Tin oxide based composites derived using electrostatic spray deposition technique as anodes for lithium-ion batteries

Recent advances in the electric & hybrid electric vehicles and rapid developments in the electronic devices have increased the demand for high power and high energy density lithium ion batteries. Graphite (theoretical specific capacity: 372 mAh/g) used in commercial anodes cannot meet these demands. Amorphous SnO2 anodes (theoretical specific capacity: 781 mAh/g) have been proposed as alternative anode materials. But these materials have poor conductivity, undergo a large volume change during charging and discharging, large irreversible capacity loss leading to poor cycle performances. To solve the issues related to SnO2 anodes, we propose to synthesize porous SnO2 composites using electrostatic spray deposition technique. First, porous SnO2/CNT composites were fabricated and the effects of the deposition temperature (200, 250, 300 °C) & CNT content (10, 20, 30, 40 wt %) on the electrochemical performance of the anodes were studied. Compared to pure SnO2 and pure CNT, the composite materials as anodes showed better discharge capacity and cyclability. 30 wt% CNT content and 250 °C deposition temperature were found to be the optimal conditions with regard to energy capacity whereas the sample with 20% CNT deposited at 250 °C exhibited good capacity retention. This can be ascribed to the porous nature of the anodes and the improvement in the conductivity by the addition of CNT. Electrochemical impedance spectroscopy studies were carried out to study in detail the change in the surface film resistance with cycling. By fitting EIS data to an equivalent circuit model, the values of the circuit components, which represent surface film resistance, were obtained. The higher the CNT content in the composite, lower the change in surface film resistance at certain voltage upon cycling. The surface resistance increased with the depth of discharge and decreased slightly at fully lithiated state. Graphene was also added to improve the performance of pure SnO2 anodes. The composites heated at 280 °C showed better energy capacity and energy density. The specific capacities of as deposited and post heat-treated samples were 534 and 737 mAh/g after 70 cycles. At the 70th cycle, the energy density of the composites at 195 °C and 280 °C were 1240 and 1760 Wh/kg, respectively, which are much higher than the commercially used graphite electrodes (37.2–74.4 Wh/kg). Both SnO2/CNTand SnO2/grapheme based composites with improved energy densities and capacities than pure SnO2 can make a significant impact on the development of new batteries for electric vehicles and portable electronics applications.

Synthesis and electron emission properties of aligned carbon nanotube arrays

Carbon nanotubes (CNTs) have become one of the most interesting allotropes of carbon due to their intriguing mechanical, electrical, thermal and optical properties. The synthesis and electron emission properties of CNT arrays have been investigated in this work. Vertically aligned CNTs of different densities were synthesized on copper substrate with catalyst dots patterned by nanosphere lithography. The CNTs synthesized with catalyst dots patterned by spheres of 500 nm diameter exhibited the best electron emission properties with the lowest turn-on/threshold electric fields and the highest field enhancement factor. Furthermore, CNTs were treated with NH3 plasma for various durations and the optimum enhancement was obtained for a plasma treatment of 1.0 min. CNT point emitters were also synthesized on a flat-tip or a sharp-tip to understand the effect of emitter geometry on the electron emission. The experimental results show that electron emission can be enhanced by decreasing the screening effect of the electric field by neighboring CNTs. In another part of the dissertation, vertically aligned CNTs were synthesized on stainless steel (SS) substrates with and without chemical etching or catalyst deposition. The density and length of CNTs were determined by synthesis time. For a prolonged growth time, the catalyst activity terminated and the plasma started etching CNTs destructively. CNTs with uniform diameter and length were synthesized on SS substrates subjected to chemical etching for a period of 40 minutes before the growth. The direct contact of CNTs with stainless steel allowed for the better field emission performance of CNTs synthesized on pristine SS as compared to the CNTs synthesized on Ni/Cr coated SS. Finally, fabrication of large arrays of free-standing vertically aligned CNT/SnO2 core-shell structures was explored by using a simple wet-chemical route. The structure of the SnO2 nanoparticles was studied by X-ray diffraction and electron microscopy. Transmission electron microscopy reveals that a uniform layer of SnO2 is conformally coated on every tapered CNT. The strong adhesion of CNTs with SS guaranteed the formation of the core-shell structures of CNTs with SnO2 or other metal oxides, which are expected to have applications in chemical sensors and lithium ion batteries.

