A Serological and Disc Electrophoretic Study of North American Typha

Pollen and seed proteins of seven selected North American and Puerto Rican Typha populations were compared using two serological methods and disc electrophoresis. These methods were capable of discriminating among all taxa studied: Typha latifolia, T. angustifolia, T. X glauca, and T. domingensis. The two hybrid populations were found to contain proteins not found in either parent. Typha domingensis was serologically the most distinct of the four taxa. The diagnostic morphological characteristics for Typha species were studied in all populations, and statistical comparisons are presented. Data from the morphological observations agreed with the information obtained from the chemosystematic research. All data indicate that the three taxa should be maintained as separate species. The hybrid nature of the putative T. X glauca is verified by both the biochemical and morphological data. Observed morphological and biochemical differences support taxonomic treatments in which T. domingensis is designated as a separate species.

Microvariation at the human D1S80 locus

Microvariant allelic polymorphisms have been known since 1966 when Harris, Hubby and Lewontin described the huge store of genetic variation detectable at the polypeptide level. Later Jeffreys used MVR (minisatellite variant repeat) analysis to describe the variation hidden within minisatellite VNTRs and to propose a mutational mechanism.^ The questions I have asked follow these traditions: (1) How much microvariant polymorphism exists at the discrete allele minisatellite D1S80 locus? (2) Do alleles or groups of alleles associate randomly with the flanking markers to form haplotypes? (3) What mechanisms might explain mutations at this locus? What are the phylogenetic relationships among the alleles?^ The minisatellite locus D1S80 (1p35-36), GenBank sequence (Accession # D28507), is a highly polymorphic Variable Number of Tandem Repeat (VNTR) based on a 16 base core. D1S80 alleles are electrophoretically separable into discontinuous sets of equivalent length alleles. Sequence variation or minor length variation within these classes was expected: I have sought to determine the nature of this microvariant heterogeneity by sequencing nominal and variant alleles.^ Alleles were analyzed by Single-Strand Conformation Polymorphism (SSCP) analysis. Sequences were determined to ascertain whether sequence variation or size variation is the major cause of altered electrophoretic migration of microvariant D1S80 alleles. Twenty three alleles from 14 previously typed individuals were sequenced. The individuals were from African American, Caucasian, or Hispanic databases.^ A Tsp509 I restriction site, previously reported as a Hinf I flanking polymorphism, and a 3$\sp\prime$ flanking region BsoF I restriction site polymorphism were identified. There appears to be a strong association of the 5$\sp\prime$ flanking region Hinf I(+) and Tsp509 I(-) site and the 3$\sp\prime$ flanking region BsoF I(-) site with the 18 allele, while the 24 tends to be associated with the Hinf I(-), Tsp509 I(+) and BsoF I(+) sites.^ The general conclusion for this locus is clearly the closer you look, the more you find. D1S80 allelic polymorphisms are primarily due to variation in the number of repeat units and to sequence variation among repeats. The sequenced based gene tree depicts two major classes of alleles which conform to the two most common alleles, reflecting either equivalent age or population size bottlenecks. ^

Rapid inline derivatization of primary and secondary amine containing drugs by capillary electrophoresis with laser-induced fluorescence

Despite the ongoing "war on drugs" the seizure rates for phenethylamines and their analogues have been steadily increasing over the years. The illicit manufacture of these compounds has become big business all over the world making it all the more attractive to the inexperienced "cook". However, as a result, the samples produced are more susceptible to contamination with reactionary byproducts and leftover reagents. These impurities are useful in the analysis of seized drugs as their identities can help to determine the synthetic pathway used to make these drugs and thus, the provenance of these analytes. In the present work two fluorescent dyes, 4-fluoro-7-nitrobenzofurazan and 5-(4,6-dichlorotriazinyl)aminofluorescein, were used to label several phenethylamine analogues for electrophoretic separation with laser-induced fluorescence detection. The large scale to which law enforcement is encountering these compounds has the potential to create a tremendous backlog. In order to combat this, a rapid, sensitive method capable of full automation is required. Through the utilization of the inline derivatization method developed whereby analytes are labeled within the capillary efficiently in a minimum span of time, this can be achieved. The derivatization and separation parameters were optimized on the basis of a variety of experimentally determined factors in order to give highly resolved peaks in the fluorescence spectrum with limits of detection in the low µg/mL range.

