An examination of Lotka's law in the field of Library and Information Studies

The purpose of this study was to test Lotka’s law of scientific publication productivity using the methodology outlined by Pao (1985), in the field of Library and Information Studies (LIS). Lotka’s law has been sporadically tested in the field over the past 30+ years, but the results of these studies are inconclusive due to the varying methods employed by the researchers. ^ A data set of 1,856 citations that were found using the ISI Web of Knowledge databases were studied. The values of n and c were calculated to be 2.1 and 0.6418 (64.18%) respectively. The Kolmogorov-Smirnov (K-S) one sample goodness-of-fit test was conducted at the 0.10 level of significance. The Dmax value is 0.022758 and the calculated critical value is 0.026562. It was determined that the null hypothesis stating that there is no difference in the observed distribution of publications and the distribution obtained using Lotka’s and Pao’s procedure could not be rejected. ^ This study finds that literature in the field of Library and Information Studies does conform to Lotka’s law with reliable results. As result, Lotka’s law can be used in LIS as a standardized means of measuring author publication productivity which will lead to findings that are comparable on many levels (e.g., department, institution, national). Lotka’s law can be employed as an empirically proven analytical tool to establish publication productivity benchmarks for faculty and faculty librarians. Recommendations for further study include (a) exploring the characteristics of the high and low producers; (b) finding a way to successfully account for collaborative contributions in the formula; and, (c) a detailed study of institutional policies concerning publication productivity and its impact on the appointment, tenure and promotion process of academic librarians. ^

An Examination of Lotka’s law in the Field of Library and Information Studies

The purpose of this study was to test Lotka’s law of scientific publication productivity using the methodology outlined by Pao (1985), in the field of Library and Information Studies (LIS). Lotka’s law has been sporadically tested in the field over the past 30+ years, but the results of these studies are inconclusive due to the varying methods employed by the researchers. A data set of 1,856 citations that were found using the ISI Web of Knowledge databases were studied. The values of n and c were calculated to be 2.1 and 0.6418 (64.18%) respectively. The Kolmogorov-Smirnov (K-S) one sample goodness-of-fit test was conducted at the 0.10 level of significance. The Dmax value is 0.022758 and the calculated critical value is 0.026562. It was determined that the null hypothesis stating that there is no difference in the observed distribution of publications and the distribution obtained using Lotka’s and Pao’s procedure could not be rejected. This study finds that literature in the field of library and Information Studies does conform to Lotka’s law with reliable results. As result, Lotka’s law can be used in LIS as a standardized means of measuring author publication productivity which will lead to findings that are comparable on many levels (e.g., department, institution, national). Lotka’s law can be employed as an empirically proven analytical tool to establish publication productivity benchmarks for faculty and faculty librarians. Recommendations for further study include (a) exploring the characteristics of the high and low producers; (b) finding a way to successfully account for collaborative contributions in the formula; and, (c) a detailed study of institutional policies concerning publication productivity and its impact on the appointment, tenure and promotion process of academic librarians.

Formation and investigation of nanostructured thin films

Small devices, in the range of nanometers, are playing a major role in today's technology. The field of nanotechnology is concerned with materials and systems whose structures and components exhibit novel and significantly improved physical, chemical and biological properties, phenomena and processes due to their small nanoscale size. Researches more and more are finding that structural features in the range of about 1 to 100 nanometers behave quite differently than isolated molecules (1 nanometer) or bulk materials. For comparison, a 10 nanometer structure is 1000 times smaller than the diameter of a human hair. The virtues of working in the nanodomain are increasingly recognized by the scientific community and discussed in the popular press. The use of such devices is expected to revolutionize our industries and lives. ^ This work mainly focuses on the fabrication, characterization and discovery of new nanostructured thin films. This research consists of the design of a new high-deposition rate nanoparticle machine for depositing nanostructured films from beams of nanoparticles and investigation film's unique optical and physical properties.^ A high-deposition rate nanoparticle machine was designed, built and successfully tested. Different nanostructured thin films were deposited from Copper, Gold, Iron and Zirconium targets with the grain size of between 1 to 20 nm under different conditions. Transmission Electron Microscopy (TEM), Atomic Force Microscopy (AFM), and x-ray diffraction (XRD) confirmed nanoscale grain size structures of deposited films. The optical properties of the nanostructured films deposited from copper, Iron and Zirconium targets were significantly different from optical properties of bulk and thin films. Zr, Cu and Fe films were transparent. Gold films revealed an epitaxial contact with the silicon substrate with interesting crystal structures. ^ The new high-deposition rate nanoparticle machine was able to deposit new nanostructured films with different properties from bulk and thin films reported in the literatures. ^

