9 resultados para Effective notch method
em Digital Commons at Florida International University
Resumo:
This research provides data which investigates the feasibility of using fourth generation evaluation during the process of instruction. A semester length course entitled "Multicultural Communications", (PUR 5406/4934) was designed and used in this study, in response to the need for the communications profession to produce well-trained culturally sensitive practitioners for the work force and the market place. A revised pause model consisting of three one-on-one indepth interviews conducted outside of the class, three reflections periods during the class and a self-reflective essay prepared one week before the end of the course was analyzed. Narrative and graphic summaries of participant responses produced significant results. The revised pause model was found to be an effective evaluation method for use in multicultural education under certain conditions as perceived by the participants in the study. participant self-perceived behavior change and knowledge acquisition was identified through use of the revised pause model. Study results suggest that by using the revised pause model of evaluation, instructors teaching multicultural education in schools of journalism and mass communication is yet another way of enhancing their ability to become both the researcher and the research subject. In addition, the introduction of a qualitative model has been found to be a more useful way of generating participant involvement and introspection. Finally, the instructional design of the course used in the study provides communication educators with a practical way of preparing their students be effective communicators in a multicultural world.
Resumo:
This research investigated the effectiveness and efficiency of structured writing as compared to traditional nonstructured writing as a teaching and learning strategy in a training session for teachers.^ Structured writing is a method of identifying, interrelating, sequencing, and graphically displaying information on fields of a page or computer. It is an alternative for improving training and educational outcomes by providing an effective and efficient documentation methodology.^ The problem focuses upon the contradiction between: (a) the supportive research and theory to modify traditional methods of written documents and information presentation and (b) the existing paradigm to continue with traditional communication methods.^ A MANOVA was used to determine significant difference between a control and an experimental group in a posttest only experimental design. The experimental group received the treatment of structured writing materials during a training session. Two variables were analyzed. They were: (a) effectiveness; correct items on a posttest, and (b) efficiency; time spent on test.^ The quantitative data showed a difference for the experimental group on the two dependent variables. The experimental group completed the posttest in 2 minutes less time while scoring 1.5 more items correct. An interview with the training facilitators revealed that the structured writing materials were "user friendly." ^
Resumo:
The effect of teaching method in physical education is an important issue and has been a concern of the expert teacher. Teachers are expected to create a model of teaching in their field; therefore, it is reasonable to question what is the effect of an alternative teaching method on student performance in physical education. This study explores whether teaching methods with advanced planning, behavior and belief in high enthusiasm, use of instructional strategies and evaluation, together termed a systematic teaching approach, used in a physical education activity would provide an effective environment for learning which supports student achievement in the psychomotor, cognitive, and affective domains. This study also investigated whether there was a difference in performance between students who were taught with a systematic teaching approach and students who were taught with the traditional teaching model. Information was collected using two performance skills, a written test, and one questionnaire. The 68 participants were randomly assigned into either an experimental group or a control group. Two teachers were assigned to either the experimental group or the control group. The teaching experiment took place at Tamsui Oxford University College in Taiwan and lasted eight weeks. ^ Research questions were analyzed using the t-test. Results indicated that a significant difference in students' performance was found between the experimental group and the control group on both the skill tests and the paper test. Analysis of student attitude toward their teacher and their course on the questionnaire indicated a significant difference between the experimental group and the control group. ^ The findings of this study imply that students who were taught with a systematic teaching style were significantly superior to students who were taught with the traditional model on these measures. This finding supports the contention that effective teaching in physical education is related to advanced planning, high enthusiasm, instructional strategy and evaluation and that all physical education teachers should implement these planning elements in the development of the teaching strategies. ^
Resumo:
This dissertation develops a process improvement method for service operations based on the Theory of Constraints (TOC), a management philosophy that has been shown to be effective in manufacturing for decreasing WIP and improving throughput. While TOC has enjoyed much attention and success in the manufacturing arena, its application to services in general has been limited. The contribution to industry and knowledge is a method for improving global performance measures based on TOC principles. The method proposed in this dissertation will be tested using discrete event simulation based on the scenario of the service factory of airline turnaround operations. To evaluate the method, a simulation model of aircraft turn operations of a U.S. based carrier was made and validated using actual data from airline operations. The model was then adjusted to reflect an application of the Theory of Constraints for determining how to deploy the scarce resource of ramp workers. The results indicate that, given slight modifications to TOC terminology and the development of a method for constraint identification, the Theory of Constraints can be applied with success to services. Bottlenecks in services must be defined as those processes for which the process rates and amount of work remaining are such that completing the process will not be possible without an increase in the process rate. The bottleneck ratio is used to determine to what degree a process is a constraint. Simulation results also suggest that redefining performance measures to reflect a global business perspective of reducing costs related to specific flights versus the operational local optimum approach of turning all aircraft quickly results in significant savings to the company. Savings to the annual operating costs of the airline were simulated to equal 30% of possible current expenses for misconnecting passengers with a modest increase in utilization of the workers through a more efficient heuristic of deploying them to the highest priority tasks. This dissertation contributes to the literature on service operations by describing a dynamic, adaptive dispatch approach to manage service factory operations similar to airline turnaround operations using the management philosophy of the Theory of Constraints.