Acceptable vs. marginal police officers' psychological ratings : a longitudinal comparison of job performance

Archival research was conducted on the inception of preemployment psychological testing, as part of the background screening process, to select police officers for a local police department. Various issues and incidents were analyzed to help explain why this police department progressed from an abbreviated version of a psychological battery, to a much more sophisticated and comprehensive set of instruments. While doubts about psychological exams do exist, research has shown that many are valid and reliable in predicting job performance of police candidates. During a three year period, a police department hired 162 candidates (133 males and 29 females) who received "acceptable" psychological ratings and 71 candidates (58 males and 13 females) who received "marginal" psychological ratings. A document analysis consisted of variables that have been identified as job performance indicators which police psychological testing tries to predict, and "screen in" or "screen out" appropriate applicants. The areas of focus comprised the 6-month police academy, the 4-month Field Training Officer (FTO) Program, the remaining probationary period, and yearly performance up to five years of employment. Specific job performance variables were the final academy grade average, supervisors' evaluation ratings, reprimands, commendations, awards, citizen complaints, time losses, sick time usage, reassignments, promotions, and separations. A causal-comparative research design was used to determine if there were significant statistical differences in these job performance variables between police officers with "acceptable" psychological ratings and police officers with "marginal" psychological ratings. The results of multivariate analyses of variance, t-tests, and chi-square procedures as applicable, showed no significant differences between the two groups on any of the job performance variables.

Overweight/Obesity and HIV Disease Progression in HIV+ Adults in Botswana

Studies indicate that overweight and obesity protect against HIV-disease progression in antiretroviral therapy (ART)-naïve patients. We examined retrospectively the relationship of overweight/obesity with HIV-disease progression in ART-naïve HIV+ adults in Botswana in a case-control study with 18-month follow-up, which included 217 participants, 139 with BMI 18.0-24.9 kg/m2 and 78 with BMI ≥25 kg/m2. Archived plasma samples were used to determine inflammatory markers: leptin and bacterial endotoxin lipopolysaccharide (LPS), and genotype single nucleotide polymorphisms (SNPs) of the Fat Mass and Obesity Associated Gene (FTO). At baseline, BMI was inversely associated with risk for AIDS-defining conditions (HR=0.218; 95%CI=0.068, 0.701, P=0.011), and higher fat mass was associated with reduced risk of the combined outcome of CD4+cell count ≤250/µL and AIDS-defining conditions, whichever occurred earlier (HR=0.918; 95%CI=0.847, 0.994, P=0.036) over 18 months, adjusting for age, gender, marriage, children, and baseline CD4+cell count and HIV-viral load. FTO-SNP rs17817449 was associated with BMI (OR=1.082; 95%CI=1.001, 1.169; P=0.047). Fat mass was associated with the risk alleles of rs1121980 (OR=1.065; 95%CI=1.009, 1.125, P=0.021), rs8050136 (OR=1.078; 95%CI=1.021, 1.140; P=0.007), and rs17817449 (OR=1.086; 95%CI=1.031, 1.145; P=0.002), controlling for age, gender, tribe, total energy intake, and activity. There were no associations of SNPs with markers of disease progression. Leptin levels were positively associated with BMI (β=1.764; 95%CI=0.788, 2.739; P=0.022) and fat mass (β=0.112; 95%CI=0.090, 0.135; P<0.001), but inversely with viral load (β=-0.305; 95%CI=-0.579, -.031; P=0.030). LPS levels were inversely associated with BMI (OR=0.790, 95%CI=0.630, 0.990; P=0.041), and fat mass (OR=0.852, 95%CI=0.757, 0.958; P=0.007) and directly with viral load (OR=2.608, 95%CI=1.111, 6.124; P=0.028), adjusting for age, gender, smoking and %fat mass. In this cohort, overweight/obesity predicted slower HIV-disease progression. Obesity may confer an advantage in maintaining fat stores to support the overactive immune system. FTO-SNPs may contribute to the variation in fat mass; however, they were not associated with HIV-disease progression. Our findings suggest that the obesity paradox may be explained by the association of increased LPS with lower BMI and higher viral load; while viral load decreased with increasing leptin levels. Studies in African populations are needed to clarify whether genetic variation and inflammation mediate the obesity paradox in HIV-disease progression.

