Pulsed parabolic equation model of acoustic transmission (PPEMAT)

Underwater sound is very important in the field of oceanography where it is used for remote sensing in much the same way that radar is used in atmospheric studies. One way to mathematically model sound propagation in the ocean is by using the parabolic-equation method, a technique that allows range dependent environmental parameters. More importantly, this method can model sound transmission where the source emits either a pure tone or a short pulse of sound. Based on the parabolic approximation method and using the split-step Fourier algorithm, a computer model for underwater sound propagation was designed and implemented. This computer model differs from previous models in its use of the interactive mode, structured programming, modular design, and state-of-the-art graphics displays. In addition, the model maximizes the efficiency of computer time through synchronization of loosely coupled dual processors and the design of a restart capability. Since the model is designed for adaptability and for users with limited computer skills, it is anticipated that it will have many applications in the scientific community.

Lattice Boltzmann method for flow and heat transfer in microgeometries

Recent technological developments have made it possible to design various microdevices where fluid flow and heat transfer are involved. For the proper design of such systems, the governing physics needs to be investigated. Due to the difficulty to study complex geometries in micro scales using experimental techniques, computational tools are developed to analyze and simulate flow and heat transfer in microgeometries. However, conventional numerical methods using the Navier-Stokes equations fail to predict some aspects of microflows such as nonlinear pressure distribution, increase mass flow rate, slip flow and temperature jump at the solid boundaries. This necessitates the development of new computational methods which depend on the kinetic theory that are both accurate and computationally efficient. In this study, lattice Boltzmann method (LBM) was used to investigate the flow and heat transfer in micro sized geometries. The LBM depends on the Boltzmann equation which is valid in the whole rarefaction regime that can be observed in micro flows. Results were obtained for isothermal channel flows at Knudsen numbers higher than 0.01 at different pressure ratios. LBM solutions for micro-Couette and micro-Poiseuille flow were found to be in good agreement with the analytical solutions valid in the slip flow regime (0.01 < Kn < 0.1) and direct simulation Monte Carlo solutions that are valid in the transition regime (0.1 < Kn < 10) for pressure distribution and velocity field. The isothermal LBM was further extended to simulate flows including heat transfer. The method was first validated for continuum channel flows with and without constrictions by comparing the thermal LBM results against accurate solutions obtained from analytical equations and finite element method. Finally, the capability of thermal LBM was improved by adding the effect of rarefaction and the method was used to analyze the behavior of gas flow in microchannels. The major finding of this research is that, the newly developed particle-based method described here can be used as an alternative numerical tool in order to study non-continuum effects observed in micro-electro-mechanical-systems (MEMS).

Use of structural equation modeling to examine the association between breast cancer risk perception and repeat screening mammography among United States women

Breast cancer is the second leading cause of cancer death in United States women, estimated to be diagnosed in 1 out of 8 women in their lifetime. Screening mammography detects breast cancer in its pre-clinical stages when treatment strategies have the greatest chance of success, and is currently the only population-wide prevention method proven to reduce the morbidity and mortality associated with breast cancer. Research has shown that the majority of women are not screened annually, with estimates ranging front 6% - 30% of eligible women receiving all available annual mammograms over a 5-year or greater time frame. Health behavior theorists believe that perception of risk/susceptibility to a disease influences preventive health behavior, in this case, screening mammography The purpose of this dissertation is to examine the association between breast cancer risk perception and repeat screening mammography using a structural equation modeling (SEM) framework. A series of SEM multivariate regressions were conducted using self-reported, nationally representative data from the 2005 National Health Interview Survey. Interaction contrasts were tested to measure the potential moderating effects of variables which have been shown to be predictive of mammography use (physician recommendation, economic barriers, structural barriers, race/ethnicity) on the association between breast cancer risk perception and repeat mammography, while controlling for the covariates of age, income, region, nativity, and educational level. Of the variables tested for moderation, results of the SEM analyses identify physician recommendation as the only moderator of the relationship between risk perception and repeat mammography, thus the potentially most effective point of intervention to increase mammography screening, and decrease the morbidity and mortality associated with breast cancer. These findings expand the role of the physician from recommendation to one of attenuating the effect of risk perception and increasing repeat screening. The long range application of the research is the use of the SEM methodology to identify specific points of intervention most likely to increase preventive behavior in population-wide research, allowing for the most effective use of intervention funds.^

A Look Back To Look Forward: New Patterns In The Supply/Demand Equation In The Lodging Industry

