New fuel cells system for portable application with low temperature cofired ceramic (LTCC) technology

Miniature direct methanol fuel cells (DMFCs) are promising micro power sources for portable appliction. Low temperature cofired ceramic (LTCC), a competitive technology for current MEMS based fabrication, provides cost-effective mass manufacturing route for miniature DMFCs. Porous silver tape is adapted as electrodes to replace the traditional porous carbon electrodes due to its compatibility to LTCC processing and other electrochemical advantages. Electrochemical evaluation of silver under DMFCs operating conditions demonstrated that silver is a good electrode for DMFCs because of its reasonable corrosion resistance, low passivating current, and enhanced catalytic effect. Two catalyst loading methods (cofiring and postfiring) of the platinum and ruthenium catalysts are evaluated for LTCC based processing. The electrochemical analysis exhibits that the cofired path out-performs the postfiring path both at the anode and cathode. The reason is the formation of high surface area precipitated whiskers. Self-constraint sintering is utilized to overcome the difficulties of the large difference of coefficient of thermal expansion (CTE) between silver and LTCC (Dupont 951) tape during cofiring. The graphite sheet employed as a cavity fugitive insert guarantees cavity dimension conservation. Finally, performance of the membrane electrode assembly (MEA) with the porous silver electrode in the regular graphite electrode based cell and the integrated cofired cell is measured under passive fuel feeding condition. The MEA of the regular cell performs better as the electrode porosity and temperature increased. The power density of 10 mWcm-2 was obtained at ambient conditions with 1M methanol and it increased to 16 mWcm -2 at 50°C from an open circuit voltage of 0.58V. For the integrated prototype cell, the best performance, which depends on the balance methanol crossover and mass transfer at different temperatures and methanol concentrations, reaches 1.13 mWcm-2 at 2M methanol solution at ambient pressure. The porous media pore structure increases the methanol crossover resistance. As temperature increased to 60°C, the device increases to 2.14 mWcm-2.

The relationship of fear of intimacy, body image avoidance and body mass index

Issues of body image and ability to achieve intimacy are connected to body weight, yet remain largely unexplored and have not been evaluated by gender. The underlying purpose of this research was to determine if avoidant attitudes and perceptions of one's body may hold implications toward its use in intimate interactions, and if an above average body weight would tend to increase this avoidance. The National Health and Nutrition Examination Survey (NHANES, 1999-2002) finds that 64.5% of US adults are overweight, with 61.9% of women and 67.2% of men. The increasing prevalence of overweight and obesity in men and women shows no reverse trend, nor have prevention and treatment proven effective in the long term. The researcher gathered self-reported age, gender, height and weight data from 55 male and 58 female subjects (determined by a prospective power analysis with a desired medium effect size (r=.30) to determine body mass index (BMI), determining a mean age of 21.6 years and mean BMI of 25.6. Survey instruments consisted of two scales that are germane to the variables being examined. They were (1) Descutner and Thelen of the University of Missouri‘s (1991) Fear-of-Intimacy scale; and (2) Rosen, Srebnik, Saltzberg, and Wendt's (1991) Body Image Avoidance Questionnaire. Results indicated that as body mass index increases, fear of intimacy increases (p<0.05) and that as body mass index increases, body image avoidance increases (p<0.05). The relationship that as body image avoidance increases, fear of intimacy increases was not supported, but approached significance at (p<0.07). No differences in these relationships were determined between gender groups. For age, the only observed relationship was that of a difference between scores for age groups [18 to 22 (group 1) and ages 23 to 34 (group 2)] for the relationship of body image avoidance and fear of intimacy (p<0.02). The results suggest that the relationship of body image avoidance and fear of intimacy, as well as age, bear consideration toward the escalating prevalence of overweight and obesity. An integrative approach to body weight that addresses issues of body image and intimacy may prove effective in prevention and treatment.

Branch and price solution approach for order acceptance and capacity planning in make -to -order operations

