Evaluation of wind-induced internal pressure in low-rise buildings: A multi scale experimental and numerical approach

Hurricane is one of the most destructive and costly natural hazard to the built environment and its impact on low-rise buildings, particularity, is beyond acceptable. The major objective of this research was to perform a parametric evaluation of internal pressure (IP) for wind-resistant design of low-rise buildings and wind-driven natural ventilation applications. For this purpose, a multi-scale experimental, i.e. full-scale at Wall of Wind (WoW) and small-scale at Boundary Layer Wind Tunnel (BLWT), and a Computational Fluid Dynamics (CFD) approach was adopted. This provided new capability to assess wind pressures realistically on internal volumes ranging from small spaces formed between roof tiles and its deck to attic to room partitions. Effects of sudden breaching, existing dominant openings on building envelopes as well as compartmentalization of building interior on the IP were systematically investigated. Results of this research indicated: (i) for sudden breaching of dominant openings, the transient overshooting response was lower than the subsequent steady state peak IP and internal volume correction for low-wind-speed testing facilities was necessary. For example a building without volume correction experienced a response four times faster and exhibited 30–40% lower mean and peak IP; (ii) for existing openings, vent openings uniformly distributed along the roof alleviated, whereas one sided openings aggravated the IP; (iii) larger dominant openings exhibited a higher IP on the building envelope, and an off-center opening on the wall exhibited (30–40%) higher IP than center located openings; (iv) compartmentalization amplified the intensity of IP and; (v) significant underneath pressure was measured for field tiles, warranting its consideration during net pressure evaluations. The study aimed at wind driven natural ventilation indicated: (i) the IP due to cross ventilation was 1.5 to 2.5 times higher for Ainlet/Aoutlet>1 compared to cases where Ainlet/Aoutlet<1, this in effect reduced the mixing of air inside the building and hence the ventilation effectiveness; (ii) the presence of multi-room partitioning increased the pressure differential and consequently the air exchange rate. Overall good agreement was found between the observed large-scale, small-scale and CFD based IP responses. Comparisons with ASCE 7-10 consistently demonstrated that the code underestimated peak positive and suction IP.

Wage matters & globalization: South Florida's low-wage immigrant plant nursery workers and business protectionism in the age of neoliberalism

Ornamental plant production in the State of Florida is an anomaly with respect to current theories of globalization and particularly their explanation of the employment of low-wage, immigrant labor. Those theories dictate that unskilled jobs that do not need to be performed within highly developed countries are outsourced to where labor is cheaper and more flexible. However, the State of Florida remains an important site of ornamental plant production in the US amidst a global economic environment of outsourcing and transnational corporate expansion. This dissertation relies on 50 semi-structured interviews with insiders of the Florida plant nursery industry, focus groups, and participant observation to explain how US trade, labor, and migration policy-making at local levels are not removed from larger global processes taking place in the world since the 1970s. In Florida, elite market players of the plant nursery industry have been able to resist global trends in free trade, operating instead in a protected market. They have done this by appealing to scientific justifications and through arbitrary implementations of neoliberal ideology that keeps small and middle range business alive, while maintaining a seemingly endless supply of marginalized and exploited low-wage, immigrant workers.^

Modeling, simulation, and characterization of space debris in low-Earth orbit

Every space launch increases the overall amount of space debris. Satellites have limited awareness of nearby objects that might pose a collision hazard. Astrometric, radiometric, and thermal models for the study of space debris in low-Earth orbit have been developed. This modeled approach proposes analysis methods that provide increased Local Area Awareness for satellites in low-Earth and geostationary orbit. Local Area Awareness is defined as the ability to detect, characterize, and extract useful information regarding resident space objects as they move through the space environment surrounding a spacecraft. The study of space debris is of critical importance to all space-faring nations. Characterization efforts are proposed using long-wave infrared sensors for space-based observations of debris objects in low-Earth orbit. Long-wave infrared sensors are commercially available and do not require solar illumination to be observed, as their received signal is temperature dependent. The characterization of debris objects through means of passive imaging techniques allows for further studies into the origination, specifications, and future trajectory of debris objects. Conclusions are made regarding the aforementioned thermal analysis as a function of debris orbit, geometry, orientation with respect to time, and material properties. Development of a thermal model permits the characterization of debris objects based upon their received long-wave infrared signals. Information regarding the material type, size, and tumble-rate of the observed debris objects are extracted. This investigation proposes the utilization of long-wave infrared radiometric models of typical debris to develop techniques for the detection and characterization of debris objects via signal analysis of unresolved imagery. Knowledge regarding the orbital type and semi-major axis of the observed debris object are extracted via astrometric analysis. This knowledge may aid in the constraint of the admissible region for the initial orbit determination process. The resultant orbital information is then fused with the radiometric characterization analysis enabling further characterization efforts of the observed debris object. This fused analysis, yielding orbital, material, and thermal properties, significantly increases a satellite's Local Area Awareness via an intimate understanding of the debris environment surrounding the spacecraft.