In his dialogue entitled - A Look Back to Look Forward: New Patterns In The Supply/Demand Equation In The Lodging Industry - by Albert J. Gomes, Senior Principal, Pannell Kerr Forster, Washington, D.C. What the author intends for you to know is the following: “Factors which influence the lodging industry in the United States are changing that industry as far as where hotels are being located, what clientele is being served, and what services are being provided at different facilities. The author charts these changes and makes predictions for the future.” Gomes initially alludes to the evolution of transportation – the human, animal, mechanical progression - and how those changes, in the last 100 years or so, have had a significant impact on the hotel industry. “A look back to look forward treats the past as prologue. American hoteliers are in for some startling changes in their business,” Gomes says. “The man who said that the three most important determinants for the success of a hotel were “location, location, location” did a lot of good only in the short run.” Gomes wants to make you aware of the existence of what he calls, “locational obsolescence.” “Locational obsolescence is a fact of life, and at least in the United States bears a direct correlation to evolutionary changes in transportation technology,” he says. “…the primary business of the hospitality industry is to serve travelers or people who are being transported,” Gomes expands the point. Tied to the transportation element, the author also points out an interesting distinction between hotels and motels. In addressing, “…what clientele is being served, and what services are being provided at different facilities,” Gomes suggests that the transportation factor influences these constituents as well. Also coupled with this discussion are oil prices and shifts in transportation habits, with reference to airline travel being an ever increasing method of travel; capturing much of the inter-city travel market. Gomes refers to airline deregulation as an impetus. The point being, it’s a fluid market rather than a static one, and [successful] hospitality properties need to be cognizant of market dynamics and be able to adjust to the variables in their marketplace. Gomes provides many facts and figures to bolster his assertions. Interestingly and perceptively, at the time of this writing, Gomes alludes to America’s deteriorating road and bridge network. As of right now, in 2009, this is a major issue. Gomes rounds out this study by comparing European hospitality trends to those in the U.S.

A novel signal processing method for intraoperative neurophysiological monitoring in spinal surgeries

Intraoperative neurophysiologic monitoring is an integral part of spinal surgeries and involves the recording of somatosensory evoked potentials (SSEP). However, clinical application of IONM still requires anywhere between 200 to 2000 trials to obtain an SSEP signal, which is excessive and introduces a significant delay during surgery to detect a possible neurological damage. The aim of this study is to develop a means to obtain the SSEP using a much less, twelve number of recordings. The preliminary step involved was to distinguish the SSEP with the ongoing brain activity. We first establish that the brain activity is indeed quasi-stationary whereas an SSEP is expected to be identical every time a trial is recorded. An algorithm was developed using Chebychev time windowing for preconditioning of SSEP trials to retain the morphological characteristics of somatosensory evoked potentials (SSEP). This preconditioning was followed by the application of a principal component analysis (PCA)-based algorithm utilizing quasi-stationarity of EEG on 12 preconditioned trials. A unique Walsh transform operation was then used to identify the position of the SSEP event. An alarm is raised when there is a 10% time in latency deviation and/or 50% peak-to-peak amplitude deviation, as per the clinical requirements. The algorithm shows consistency in the results in monitoring SSEP in up to 6-hour surgical procedures even under this significantly reduced number of trials. In this study, the analysis was performed on the data recorded in 29 patients undergoing surgery during which the posterior tibial nerve was stimulated and SSEP response was recorded from scalp. This method is shown empirically to be more clinically viable than present day approaches. In all 29 cases, the algorithm takes 4sec to extract an SSEP signal, as compared to conventional methods, which take several minutes. The monitoring process using the algorithm was successful and proved conclusive under the clinical constraints throughout the different surgical procedures with an accuracy of 91.5%. Higher accuracy and faster execution time, observed in the present study, in determining the SSEP signals provide a much improved and effective neurophysiological monitoring process.

Lattice Boltzmann Method for Flow and Heat Transfer in Microgeometries

Recent technological developments have made it possible to design various microdevices where fluid flow and heat transfer are involved. For the proper design of such systems, the governing physics needs to be investigated. Due to the difficulty to study complex geometries in micro scales using experimental techniques, computational tools are developed to analyze and simulate flow and heat transfer in microgeometries. However, conventional numerical methods using the Navier-Stokes equations fail to predict some aspects of microflows such as nonlinear pressure distribution, increase mass flow rate, slip flow and temperature jump at the solid boundaries. This necessitates the development of new computational methods which depend on the kinetic theory that are both accurate and computationally efficient. In this study, lattice Boltzmann method (LBM) was used to investigate the flow and heat transfer in micro sized geometries. The LBM depends on the Boltzmann equation which is valid in the whole rarefaction regime that can be observed in micro flows. Results were obtained for isothermal channel flows at Knudsen numbers higher than 0.01 at different pressure ratios. LBM solutions for micro-Couette and micro-Poiseuille flow were found to be in good agreement with the analytical solutions valid in the slip flow regime (0.01 < Kn < 0.1) and direct simulation Monte Carlo solutions that are valid in the transition regime (0.1 < Kn < 10) for pressure distribution and velocity field. The isothermal LBM was further extended to simulate flows including heat transfer. The method was first validated for continuum channel flows with and without constrictions by comparing the thermal LBM results against accurate solutions obtained from analytical equations and finite element method. Finally, the capability of thermal LBM was improved by adding the effect of rarefaction and the method was used to analyze the behavior of gas flow in microchannels. The major finding of this research is that, the newly developed particle-based method described here can be used as an alternative numerical tool in order to study non-continuum effects observed in micro-electro-mechanical-systems (MEMS).