Development of hardware in the loop real-time control techniques for hybrid power systems involving distributed demands and sustainable energy sources

The future power grid will effectively utilize renewable energy resources and distributed generation to respond to energy demand while incorporating information technology and communication infrastructure for their optimum operation. This dissertation contributes to the development of real-time techniques, for wide-area monitoring and secure real-time control and operation of hybrid power systems. ^ To handle the increased level of real-time data exchange, this dissertation develops a supervisory control and data acquisition (SCADA) system that is equipped with a state estimation scheme from the real-time data. This system is verified on a specially developed laboratory-based test bed facility, as a hardware and software platform, to emulate the actual scenarios of a real hybrid power system with the highest level of similarities and capabilities to practical utility systems. It includes phasor measurements at hundreds of measurement points on the system. These measurements were obtained from especially developed laboratory based Phasor Measurement Unit (PMU) that is utilized in addition to existing commercially based PMU’s. The developed PMU was used in conjunction with the interconnected system along with the commercial PMU’s. The tested studies included a new technique for detecting the partially islanded micro grids in addition to several real-time techniques for synchronization and parameter identifications of hybrid systems. ^ Moreover, due to numerous integration of renewable energy resources through DC microgrids, this dissertation performs several practical cases for improvement of interoperability of such systems. Moreover, increased number of small and dispersed generating stations and their need to connect fast and properly into the AC grids, urged this work to explore the challenges that arise in synchronization of generators to the grid and through introduction of a Dynamic Brake system to improve the process of connecting distributed generators to the power grid.^ Real time operation and control requires data communication security. A research effort in this dissertation was developed based on Trusted Sensing Base (TSB) process for data communication security. The innovative TSB approach improves the security aspect of the power grid as a cyber-physical system. It is based on available GPS synchronization technology and provides protection against confidentiality attacks in critical power system infrastructures. ^

Effect of performance feedback on perceived knowledge and likelihood to pursue continuing education

The purpose of this study was to assess the effect of performance feedback on Athletic Trainers’ (ATs) perceived knowledge (PK) and likelihood to pursue continuing education (CE). The investigation was grounded in the theories of “the definition of the situation” (Thomas & Thomas, 1928) and the “illusion of knowing,” (Glenberg, Wilkinson, & Epstein, 1982) suggesting that PK drives behavior. This investigation measured the degree to which knowledge gap predicted CE seeking behavior by providing performance feedback designed to change PK. A pre-test post-test control-group design was used to measure PK and likelihood to pursue CE before and after assessing actual knowledge. ATs (n=103) were randomly sampled and assigned to two groups, with and without performance feedback. Two independent samples t-tests were used to compare groups on the difference scores of the dependent variables. Likelihood to pursue CE was predicted by three variables using multiple linear regression: perceived knowledge, pre-test likelihood to pursue CE, and knowledge gap. There was a 68.4% significant difference (t101=2.72, p=0.01, ES=0.45) between groups in the change scores for likelihood to pursue CE because of the performance feedback (Experimental group=13.7% increase; Control group=4.3% increase). The strongest relationship among the dependent variables was between pre-test and post-test measures of likelihood to pursue CE (F2,102=56.80, p<0.01, r=0.73, R2=0.53). The pre- and post-test predictive relationship was enhanced when group was included in the model. In this model [YCEpost=0.76XCEpre-0.34 Xgroup+2.24+E], group accounted for a significant amount of unique variance in predicting CE while the pre-test likelihood to pursue CE variable was held constant (F3,102=40.28, p<0.01, r=0.74, R2=0.55). Pre-test knowledge gap, regardless of group allocation, was a linear predictor of the likelihood to pursue CE (F1,102=10.90, p=.01, r=.31, R2=.10). In this investigation, performance feedback significantly increased participants’ likelihood to pursue CE. Pre-test knowledge gap was a significant predictor of likelihood to pursue CE, regardless if performance feedback was provided. ATs may have self-assessed and engaged in internal feedback as a result of their test-taking experience. These findings indicate that feedback, both internal and external, may be necessary to trigger CE seeking behavior.