Ecological indicators for system-wide assessment of the greater everglades ecosystem restoration program

Developing scientifically credible tools for measuring the success of ecological restoration projects is a difficult and a non-trivial task. Yet, reliable measures of the general health and ecological integrity of ecosystems are critical for assessing the success of restoration programs. The South Florida Ecosystem Restoration Task Force (Task Force), which helps coordinate a multi-billion dollar multi-organizational effort between federal, state, local and tribal governments to restore the Florida Everglades, is using a small set of system-wide ecological indicators to assess the restoration efforts. A team of scientists and managers identified eleven ecological indicators from a field of several hundred through a selection process using 12 criteria to determine their applicability as part of a system-wide suite. The 12 criteria are: (1) is the indicator relevant to the ecosystem? (2) Does it respond to variability at a scale that makes it applicable to the entire system? (3) Is the indicator feasible to implement and is it measureable? (4) Is the indicator sensitive to system drivers and is it predictable? (5) Is the indicator interpretable in a common language? (6) Are there situations where an optimistic trend with regard to an indicator might suggest a pessimistic restoration trend? (7) Are there situations where a pessimistic trend with regard to an indicator may be unrelated to restoration activities? (8) Is the indicator scientifically defensible? (9) Can clear, measureable targets be established for the indicator to allow for assessments of success? (10) Does the indicator have specificity to be able to result in corrective action? (11) What level of ecosystem process or structure does the indicator address? (12) Does the indicator provide early warning signs of ecological change? In addition, a two page stoplight report card was developed to assist in communicating the complex science inherent in ecological indicators in a common language for resource managers, policy makers and the public. The report card employs a universally understood stoplight symbol that uses green to indicate that targets are being met, yellow to indicate that targets have not been met and corrective action may be needed and red to represent that targets are far from being met and corrective action is required. This paper presents the scientific process and the results of the development and selection of the criteria, the indicators and the stoplight report card format and content. The detailed process and results for the individual indicators are presented in companion papers in this special issue of Ecological Indicators.

Design and construction of a portable force-reflecting manual controller for teleoperation systems

A man-machine system called teleoperator system has been developed to work in hazardous environments such as nuclear reactor plants. Force reflection is a type of force feedback in which forces experienced by the remote manipulator are fed back to the manual controller. In a force-reflecting teleoperation system, the operator uses the manual controller to direct the remote manipulator and receives visual information from a video image and/or graphical animation on the computer screen. This thesis presents the design of a portable Force-Reflecting Manual Controller (FRMC) for the teleoperation of tasks such as hazardous material handling, waste cleanup, and space-related operations. The work consists of the design and construction of a prototype 1-Degree-of-Freedom (DOF) FRMC, the development of the Graphical User Interface (GUI), and system integration. Two control strategies - PID and fuzzy logic controllers are developed and experimentally tested. The system response of each is analyzed and evaluated. In addition, the concept of a telesensation system is introduced, and a variety of design alternatives of a 3-DOF FRMC are proposed for future development.

Enhancement of field emission from multistage structure of carbon nanotube arrays

The field emission measurements for the multistage structured nanotubes (i.e., thin-multiwall and single wall carbon nanotubes grown on multiwall carbon nanotubes) were carried out and a low turn-on field of ~0.45 V/ μm, high emission current of 450 μA at a field of IV/μm and a large field enhancement factor of ~26200 were obtained. The thin multiwall carbon nanotubes (thin-MWNTs) and single wall carbon nanotubes (SWNTs) were grown on the regular arrays of vertically aligned multi wall carbon nanotubes (MWNTs) on porous silicon substrate by Chemical Vapor Deposition (CVD) method. The thin-MWNTs and SWNTs grown on MWNTs in this way have a multistage structure which gives higher enhancement of the electric field and hence the electron field emission.