Enhanced biocompatibility of Nitinol via surface treatment and alloying

It is projected that by 2020, there will be 138 million Americans over 45, the age at which the increased incidence of heart diseases is documented. Many will require stents. This multi-billion dollar industry, with over 2 million patients worldwide, 15% of whom use Nitinol stents have experienced a decline in sales recently, due in part to thrombosis. It is a sudden blood clot that forms inside stents. As a result, the Food and Drug Administration and American Heart Association are calling for a new generation of stents, new designs and different alloys that are more adaptable to the arteries. The future of Nitinol therefore depends on a better understanding of the mechanisms by which Nitinol surfaces can be rendered stable and inert. In this investigation, binary and ternary Nitinol alloys were prepared and subjected to various surface treatments such as electropolishing (EP), magnetoelectropolishing (MEP) and water boiling & passivation (W&P). In vitro corrosion tests were conducted on Nitinol alloys in accordance with ASTM F 2129-08. The metal ions released into the electrolyte during corrosion tests were measured by Inductively Coupled Plasma Mass Spectroscopy (ICP-MS). Biocompatibility was assessed by observing the growth of human umbilical vein endothelial cells (HUVEC) on the surface of Nitinol alloys. Static and dynamic immersion tests were performed by immersing the Nitinol alloys in cell culture media and measuring the amount of metal ions released in solution. Sulforhodamine B (SRB) assays were performed to elucidate the effect of metal ions on the growth of HUVEC cells. The surfaces of the alloys were studied using Scanning Electron Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS) respectively. Finally, wettability and surface energy were measured by Contact Angle Meter, whereas surface roughness was measured by Atomic Force Microscopy (AFM). All the surface treated alloys exhibited high resistance to corrosion when compared with untreated alloys. SRB assays revealed that Ni and Cu ions exhibited greater toxicity than Cr, Ta and Ti ions on HUVEC cells. EP and MEP alloys possessed relatively smooth surfaces and some were composed of nickel oxides instead of elemental nickel as determined by XPS. MEP exhibited lowest surface energy and lowest surface roughness.

Enhanced Biocompatibility of NiTi (Nitinol) Via Surface Treatment and Alloying

It is projected that by 2020, there will be 138 million Americans over 45, the age at which the increased incidence of heart diseases is documented. Many will require stents. This multi-billion dollar industry, with over 2 million patients worldwide, 15% of whom use Nitinol stents have experienced a decline in sales recently, due in part to thrombosis. It is a sudden blood clot that forms inside stents. As a result, the Food and Drug Administration and American Heart Association are calling for a new generation of stents, new designs and different alloys that are more adaptable to the arteries. The future of Nitinol therefore depends on a better understanding of the mechanisms by which Nitinol surfaces can be rendered stable and inert. In this investigation, binary and ternary Nitinol alloys were prepared and subjected to various surface treatments such as electropolishing (EP), magnetoelectropolishing (MEP) and water boiling & passivation (W&P). In vitro corrosion tests were conducted on Nitinol alloys in accordance with ASTM F 2129-08. The metal ions released into the electrolyte during corrosion tests were measured by Inductively Coupled Plasma Mass Spectroscopy (ICP-MS). Biocompatibility was assessed by observing the growth of human umbilical vein endothelial cells (HUVEC) on the surface of Nitinol alloys. Static and dynamic immersion tests were performed by immersing the Nitinol alloys in cell culture media and measuring the amount of metal ions released in solution. Sulforhodamine B (SRB) assays were performed to elucidate the effect of metal ions on the growth of HUVEC cells. The surfaces of the alloys were studied using Scanning Electron Microscopy (SEM) and X-ray Photoelectron Spectroscopy (XPS) respectively. Finally, wettability and surface energy were measured by Contact Angle Meter, whereas surface roughness was measured by Atomic Force Microscopy (AFM). All the surface treated alloys exhibited high resistance to corrosion when compared with untreated alloys. SRB assays revealed that Ni and Cu ions exhibited greater toxicity than Cr, Ta and Ti ions on HUVEC cells. EP and MEP alloys possessed relatively smooth surfaces and some were composed of nickel oxides instead of elemental nickel as determined by XPS. MEP exhibited lowest surface energy and lowest surface roughness.

Correlates of Vitamin D Status in Healthy Older Adults Living in Miami-Dade and its Association with Non-Skeletal Outcomes: A Cross-Sectional Study

Examining factors that affect vitamin D status in the fast-growing elderly population of Miami-Dade, Florida, is needed. Vitamin D deficiency in older adults has been linked to correlates of disability, including falls and fractures, and cardiovascular disease. The purpose of this study was to determine the proportion of vitamin D insufficient individuals and their relationship with vitamin D insufficiency in older adults (n=97) living in Miami-Dade. We evaluated the association between vitamin D status and 1) dual task physical performance to understand the link between vitamin D and cognition in the context of mobility; and 2) cardiometabolic risk, measured by galvanic skin response, pulse oximetry, and blood pressure to create a composite score based on autonomic nervous system and endothelial function. Participants completed baseline assessments that included serum levels of vitamin D, anthropometrics, body composition, dual task physical performance and cardiometabolic risk. Surveys to evaluate vitamin D intake, sun exposure, physical activity, and depressive symptoms were completed. Spearman’s correlations, independent t-tests, paired t-tests, repeated measures ANOVAs, and multiple logistic and linear regressions were used to examine the relationship of vitamin D insufficiency (25(OH)D /ml) and sufficiency (25(OH)D ≥30 ng/ml) with determinants of vitamin D status, dual task physical performance variables and cardiometabolic risk scores. Although the proportion of vitamin D insufficient individuals was lower when compared to the prevalance of the general United States elderly population, it was still common in healthy community-dwelling older adults living in Miami-Dade County, especially among Hispanics. Factors that affected skin synthesis (ethnicity, and sun exposure), and bioavailability/metabolism (obesity) were significant predictors of vitamin D status. Vitamin D insufficiency was not significantly correlated with worse dual task physical performance; however, cognitive performance was worse in the vitamin D insufficient group. Our results suggest a relationship of vitamin D insufficiency with executive dysfunction, and support an association with cardiometabolic risk using an innovative electro-sensor complex, possibly by modulating autonomic nervous system activity and vascular function, thus affecting cardiac performance.