Parameter optimization for noise and vibration reduction associated with position and speed sensorless control of permanent magnet machines at low speed

With the advantages and popularity of Permanent Magnet (PM) motors due to their high power density, there is an increasing incentive to use them in variety of applications including electric actuation. These applications have strict noise emission standards. The generation of audible noise and associated vibration modes are characteristics of all electric motors, it is especially problematic in low speed sensorless control rotary actuation applications using high frequency voltage injection technique. This dissertation is aimed at solving the problem of optimizing the sensorless control algorithm for low noise and vibration while achieving at least 12 bit absolute accuracy for speed and position control. The low speed sensorless algorithm is simulated using an improved Phase Variable Model, developed and implemented in a hardware-in-the-loop prototyping environment. Two experimental testbeds were developed and built to test and verify the algorithm in real time.^ A neural network based modeling approach was used to predict the audible noise due to the high frequency injected carrier signal. This model was created based on noise measurements in an especially built chamber. The developed noise model is then integrated into the high frequency based sensorless control scheme so that appropriate tradeoffs and mitigation techniques can be devised. This will improve the position estimation and control performance while keeping the noise below a certain level. Genetic algorithms were used for including the noise optimization parameters into the developed control algorithm.^ A novel wavelet based filtering approach was proposed in this dissertation for the sensorless control algorithm at low speed. This novel filter was capable of extracting the position information at low values of injection voltage where conventional filters fail. This filtering approach can be used in practice to reduce the injected voltage in sensorless control algorithm resulting in significant reduction of noise and vibration.^ Online optimization of sensorless position estimation algorithm was performed to reduce vibration and to improve the position estimation performance. The results obtained are important and represent original contributions that can be helpful in choosing optimal parameters for sensorless control algorithm in many practical applications.^

Informational effects of assessment feedback

This study tested the effects of informational assessment feedback on satisfaction, selfesteem and examiner ratings. 83 participants completed a self-report personality inventory (Millon Index of Personality Styles). Participants of the experimental group were given standardized, informational assessment. Participants in the control group received only general information about the personality inventory. Significant group differences were found for the Feedback Assessment Questionnaire with t (81) = 11.67, p

Effect of Performance Feedback on Perceived Knowledge and Likelihood to Pursue Continuing Education

The purpose of this study was to assess the effect of performance feedback on Athletic Trainers’ (ATs) perceived knowledge (PK) and likelihood to pursue continuing education (CE). The investigation was grounded in the theories of “the definition of the situation” (Thomas & Thomas, 1928) and the “illusion of knowing,” (Glenberg, Wilkinson, & Epstein, 1982) suggesting that PK drives behavior. This investigation measured the degree to which knowledge gap predicted CE seeking behavior by providing performance feedback designed to change PK. A pre-test post-test control-group design was used to measure PK and likelihood to pursue CE before and after assessing actual knowledge. ATs (n=103) were randomly sampled and assigned to two groups, with and without performance feedback. Two independent samples t-tests were used to compare groups on the difference scores of the dependent variables. Likelihood to pursue CE was predicted by three variables using multiple linear regression: perceived knowledge, pre-test likelihood to pursue CE, and knowledge gap. There was a 68.4% significant difference (t101= 2.72, p=0.01, ES=0.45) between groups in the change scores for likelihood to pursue CE because of the performance feedback (Experimental group=13.7% increase; Control group= 4.3% increase). The strongest relationship among the dependent variables was between pre-test and post-test measures of likelihood to pursue CE (F2,102=56.80, p<0.01, r=0.73, R2=0.53). The pre- and post-test predictive relationship was enhanced when group was included in the model. In this model [YCEpost=0.76XCEpre-0.34 Xgroup+2.24+E], group accounted for a significant amount of unique variance in predicting CE while the pre-test likelihood to pursue CE variable was held constant (F3,102=40.28, p<0.01,: r=0.74, R2=0.55). Pre-test knowledge gap, regardless of group allocation, was a linear predictor of the likelihood to pursue CE (F1,102=10.90, p=.01, r=.31, R2=.10). In this investigation, performance feedback significantly increased participants’ likelihood to pursue CE. Pre-test knowledge gap was a significant predictor of likelihood to pursue CE, regardless if performance feedback was provided. ATs may have self-assessed and engaged in internal feedback as a result of their test-taking experience. These findings indicate that feedback, both internal and external, may be necessary to trigger CE seeking behavior.