The increasing emphasis on mass customization, shortened product lifecycles, synchronized supply chains, when coupled with advances in information system, is driving most firms towards make-to-order (MTO) operations. Increasing global competition, lower profit margins, and higher customer expectations force the MTO firms to plan its capacity by managing the effective demand. The goal of this research was to maximize the operational profits of a make-to-order operation by selectively accepting incoming customer orders and simultaneously allocating capacity for them at the sales stage. ^ For integrating the two decisions, a Mixed-Integer Linear Program (MILP) was formulated which can aid an operations manager in an MTO environment to select a set of potential customer orders such that all the selected orders are fulfilled by their deadline. The proposed model combines order acceptance/rejection decision with detailed scheduling. Experiments with the formulation indicate that for larger problem sizes, the computational time required to determine an optimal solution is prohibitive. This formulation inherits a block diagonal structure, and can be decomposed into one or more sub-problems (i.e. one sub-problem for each customer order) and a master problem by applying Dantzig-Wolfe’s decomposition principles. To efficiently solve the original MILP, an exact Branch-and-Price algorithm was successfully developed. Various approximation algorithms were developed to further improve the runtime. Experiments conducted unequivocally show the efficiency of these algorithms compared to a commercial optimization solver.^ The existing literature addresses the static order acceptance problem for a single machine environment having regular capacity with an objective to maximize profits and a penalty for tardiness. This dissertation has solved the order acceptance and capacity planning problem for a job shop environment with multiple resources. Both regular and overtime resources is considered. ^ The Branch-and-Price algorithms developed in this dissertation are faster and can be incorporated in a decision support system which can be used on a daily basis to help make intelligent decisions in a MTO operation.^

Branch and Price Solution Approach for Order Acceptance and Capacity Planning in Make-to-Order Operations

The increasing emphasis on mass customization, shortened product lifecycles, synchronized supply chains, when coupled with advances in information system, is driving most firms towards make-to-order (MTO) operations. Increasing global competition, lower profit margins, and higher customer expectations force the MTO firms to plan its capacity by managing the effective demand. The goal of this research was to maximize the operational profits of a make-to-order operation by selectively accepting incoming customer orders and simultaneously allocating capacity for them at the sales stage. For integrating the two decisions, a Mixed-Integer Linear Program (MILP) was formulated which can aid an operations manager in an MTO environment to select a set of potential customer orders such that all the selected orders are fulfilled by their deadline. The proposed model combines order acceptance/rejection decision with detailed scheduling. Experiments with the formulation indicate that for larger problem sizes, the computational time required to determine an optimal solution is prohibitive. This formulation inherits a block diagonal structure, and can be decomposed into one or more sub-problems (i.e. one sub-problem for each customer order) and a master problem by applying Dantzig-Wolfe’s decomposition principles. To efficiently solve the original MILP, an exact Branch-and-Price algorithm was successfully developed. Various approximation algorithms were developed to further improve the runtime. Experiments conducted unequivocally show the efficiency of these algorithms compared to a commercial optimization solver. The existing literature addresses the static order acceptance problem for a single machine environment having regular capacity with an objective to maximize profits and a penalty for tardiness. This dissertation has solved the order acceptance and capacity planning problem for a job shop environment with multiple resources. Both regular and overtime resources is considered. The Branch-and-Price algorithms developed in this dissertation are faster and can be incorporated in a decision support system which can be used on a daily basis to help make intelligent decisions in a MTO operation.

The Relationship of Fear of Intimacy, Body Image Avoidance and Body Mass Index

Issues of body image and ability to achieve intimacy are connected to body weight, yet remain largely unexplored and have not been evaluated by gender. The underlying purpose of this research was to determine if avoidant attitudes and perceptions of one’s body may hold implications toward its use in intimate interactions, and if an above average body weight would tend to increase this avoidance. The National Health and Nutrition Examination Survey (NHANES, 1999-2002) finds that 64.5% of US adults are overweight, with 61.9% of women and 67.2% of men. The increasing prevalence of overweight and obesity in men and women shows no reverse trend, nor have prevention and treatment proven effective in the long term. The researcher gathered self-reported age, gender, height and weight data from 55 male and 58 female subjects (determined by a prospective power analysis with a desired medium effect size (r =.30) to determine body mass index (BMI), determining a mean age of 21.6 years and mean BMI of 25.6. Survey instruments consisted of two scales that are germane to the variables being examined. They were (1) Descutner and Thelen of the University of Missouri’s (1991) Fear-of-Intimacy scale and (2) Rosen, Srebnik, Saltzberg, and Wendt’s (1991) Body Image Avoidance Questionnaire. Results indicated that as body mass index increases, fear of intimacy increases (p<0.05) and that as body mass index increases, body image avoidance increases (p<0.05). The relationship that as body image avoidance increases, fear of intimacy increases was not supported, but approached significance at (p<0.07). No differences in these relationships were determined between gender groups. For age, the only observed relationship was that of a difference between scores for age groups [18 to 22 (group 1) and ages 23 to 34 (group 2)] for the relationship of body image avoidance and fear of intimacy (p<0.02). The results suggest that the relationship of body image avoidance and fear of intimacy, as well as age, bear consideration toward the escalating prevalence of overweight and obesity. An integrative approach to body weight that addresses issues of body image and intimacy may prove effective in prevention and treatment.