High frequency electric machine models for the evaluation of operational impacts in integrated drives

A high frequency physical phase variable electric machine model was developed using FE analysis. The model was implemented in a machine drive environment with hardware-in-the-loop. The novelty of the proposed model is that it is derived based on the actual geometrical and other physical information of the motor, considering each individual turn in the winding. This is the first attempt to develop such a model to obtain high frequency machine parameters without resorting to expensive experimental procedures currently in use. The model was used in a dynamic simulation environment to predict inverter-motor interaction. This includes motor terminal overvoltage, current spikes, as well as switching effects. In addition, a complete drive model was developed for electromagnetic interference (EMI) analysis and evaluation. This consists of the lumped parameter models of different system components, such as cable, inverter, and motor. The lumped parameter models enable faster simulations. The results obtained were verified by experimental measurements and excellent agreements were obtained. A change in the winding arrangement and its influence on the motor high frequency behavior has also been investigated. This was shown to have a little effect on the parameter values and in the motor high frequency behavior for equal number of turns. An accurate prediction of overvoltage and EMI in the design stages of the drive system would reduce the time required for the design modifications as well as for the evaluation of EMC compliance issues. The model can be utilized in the design optimization and insulation selection for motors. Use of this procedure could prove economical, as it would help designers develop and test new motor designs for the evaluation of operational impacts in various motor drive applications.

Temperature dependence and characterization of gold thin film actuated membranes for radio frequency microelectromechanical switches

Over the last 10 years, the development and the understanding of the mechanical properties of thin film material have been essential for improving the reliability and lifetime in operation of microelectromechanical systems (MEMS). Although the properties of a bulk material might be well characterized, thin-film properties are considerably different from those of the bulk and it cannot be assumed that mechanical properties measured using bulk specimens will apply to the same materials when used as a thin film in MEMS. For many microelectronic thin films, the material properties depend strongly on the details of the deposition process and the growth conditions on its substrate. ^ The purpose of this dissertation is to determine the temperature dependence of a gold thin film membrane on the pull down voltage of a MEMS switch as the temperature is varied from room temperature (300 K) to cryogenic temperature (10 K). For this purpose, an RF MEMS shunt switch was designed and fabricated. The switch is composed of a gold coplanar waveguide structure with a gold bridge membrane suspended above an area of the center conductor which is covered by a dielectric (BaTiO3). The gold membrane is actuated by an electrostatic force acting between the transmission line and the membrane when voltage is applied. ^ Material characterization of the gold evaporated thin film membrane was obtained via AFM, SEM, TEM and X-ray diffraction analyses. A mathematical relation was used to estimate the pull down voltage of the switch at cryogenic temperature and results showed that the mathematical theory match the experimental values of the tested MEMS switches. ^

Food customs of rural and urban Inupiaq elders and their relationships to select nutrition parameters, food insecurity, health, and physical and mental functioning

The Inupiaq Tribe resides north of the Arctic Circle in northwestern Alaska. The people are characterized by their continued dependence on harvested fish, game and plants, known as a subsistence lifestyle (Lee 2000:35-45). Many are suggesting that they leave their historical home and move to urban communities, places believed to be more comfortable as they age. Tribal Elders disagree and have stated, "Elders need to be near the river where they were raised" (Branch 2005:1). The research questions focused on differences that location had on four groups of variables: nutrition parameters, community support, physical functioning and health. A total of 101 Inupiaq Elders ≥ 50 years were surveyed: 52 from two rural villages, and 49 in Anchorage. Location did not influence energy intake or intake of protein; levels of nutrition risk and food insecurity; all had similar rates between the two groups. Both rural and urban Elders reported few limitations of ADLs and IADLs. Self-reported general health scores (SF-12.v2 GH) were also similar by location. Differences were found with rural Elders reporting higher physical functioning summary scores (SF-12.v2 PCS), higher mental health scores (SF-12.v2 MH), higher vitality and less pain even though the rural mean ages were five years older than the urban Elders. Traditional food customs appear to support the overall health and well being of the rural Inupiaq Elders as demonstrated by higher intakes of Native foods, stronger food sharing networks and higher family activity scores than did urban Elders. The rural community appeared to foster continued physical activity. It has been said that when Elders are in the rural setting they are near "people they know" and it is a place "where they can get their Native food" (NRC 2005). These factors appear to be important as Inupiaq Elders age, as rural Inupiaq Elders fared as well or better than Inupiaq Elders in terms of diet, mental and physical health.