A planning model for needs analysis for subacute care

The purpose of this study is to produce a model to be used by state regulating agencies to assess demand for subacute care. In accomplishing this goal, the study refines the definition of subacute care, demonstrates a method for bed need assessment, and measures the effectiveness of this new level of care. This was the largest study of subacute care to date. Research focused on 19 subacute units in 16 states, each of which provides high-intensity rehabilitative and/or restorative care carried out in a high-tech unit. Each of the facilities was based in a nursing home, but utilized separate staff, equipment, and services. Because these facilities are under local control, it was possible to study regional differences in subacute care demand.^ Using this data, a model for predicting demand for subacute care services was created, building on earlier models submitted by John Whitman for the American Hospital Association and Robin E. MacStravic. The Broderick model uses the "bootstrapping" method and takes advantage of high technology: computers and software, databases in business and government, publicly available databases from providers or commercial vendors, professional organizations, and other information sources. Using newly available sources of information, this new model addresses the problems and needs of health care planners as they approach the challenges of the 21st century. ^

In vivo characterization of myocardial tissue post myocardial infarction using combined fluorescence and diffuse reflectance spectroscopy

Accurately assessing the extent of myocardial tissue injury induced by Myocardial infarction (MI) is critical to the planning and optimization of MI patient management. With this in mind, this study investigated the feasibility of using combined fluorescence and diffuse reflectance spectroscopy to characterize a myocardial infarct at the different stages of its development. An animal study was conducted using twenty male Sprague-Dawley rats with MI. In vivo fluorescence spectra at 337 nm excitation and diffuse reflectance between 400 nm and 900 nm were measured from the heart using a portable fiber-optic spectroscopic system. Spectral acquisition was performed on (1) the normal heart region; (2) the region immediately surrounding the infarct; and (3) the infarcted region—one, two, three and four weeks into MI development. The spectral data were divided into six subgroups according to the histopathological features associated with various degrees/severities of myocardial tissue injury as well as various stages of myocardial tissue remodeling, post infarction. Various data processing and analysis techniques were employed to recognize the representative spectral features corresponding to various histopathological features associated with myocardial infarction. The identified spectral features were utilized in discriminant analysis to further evaluate their effectiveness in classifying tissue injuries induced by MI. In this study, it was observed that MI induced significant alterations (p < 0.05) in the diffuse reflectance spectra, especially between 450 nm and 600 nm, from myocardial tissue within the infarcted and surrounding regions. In addition, MI induced a significant elevation in fluorescence intensities at 400 and 460 nm from the myocardial tissue from the same regions. The extent of these spectral alterations was related to the duration of the infarction. Using the spectral features identified, an effective tissue injury classification algorithm was developed which produced a satisfactory overall classification result (87.8%). The findings of this research support the concept that optical spectroscopy represents a useful tool to non-invasively determine the in vivo pathophysiological features of a myocardial infarct and its surrounding tissue, thereby providing valuable real-time feedback to surgeons during various surgical interventions for MI.

In Vivo Characterization of Myocardial Tissue Post Myocardial Infarction Using Combined Fluorescence and Diffuse Reflectance Spectroscopy

Accurately assessing the extent of myocardial tissue injury induced by Myocardial infarction (MI) is critical to the planning and optimization of MI patient management. With this in mind, this study investigated the feasibility of using combined fluorescence and diffuse reflectance spectroscopy to characterize a myocardial infarct at the different stages of its development. An animal study was conducted using twenty male Sprague-Dawley rats with MI. In vivo fluorescence spectra at 337 nm excitation and diffuse reflectance between 400 nm and 900 nm were measured from the heart using a portable fiber-optic spectroscopic system. Spectral acquisition was performed on - (1) the normal heart region; (2) the region immediately surrounding the infarct; and (3) the infarcted region - one, two, three and four weeks into MI development. The spectral data were divided into six subgroups according to the histopathological features associated with various degrees / severities of myocardial tissue injury as well as various stages of myocardial tissue remodeling, post infarction. Various data processing and analysis techniques were employed to recognize the representative spectral features corresponding to various histopathological features associated with myocardial infarction. The identified spectral features were utilized in discriminant analysis to further evaluate their effectiveness in classifying tissue injuries induced by MI. In this study, it was observed that MI induced significant alterations (p < 0.05) in the diffuse reflectance spectra, especially between 450 nm and 600 nm, from myocardial tissue within the infarcted and surrounding regions. In addition, MI induced a significant elevation in fluorescence intensities at 400 and 460 nm from the myocardial tissue from the same regions. The extent of these spectral alterations was related to the duration of the infarction. Using the spectral features identified, an effective tissue injury classification algorithm was developed which produced a satisfactory overall classification result (87.8%). The findings of this research support the concept that optical spectroscopy represents a useful tool to non-invasively determine the in vivo pathophysiological features of a myocardial infarct and its surrounding tissue, thereby providing valuable real-time feedback to surgeons during various surgical interventions for MI.

Analysis of the lateral diffuse metal-oxide semiconductor (LDMOS) power amplifier for cellular base stations

The primary purpose of this thesis was to present a theoretical large-signal analysis to study the power gain and efficiency of a microwave power amplifier for LS-band communications using software simulation. Power gain, efficiency, reliability, and stability are important characteristics in the power amplifier design process. These characteristics affect advance wireless systems, which require low-cost device amplification without sacrificing system performance. Large-signal modeling and input and output matching components are used for this thesis. Motorola's Electro Thermal LDMOS model is a new transistor model that includes self-heating affects and is capable of small-large signal simulations. It allows for most of the design considerations to be on stability, power gain, bandwidth, and DC requirements. The matching technique allows for the gain to be maximized at a specific target frequency. Calculations and simulations for the microwave power amplifier design were performed using Matlab and Microwave Office respectively. Microwave Office is the simulation software used in this thesis. The study demonstrated that Motorola's Electro Thermal LDMOS transistor in microwave power amplifier design process is a viable solution for common-source amplifier applications in high power base stations. The MET-LDMOS met the stability requirements for the specified frequency range without a stability-improvement model. The power gain of the amplifier circuit was improved through proper microwave matching design using input/output-matching techniques. The gain and efficiency of the amplifier improve approximately 4dB and 7.27% respectively. The gain value is roughly .89 dB higher than the maximum gain specified by the MRF21010 data sheet specifications. This work can lead to efficient modeling and development of high power LDMOS transistor implementations in commercial and industry applications.

A planning model for needs analysis for subacute care

The purpose of this study is to produce a model to be used by state regulating agencies to assess demand for subacute care. In accomplishing this goal, the study refines the definition of subacute care, demonstrates a method for bed need assessment, and measures the effectiveness of this new level of care. This was the largest study of subacute care to date. Research focused on 19 subacute units in 16 states, each of which provides high-intensity rehabilitative and/or restorative care carried out in a high-tech unit. Each of the facilities was based in a nursing home, but utilized separate staff, equipment, and services. Because these facilities are under local control, it was possible to study regional differences in subacute care demand. Using this data, a model for predicting demand for subacute care services was created, building on earlier models submitted by John Whitman for the American Hospital Association and Robin E. MacStravic. The Broderick model uses the "bootstrapping" method and takes advantage of high technology: computers and software, databases in business and government, publicly available databases from providers or commercial vendors, professional organizations, and other information sources. Using newly available sources of information, this new model addresses the problems and needs of health care planners as they approach the challenges of the 21st century.