Tin Oxide Based Composites Derived Using Electrostatic Spray Deposition Technique as Anodes for Li-Ion Batteries

Recent advances in the electric & hybrid electric vehicles and rapid developments in the electronic devices have increased the demand for high power and high energy density lithium ion batteries. Graphite (theoretical specific capacity: 372 mAh/g) used in commercial anodes cannot meet these demands. Amorphous SnO2 anodes (theoretical specific capacity: 781 mAh/g) have been proposed as alternative anode materials. But these materials have poor conductivity, undergo a large volume change during charging and discharging, large irreversible capacity loss leading to poor cycle performances. To solve the issues related to SnO2 anodes, we propose to synthesize porous SnO2 composites using electrostatic spray deposition technique. First, porous SnO2/CNT composites were fabricated and the effects of the deposition temperature (200,250, 300 oC) & CNT content (10, 20, 30, 40 wt %) on the electrochemical performance of the anodes were studied. Compared to pure SnO2 and pure CNT, the composite materials as anodes showed better discharge capacity and cyclability. 30 wt% CNT content and 250 oC deposition temperature were found to be the optimal conditions with regard to energy capacity whereas the sample with 20% CNT deposited at 250 oC exhibited good capacity retention. This can be ascribed to the porous nature of the anodes and the improvement in the conductivity by the addition of CNT. Electrochemical impedance spectroscopy studies were carried out to study in detail the change in the surface film resistance with cycling. By fitting EIS data to an equivalent circuit model, the values of the circuit components, which represent surface film resistance, were obtained. The higher the CNT content in the composite, lower the change in surface film resistance at certain voltage upon cycling. The surface resistance increased with the depth of discharge and decreased slightly at fully lithiated state. Graphene was also added to improve the performance of pure SnO2 anodes. The composites heated at 280 oC showed better energy capacity and energy density. The specific capacities of as deposited and post heat-treated samples were 534 and 737 mAh/g after 70 cycles. At the 70th cycle, the energy density of the composites at 195 °C and 280 °C were 1240 and 1760 Wh/kg, respectively, which are much higher than the commercially used graphite electrodes (37.2-74.4 Wh/kg). Both SnO2/CNTand SnO2/grapheme based composites with improved energy densities and capacities than pure SnO2 can make a significant impact on the development of new batteries for electric vehicles and portable electronics applications.

Overweight/obesity and HIV disease progression in HIV+ adults in Botswana

Studies indicate that overweight and obesity protect against HIV-disease progression in antiretroviral therapy (ART)-naïve patients. We examined retrospectively the relationship of overweight/obesity with HIV-disease progression in ART-naïve HIV+ adults in Botswana in a case-control study with 18-month follow-up, which included 217 participants, 139 with BMI 18.0-24.9 kg/m 2 and 78 with BMI ≥25 kg/m2. Archived plasma samples were used to determine inflammatory markers: leptin and bacterial endotoxin lipopolysaccharide (LPS), and genotype single nucleotide polymorphisms (SNPs) of the Fat Mass and Obesity Associated Gene (FTO). ^ At baseline, BMI was inversely associated with risk for AIDS-defining conditions (HR=0.218; 95%CI=0.068, 0.701, P=0.011), and higher fat mass was associated with reduced risk of the combined outcome of CD4+cell count ≤250/µL and AIDS-defining conditions, whichever occurred earlier (HR=0.918; 95%CI=0.847, 0.994, P=0.036) over 18 months, adjusting for age, gender, marriage, children, and baseline CD4+cell count and HIV-viral load. ^ FTO-SNP rs17817449 was associated with BMI (OR=1.082; 95%CI=1.001, 1.169; P=0.047). Fat mass was associated with the risk alleles of rs1121980 (OR=1.065; 95%CI=1.009, 1.125, P=0.021), rs8050136 (OR=1.078; 95%CI=1.021, 1.140; P=0.007), and rs17817449 (OR=1.086; 95%CI=1.031, 1.145; P=0.002), controlling for age, gender, tribe, total energy intake, and activity. There were no associations of SNPs with markers of disease progression. ^ Leptin levels were positively associated with BMI (β=1.764; 95%CI=0.788, 2.739; P=0.022) and fat mass (β=0.112; 95%CI=0.090, 0.135; P<0.001), but inversely with viral load (β=-0.305; 95%CI=-0.579, -.031; P=0.030). LPS levels were inversely associated with BMI (OR=0.790, 95%CI=0.630, 0.990; P=0.041), and fat mass (OR=0.852, 95%CI=0.757, 0.958; P=0.007) and directly with viral load (OR=2.608, 95%CI=1.111, 6.124; P=0.028), adjusting for age, gender, smoking and %fat mass. ^ In this cohort, overweight/obesity predicted slower HIV-disease progression. Obesity may confer an advantage in maintaining fat stores to support the overactive immune system. FTO-SNPs may contribute to the variation in fat mass; however, they were not associated with HIV-disease progression. Our findings suggest that the obesity paradox may be explained by the association of increased LPS with lower BMI and higher viral load; while viral load decreased with increasing leptin levels. Studies in African populations are needed to clarify whether genetic variation and inflammation mediate the obesity paradox in HIV-disease progression.^