The effect of weathering processes on the vertical turbulent dispersion characteristics of crude oil spilled on the sea

Since the Exxon Valdez accident in 1987, renewed interest has come forth to better understand and predict the fate and transport of crude oil lost to marine environments. The short-term fate of an Arabian Crude oil was simulated in laboratory experiments using artificial seawater. The time-dependent changes in the rheological and chemical properties of the oil under the influence of natural weathering processes were characterized, including dispersion behavior of the oil under simulated ocean turbulence. Methodology included monitoring the changes in the chemical composition of the oil by Gas Chromatography/Mass Spectrometry (GCMS), toxicity evaluations for the oil dispersions by Microtox analysis, and quantification of dispersed soluble aromatics by fluorescence spectrometry. Results for this oil show a sharp initial increase in viscosity, due to evaporative losses of lower molecular weight hydrocarbons, with the formation of stable water-in-oil emulsions occurring within one week. Toxicity evaluations indicate a decreased EC-50 value (higher toxicity) occurring after the oil has weathered eight hours, with maximum toxicity being observed after weathering seven days. Particle charge distributions, determined by electrophoretic techniques using a Coulter DELSA 440, reveal that an unstable oil dispersion exists within the size range of 1.5 to 2.5 um, with recombination processes being observed between sequential laser runs of a single sample.

Preparation of an Immunosorbent and its use in the Solid Phase Extraction of Benzodiazepines

The use of capillary electrophoresis (CE) has been restricted to applications having high sample concentrations because of its low sensitivity caused by small injection volumes and, when ultraviolet (UV) detection is used, the short optical path length. Sensitivity in CE can be improved by using more sensitive detection systems, or by preconcentration techniques which are based on chromatographic and/or electrophoretic principles. One of the promising strategies to improve sensitivity is solid phase extraction (SPE). Solid Phase Extraction utilizes high sample volumes and a variety of complex matrixes to facilitate trace detection. To increase the specificity of the SPE a selective solid phase must be chosen. Immunosorbents, which are a combination of an antibody and a solid support, have proven to be an excellent option because of high selectivity of the antibody. This thesis is an exploratory study of the application of immunosorbent-SPE combined with CE for trace concentration of benzodiazepines. This research describes the immobilization and performance evaluation of an immunosorbent prepared by immobilizing a benzodiazepine-specific antibody on aminopropyl silica. The binding capacity of the immunosorbent, measured as µg of benzodiazepine/ gram of immunosorbent, was 39 ± 10. The long term stability of the prepared immunosorbent has been improved by capping the remaining aminopropyl groups by reaction with acetic anhydride. The capped immunosorbent retained its binding capacity after several uses.

Electrochemical Immunosensing of Cortisol in an Automated Microfluidic System Towards Point-of-Care Applications

This dissertation describes the development of a label-free, electrochemical immunosensing platform integrated into a low-cost microfluidic system for the sensitive, selective and accurate detection of cortisol, a steroid hormone co-related with many physiological disorders. Abnormal levels of cortisol is indicative of conditions such as Cushing’s syndrome, Addison’s disease, adrenal insufficiencies and more recently post-traumatic stress disorder (PTSD). Electrochemical detection of immuno-complex formation is utilized for the sensitive detection of Cortisol using Anti-Cortisol antibodies immobilized on sensing electrodes. Electrochemical detection techniques such as cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) have been utilized for the characterization and sensing of the label-free detection of Cortisol. The utilization of nanomaterial’s as the immobilizing matrix for Anti-cortisol antibodies that leads to improved sensor response has been explored. A hybrid nano-composite of Polyanaline-Ag/AgO film has been fabricated onto Au substrate using electrophoretic deposition for the preparation of electrochemical immunosening of cortisol. Using a conventional 3-electrode electrochemical cell, a linear sensing range of 1pM to 1µM at a sensitivity of 66µA/M and detection limit of 0.64pg/mL has been demonstrated for detection of cortisol. Alternately, a self-assembled monolayer (SAM) of dithiobis(succinimidylpropionte) (DTSP) has been fabricated for the modification of sensing electrode to immobilize with Anti-Cortisol antibodies. To increase the sensitivity at lower detection limit and to develop a point-of-care sensing platform, the DTSP-SAM has been fabricated on micromachined interdigitated microelectrodes (µIDE). Detection of cortisol is demonstrated at a sensitivity of 20.7µA/M and detection limit of 10pg/mL for a linear sensing range of 10pM to 200nM using the µIDE’s. A simple, low-cost microfluidic system is designed using low-temperature co-fired ceramics (LTCC) technology for the integration of the electrochemical cortisol immunosensor and automation of the immunoassay. For the first time, the non-specific adsorption of analyte on LTCC has been characterized for microfluidic applications. The design, fabrication technique and fluidic characterization of the immunoassay are presented. The DTSP-SAM based electrochemical immunosensor on µIDE is integrated into the LTCC microfluidic system and cortisol detection is achieved in the microfluidic system in a fully automated assay. The fully automated microfluidic immunosensor hold great promise for accurate, sensitive detection of cortisol in point-of-care applications.