet oxygen (1O2) also plays an important role for advanced processes, so the degradation of microcystin-LR by rose bengal, an 1O2 sensitizer was studied. The measured bimolecular reaction rate constant between MC-LR and 1O2 is ∼ 106 M-1 s-1 based on competition kinetics with furfuryl alcohol. The typical adsorbent needs separation after the treatment, while magnetic iron oxides can be easily removed by a magnetic field. Maghemite and humic acid coated magnetite (HA-Fe3O4) were synthesized, characterized and applied for chromium(VI) removal. The adsorption of chromium(VI) by maghemite and HA-Fe3O4 follow a pseudo-second-order kinetic process. The adsorption of chromium(VI) by maghemite is accurately modeled using adsorption isotherms, and solution pH and presence of humic acid influence adsorption. Humic acid coated magnetite can adsorb and reduce chromium(VI) to non-toxic chromium (III), and the reaction is not highly dependent on solution pH. The functional groups associated with humic acid act as ligands lead to the Cr(III) complex via a coupled reduction-complexation mechanism. Extended X-ray absorption fine structure spectroscopy demonstrates the Cr(III) in the Cr-loaded HA-Fe 3O4 materials has six neighboring oxygen atoms in an octahedral geometry with average bond lengths of 1.98 Å.

Social-cognitive Antecedents of Ambidextrous Orientation in Family-owned Startups: The Role of Family Ties, Achievement Motivation, and Internal Locus of Control

Regulatory Focus Theory predicts that the motivation to self-regulate goal-directed thought and behavior depends on two distinct regulation strategies: a promotion focus based on attaining gains and a prevention focus based on avoiding losses. This study took a social-cognitive approach predicting that regulatory focus has an impact on how family startups (several family related founders) explore “new ideas”, exploit “old certainties” and achieve the balance of both (ambidexterity), compared to lone founder startups (only one founder present). It was proposed that the social context of family ties among founders leads them to a prevention focus concerned with avoiding the loss of the socio-emotional benefits of those ties. In order to avoid such a loss, family founders were expected to increase their risk perceptions and thus, explore less than lone founders, who lack such socio-emotional ties. It was also proposed that two commonly used psychological traits in entrepreneurship research --achievement motivation and internal locus of control, predispose entrepreneurs to a promotion focus. Founders with a promotion focus, in turn, were hypothesized to lead startups to more risk-seeking behaviors and to more explorative orientation. The previous argument was used as a springboard to derive hypotheses about ambidexterity (the ability to exploit and explore simultaneously) and survival hazards. Using Regulatory Focus Theory, exploitative orientation, conceptualized as the motivational strength to continue on previous paths of action, was hypothesized to be not significantly different from that of lone founder startups. Taking previous arguments together, lone founder startups were hypothesized to be more ambidextrous than family startups. Finally, ambidexterity and internal locus of control were hypothesized to reduce survival hazards in family startups. The findings suggested that family startups explore less than lone founder startups even after controlling for group effects. Interesting but contradictory findings revealed that internal locus of control have both a positive direct effect and a positive interaction that increases the explorative and ambidextrous orientation gap of family startups over lone founder startups. As expected, ambidexterity and internal locus of control reduced survival hazards on family startups. Implications for practitioners were derived based on a sample of 470 nascent entrepreneurs.

Evaluation of the internal structural validity of the Diagnostic and Statistical Manual of Mental Disorders (Fourth Edition) anxiety disorders in children and adolescents

The purpose of the present dissertation was to evaluate the internal validity of symptoms of four common anxiety disorders included in the Diagnostic and Statistical Manual of Mental Disorders fourth edition (text revision) (DSM-IV-TR; American Psychiatric Association, 2000), namely, separation anxiety disorder (SAD), social phobia (SOP), specific phobia (SP), and generalized anxiety disorder (GAD), in a sample of 625 youth (ages 6 to 17 years) referred to an anxiety disorders clinic and 479 parents. Confirmatory factor analyses (CFAs) were conducted on the dichotomous items of the SAD, SOP, SP, and GAD sections of the youth and parent versions of the Anxiety Disorders Interview Schedule for DSM-IV (ADIS-IV: C/P; Silverman & Albano, 1996) to test and compare a number of factor models including a factor model based on the DSM. Contrary to predictions, findings from CFAs showed that a correlated model with five factors of SAD, SOP, SP, GAD worry, and GAD somatic distress, provided the best fit of the youth data as well as the parent data. Multiple group CFAs supported the metric invariance of the correlated five factor model across boys and girls. Thus, the present study’s finding supports the internal validity of DSM-IV SAD, SOP, and SP, but raises doubt regarding the internal validity of GAD.^