Resumo:
Intraoperative neurophysiologic monitoring is an integral part of spinal surgeries and involves the recording of somatosensory evoked potentials (SSEP). However, clinical application of IONM still requires anywhere between 200 to 2000 trials to obtain an SSEP signal, which is excessive and introduces a significant delay during surgery to detect a possible neurological damage. The aim of this study is to develop a means to obtain the SSEP using a much less, twelve number of recordings. The preliminary step involved was to distinguish the SSEP with the ongoing brain activity. We first establish that the brain activity is indeed quasi-stationary whereas an SSEP is expected to be identical every time a trial is recorded. An algorithm was developed using Chebychev time windowing for preconditioning of SSEP trials to retain the morphological characteristics of somatosensory evoked potentials (SSEP). This preconditioning was followed by the application of a principal component analysis (PCA)-based algorithm utilizing quasi-stationarity of EEG on 12 preconditioned trials. A unique Walsh transform operation was then used to identify the position of the SSEP event. An alarm is raised when there is a 10% time in latency deviation and/or 50% peak-to-peak amplitude deviation, as per the clinical requirements. The algorithm shows consistency in the results in monitoring SSEP in up to 6-hour surgical procedures even under this significantly reduced number of trials. In this study, the analysis was performed on the data recorded in 29 patients undergoing surgery during which the posterior tibial nerve was stimulated and SSEP response was recorded from scalp. This method is shown empirically to be more clinically viable than present day approaches. In all 29 cases, the algorithm takes 4sec to extract an SSEP signal, as compared to conventional methods, which take several minutes. The monitoring process using the algorithm was successful and proved conclusive under the clinical constraints throughout the different surgical procedures with an accuracy of 91.5%. Higher accuracy and faster execution time, observed in the present study, in determining the SSEP signals provide a much improved and effective neurophysiological monitoring process.
Resumo:
In an effort to improve instruction and better accommodate the needs of students, community colleges are offering courses delivered in a variety of delivery formats that require students to have some level of technology fluency to be successful in the course. This study was conducted to investigate the relationship between student socioeconomic status (SES), course delivery method, and course type on enrollment, final course grades, course completion status, and course passing status at a state college. ^ A dataset for 20,456 students of low and not low SES enrolled in science, technology, engineering, and mathematics (STEM) course types delivered using traditional, online, blended, and web enhanced course delivery formats at Miami Dade College, a large open access 4-year state college located in Miami-Dade County, Florida, was analyzed. A factorial ANOVA using course type, course delivery method, and student SES found no significant differences in final course grades when used to determine if course delivery methods were equally effective for students of low and not low SES taking STEM course types. Additionally, three chi-square goodness-of-fit tests were used to investigate for differences in enrollment, course completion and course passing status by SES, course type, and course delivery method. The findings of the chi-square tests indicated that: (a) there were significant differences in enrollment by SES and course delivery methods for the Engineering/Technology, Math, and overall course types but not for the Natural Science course type and (b) there were no significant differences in course completion status and course passing status by SES and course types overall and SES and course delivery methods overall. However, there were statistically significant but weak relationships between course passing status, SES and the math course type as well as between course passing status, SES, and online and traditional course delivery methods. ^ The mixed findings in the study indicate that strides have been made in closing the theoretical gap in education and technology skills that may exist for students of different SES levels. MDC's course delivery and student support models may assist other institutions address student success in courses that necessitate students having some level of technology fluency. ^
Resumo:
Simulations suggest that photomixing in resonant laser-assisted field emission could be used to generate and detect signals from DC to 100 THz. It is the objective of this research to develop a system to efficiently couple the microwave signals generated on an emitting tip by optical mixing. Four different methods for coupling are studied. Tapered Goubau line is found to be the most suitable. Goubau line theory is reviewed, and programs are written to determine loss on the line. From this, Goubau tapers are designed that have a 1:100 bandwidth. These tapers are finally simulated using finite difference time domain, to find the optimum design parameters. Tapered Goubau line is an effective method for coupling power from the field emitting tip. It has large bandwidth, and acceptable loss. Another important consideration is that it is the easiest to manufacture of the four possibilities studied, an important quality for any prototype.
Resumo:
The purpose of this study was to determine which of the two methods is more appropriate to teach pitch discrimination to Grade 6 choral students to improve sight-singing note accuracy. This study consisted of three phases: pre-testing, instruction and post-testing. During the four week study, the experimental group received training using the Kodaly method while the control group received training using the traditional method. The pre and post tests were evaluated by three trained musicians. The analysis of the data utilized an independent t-test and a paired t-test with the methods of teaching (experimental and control) as a factor. Quantitative results suggest that the experimental subjects, those receiving Kodaly instruction at post-treatment showed a significant improvement in the pitch accuracy than the control group. The specific change resulted in the Kodaly method to be more effective in producing accurate pitch in sight-singing.
Resumo:
In the presented thesis work, meshfree method with distance fields is applied to create a novel computational approach which enables inclusion of the realistic geometric models of the microstructure and liberates Finite Element Analysis(FEA) from thedependance on and limitations of meshing of fine microstructural feature such as splats and porosity.Manufacturing processes of ceramics produce materials with complex porosity microstructure.Geometry of pores, their size and location substantially affect macro scale physical properties of the material. Complex structure and geometry of the pores severely limit application of modern Finite Element Analysis methods because they require construction of spatial grids (meshes) that conform to the geometric shape of the structure. As a result, there are virtually no effective tools available for predicting overall mechanical and thermal properties of porous materials based on their microstructure. This thesis is a separate handling and controls of geometric and physical computational models that are seamlessly combined at solution run time. Using the proposedapproach we will determine the effective thermal conductivity tensor of real porous ceramic materials featuring both isotropic and anisotropic thermal properties. This work involved development and implementation of numerical algorithms, data structure, and software.