Soot measurements in steady and pulsed ethylene/air diffusion flames using Laser-Induced Incandescence

Combustion-generated carbon black nano particles, or soot, have both positive and negative effects depending on the application. From a positive point of view, it is used as a reinforcing agent in tires, black pigment in inks, and surface coatings. From a negative point of view, it affects performance and durability of many combustion systems, it is a major contributor of global warming, and it is linked to respiratory illness and cancer. Laser-Induced Incandescence (LII) was used in this study to measure soot volume fractions in four steady and twenty-eight pulsed ethylene diffusion flames burning at atmospheric pressure. A laminar coflow diffusion burner combined with a very-high-speed solenoid valve and control circuit provided unsteady flows by forcing the fuel flow with frequencies between 10 Hz and 200 Hz. Periodic flame oscillations were captured by two-dimensional phase-locked LII images and broadband luminosity images for eight phases (0° – 360°) covering each period. A comparison between the steady and pulsed flames and the effect of the pulsation frequency on soot volume fraction in the flame region and the post flame region are presented. The most significant effect of pulsing frequency was observed at 10 Hz. At this frequency, the flame with the lowest mean flow rate had 1.77 times enhancement in peak soot volume fraction and 1.2 times enhancement in total soot volume fraction; whereas the flame with the highest mean flow rate had no significant change in the peak soot volume fraction and 1.4 times reduction in the total soot volume fraction. A correlation (fvRe-1 = a + b·Str) for the total soot volume fraction in the flame region for the unsteady laminar ethylene flames was obtained for the pulsation frequency between 10 Hz and 200 Hz, and the Reynolds number between 37 and 55. The soot primary particle size in steady and unsteady flames was measured using the Time-Resolved Laser-Induced Incandescence (TIRE-LII) and the double-exponential fit method. At maximum frequency (200 Hz), the soot particles were smaller in size by 15% compared to the steady case in the flame with the highest mean flow rate.

U.S. Army front line artillery observation during the 1945 Okinawa campaign: An oral history case study

This dissertation explores the role of artillery forward observation teams during the battle of Okinawa (April–June 1945). It addresses a variety of questions associated with this front line artillery support. First, it examines the role of artillery itself in the American victory over the Japanese on Okinawa. Second, it traces the history of the forward observer in the three decades before the end of World War II. Third, it defines the specific role of the forward observation teams during the battle: what they did and how they did it during this three-month duel. Fourth, it deals with the particular problems of the forward observer. These included coordination with the local infantry commander, adjusting to the periodic rotation between the front lines and the artillery battery behind the line of battle, responding to occasional problems with "friendly fire" (American artillery falling on American ground forces), dealing with personnel turnover in the teams (due to death, wounds, and illness), and finally, developing a more informal relationship between officers and enlisted men to accommodate the reality of this recently created combat assignment. Fifth, it explores the experiences of a select group of men who served on (or in proximity to) forward observation teams on Okinawa. Previous scholars and popular historians of the battle have emphasized the role of Marines, infantrymen, and flame-throwing armor. This work offers a different perspective on the battle and it uses new sources as well. A pre-existing archive of interviews with Okinawan campaign forward observer team members conducted in the 1990s forms the core of the oral history component of this research project. The verbal accounts were checked against and supplemented by a review of unit reports obtained from the U.S. National Archives and various secondary sources. The dissertation concludes that an understanding of American artillery observation is critical to a more complete comprehension of the battle of Okinawa. These mid-ranking (and largely middle class) soldiers proved capable of adjusting to the demands of combat conditions. They provide a unique and understudied perspective of the entire battle.

Soot Measurements in Steady and Pulsed Ethylene/Air Diffusion Flames Using Laser-Induced Incandescence

Combustion-generated carbon black nano particles, or soot, have both positive and negative effects depending on the application. From a positive point of view, it is used as a reinforcing agent in tires, black pigment in inks, and surface coatings. From a negative point of view, it affects performance and durability of many combustion systems, it is a major contributor of global warming, and it is linked to respiratory illness and cancer. Laser-Induced Incandescence (LII) was used in this study to measure soot volume fractions in four steady and twenty-eight pulsed ethylene diffusion flames burning at atmospheric pressure. A laminar coflow diffusion burner combined with a very-high-speed solenoid valve and control circuit provided unsteady flows by forcing the fuel flow with frequencies between 10 Hz and 200 Hz. Periodic flame oscillations were captured by two-dimensional phase-locked LII images and broadband luminosity images for eight phases (0°- 360°) covering each period. A comparison between the steady and pulsed flames and the effect of the pulsation frequency on soot volume fraction in the flame region and the post flame region are presented. The most significant effect of pulsing frequency was observed at 10 Hz. At this frequency, the flame with the lowest mean flow rate had 1.77 times enhancement in peak soot volume fraction and 1.2 times enhancement in total soot volume fraction; whereas the flame with the highest mean flow rate had no significant change in the peak soot volume fraction and 1.4 times reduction in the total soot volume fraction. A correlation (ƒv Reˉ1 = a+b· Str) for the total soot volume fraction in the flame region for the unsteady laminar ethylene flames was obtained for the pulsation frequency between 10 Hz and 200 Hz, and the Reynolds number between 37 and 55. The soot primary particle size in steady and unsteady flames was measured using the Time-Resolved Laser-Induced Incandescence (TIRE-LII) and the double-exponential fit method. At maximum frequency (200 Hz), the soot particles were smaller in size by 15% compared to the steady case in the flame with the highest mean flow rate.