The Maintenance and Consequences of a Low Quality Diet in Poecilia Latipinna

The adaptive significance of herbivory in nature is not well understood. In order to document the conditions that select for an herbivorous feeding habit, we must first understand how such a diet is maintained, and the consequences of doing so. A few studies have begun to reveal mechanisms of maintaining herbivory (i.e. selective feeding, diet mixing, etc.) and the associated life history responses (i.e. growth, reproduction, etc.) in terrestrial and marine systems; however, studies of this kind are underrepresented in the freshwater literature. In this study, I use the sailfin molly (Poecilia latipinna) as a model organism to examine diet selectivity and the effects of an herbivorous diet on growth. To study food selectivity, sailfin mollies were fed either disturbed or intact periphyton mats from one of three localities within the Everglades (Water Conservation Area 3B, the Gap, or Chekika). Mats are structured with palatable algal species (i.e. greens and diatoms) comprising the inner components of the mat, and unpalatable species (i.e. cyanobacteria) comprising the outer edges. Fish gut contents were analyzed for each treatment and periphyton locality. Results suggest that when provided access to the inner components of the mats, fish preferentially eat more palatable algae. In a second experiment, effects of an herbivorous diet were examined using neonate sailfin mollies. Fish were fed either commercial food flakes, commercial algae flakes, or ground periphyton, and growth rate was measured weekly, from birth to 21 days. Fish fed the commercial diets grew at a faster rate and reached a larger final size than those fed periphyton. These results suggest that a periphyton diet is limited in nutritional elements compared to a pure algae diet and herbivorous organisms feeding upon it may experience negative effects on growth. By studying the costs and benefits of herbivory in a freshwater system, this paper contributes to a larger study of the question of why herbivory would evolve as an adaptation when seemingly inefficient compared to carnivorous and omnivorous diets.

Design and analysis of micro-channel heat-exchanger embedded in Low Temperature Co-fire Ceramic (LTCC)

Increased device density, switching speeds of integrated circuits and decrease in package size is placing new demands for high power thermal-management. The convectional method of forced air cooling with passive heat sink can handle heat fluxes up-to 3-5W/cm2; however current microprocessors are operating at levels of 100W/cm2, This demands the usage of novel thermal-management systems. In this work, water-cooling systems with active heat sink are embedded in the substrate. The research involved fabricating LTCC substrates of various configurations - an open-duct substrate, the second with thermal vias and the third with thermal vias and free-standing metal columns and metal foil. Thermal testing was performed experimentally and these results are compared with CFD results. An overall thermal resistance for the base substrate is demonstrated to be 3.4oC/W-cm2. Addition of thermal vias reduces the effective resistance of the system by 7times and further addition of free standing columns reduced it by 20times.

Wage Matters & Globalization: South Florida’s Low-Wage Immigrant Plant Nursery Workers and Business Protectionism in the Age of Neoliberalism

Ornamental plant production in the State of Florida is an anomaly with respect to current theories of globalization and particularly their explanation of the employment of low-wage, immigrant labor. Those theories dictate that unskilled jobs that do not need to be performed within highly developed countries are outsourced to where labor is cheaper and more flexible. However, the State of Florida remains an important site of ornamental plant production in the US amidst a global economic environment of outsourcing and transnational corporate expansion. This dissertation relies on 50 semi-structured interviews with insiders of the Florida plant nursery industry, focus groups, and participant observation to explain how US trade, labor, and migration policy-making at local levels are not removed from larger global processes taking place in the world since the 1970s. In Florida, elite market players of the plant nursery industry have been able to resist global trends in free trade, operating instead in a protected market. They have done this by appealing to scientific justifications and through arbitrary implementations of neoliberal ideology that keeps small and middle range business alive, while maintaining a seemingly endless supply of marginalized and exploited low-wage, immigrant workers.

Modeling, Simulation, and Characterization of Space Debris in low-Earth Orbit

Every space launch increases the overall amount of space debris. Satellites have limited awareness of nearby objects that might pose a collision hazard. Astrometric, radiometric, and thermal models for the study of space debris in low-Earth orbit have been developed. This modeled approach proposes analysis methods that provide increased Local Area Awareness for satellites in low-Earth and geostationary orbit. Local Area Awareness is defined as the ability to detect, characterize, and extract useful information regarding resident space objects as they move through the space environment surrounding a spacecraft. The study of space debris is of critical importance to all space-faring nations. Characterization efforts are proposed using long-wave infrared sensors for space-based observations of debris objects in low-Earth orbit. Long-wave infrared sensors are commercially available and do not require solar illumination to be observed, as their received signal is temperature dependent. The characterization of debris objects through means of passive imaging techniques allows for further studies into the origination, specifications, and future trajectory of debris objects. Conclusions are made regarding the aforementioned thermal analysis as a function of debris orbit, geometry, orientation with respect to time, and material properties. Development of a thermal model permits the characterization of debris objects based upon their received long-wave infrared signals. Information regarding the material type, size, and tumble-rate of the observed debris objects are extracted. This investigation proposes the utilization of long-wave infrared radiometric models of typical debris to develop techniques for the detection and characterization of debris objects via signal analysis of unresolved imagery. Knowledge regarding the orbital type and semi-major axis of the observed debris object are extracted via astrometric analysis. This knowledge may aid in the constraint of the admissible region for the initial orbit determination process. The resultant orbital information is then fused with the radiometric characterization analysis enabling further characterization efforts of the observed debris object. This fused analysis, yielding orbital, material, and thermal properties, significantly increases a satellite’s Local Area Awareness via an intimate understanding of the debris environment surrounding the spacecraft.