Universal Design for Learning and Differentiated Instruction: Resolving Competing Mandates of the Individuals with Disabilities Education Act and No Child Left Behind

Recent federal mandates require accountability for providing students with disabilities access to the general education curriculum. In this paper, the authors recommend that principles of Universal Design for Learning and Differentiated Instruction can help school personnel tailor their teaching to meet the various strengths and needs of individual students.

Analytical approximations to predict performance measures of manufacturing systems with job failures and parallel processing

Parallel processing is prevalent in many manufacturing and service systems. Many manufactured products are built and assembled from several components fabricated in parallel lines. An example of this manufacturing system configuration is observed at a manufacturing facility equipped to assemble and test web servers. Characteristics of a typical web server assembly line are: multiple products, job circulation, and paralleling processing. The primary objective of this research was to develop analytical approximations to predict performance measures of manufacturing systems with job failures and parallel processing. The analytical formulations extend previous queueing models used in assembly manufacturing systems in that they can handle serial and different configurations of paralleling processing with multiple product classes, and job circulation due to random part failures. In addition, appropriate correction terms via regression analysis were added to the approximations in order to minimize the gap in the error between the analytical approximation and the simulation models. Markovian and general type manufacturing systems, with multiple product classes, job circulation due to failures, and fork and join systems to model parallel processing were studied. In the Markovian and general case, the approximations without correction terms performed quite well for one and two product problem instances. However, it was observed that the flow time error increased as the number of products and net traffic intensity increased. Therefore, correction terms for single and fork-join stations were developed via regression analysis to deal with more than two products. The numerical comparisons showed that the approximations perform remarkably well when the corrections factors were used in the approximations. In general, the average flow time error was reduced from 38.19% to 5.59% in the Markovian case, and from 26.39% to 7.23% in the general case. All the equations stated in the analytical formulations were implemented as a set of Matlab scripts. By using this set, operations managers of web server assembly lines, manufacturing or other service systems with similar characteristics can estimate different system performance measures, and make judicious decisions - especially setting delivery due dates, capacity planning, and bottleneck mitigation, among others.

Time, Cost, and Environmental Impact Analysis for Sustainable Design at Multiple Building Levels

Construction projects are complex endeavors that require the involvement of different professional disciplines in order to meet various project objectives that are often conflicting. The level of complexity and the multi-objective nature of construction projects lend themselves to collaborative design and construction such as integrated project delivery (IPD), in which relevant disciplines work together during project conception, design and construction. Traditionally, the main objectives of construction projects have been to build in the least amount of time with the lowest cost possible, thus the inherent and well-established relationship between cost and time has been the focus of many studies. The importance of being able to effectively model relationships among multiple objectives in building construction has been emphasized in a wide range of research. In general, the trade-off relationship between time and cost is well understood and there is ample research on the subject. However, despite sustainable building designs, relationships between time and environmental impact, as well as cost and environmental impact, have not been fully investigated. The objectives of this research were mainly to analyze and identify relationships of time, cost, and environmental impact, in terms of CO2 emissions, at different levels of a building: material level, component level, and building level, at the pre-use phase, including manufacturing and construction, and the relationships of life cycle cost and life cycle CO2 emissions at the usage phase. Additionally, this research aimed to develop a robust simulation-based multi-objective decision-support tool, called SimulEICon, which took construction data uncertainty into account, and was capable of incorporating life cycle assessment information to the decision-making process. The findings of this research supported the trade-off relationship between time and cost at different building levels. Moreover, the time and CO2 emissions relationship presented trade-off behavior at the pre-use phase. The results of the relationship between cost and CO2 emissions were interestingly proportional at the pre-use phase. The same pattern continually presented after the construction to the usage phase. Understanding the relationships between those objectives is a key in successfully planning and designing environmentally sustainable construction projects.

Analytical Approximations to Predict Performance Measures of Manufacturing Systems with Job Failures and Parallel Processing

Parallel processing is prevalent in many manufacturing and service systems. Many manufactured products are built and assembled from several components fabricated in parallel lines. An example of this manufacturing system configuration is observed at a manufacturing facility equipped to assemble and test web servers. Characteristics of a typical web server assembly line are: multiple products, job circulation, and paralleling processing. The primary objective of this research was to develop analytical approximations to predict performance measures of manufacturing systems with job failures and parallel processing. The analytical formulations extend previous queueing models used in assembly manufacturing systems in that they can handle serial and different configurations of paralleling processing with multiple product classes, and job circulation due to random part failures. In addition, appropriate correction terms via regression analysis were added to the approximations in order to minimize the gap in the error between the analytical approximation and the simulation models. Markovian and general type manufacturing systems, with multiple product classes, job circulation due to failures, and fork and join systems to model parallel processing were studied. In the Markovian and general case, the approximations without correction terms performed quite well for one and two product problem instances. However, it was observed that the flow time error increased as the number of products and net traffic intensity increased. Therefore, correction terms for single and fork-join stations were developed via regression analysis to deal with more than two products. The numerical comparisons showed that the approximations perform remarkably well when the corrections factors were used in the approximations. In general, the average flow time error was reduced from 38.19% to 5.59% in the Markovian case, and from 26.39% to 7.23% in the general case. All the equations stated in the analytical formulations were implemented as a set of Matlab scripts. By using this set, operations managers of web server assembly lines, manufacturing or other service systems with similar characteristics can estimate different system performance measures, and make judicious decisions - especially setting delivery due dates, capacity planning, and bottleneck mitigation, among others.

Focused ion beam manufacturing of magnetic nanostructures

A number of patterning methods including conventional photo-lithography and E-beam lithography have been employed to pattern devices with critical dimensions of submicrometer levels. The methods of device fabrication by lithography and multilevel processing are usually specific to the chemical and physical properties of the etchants and materials used, and require a number of processing steps. As an alternative, focused ion beam (FIB) lithography is a unique and straightforward tool to rapidly develop nanomagnetic prototyping devices. This feature of FIB is critical to conduct the basic study necessary to advance the state-of-the-art in magnetic recording. ^ The dissertation develops a specific design of nanodevices and demonstrates FIB-fabricated stable and reproducible magnetic nanostructures with a critical dimension of about 10 nm. The project included the fabrication of a patterned single and multilayer magnetic media with areal densities beyond 10 Terabit/in 2. Each block had perpendicular or longitudinal magnetic anisotropy and a single domain structure. The purpose was to demonstrate how the ability of FIB to directly etch nanoscale patterns allowed exploring (even in the academic environment) the true physics of various types of nanostructures. ^ Another goal of this study was the investigation of FIB patterned magnetic media with a set of characterization tools: e.g. Spinstand Guzik V2002, magnetic force microscopy, scanning electron microscopy with energy dispersive system and wavelength dispersive system. ^ In the course of this work, a unique prototype of a record high density patterned magnetic media device capable of 10 terabit/in 2 was built. The read/write testing was performed by a Guzik spinstand. The readback signals were recorded and analyzed by a digital oscilloscope. A number of different configurations for writing and reading information from a magnetic medium were explored. The prototype transducers for this work were fabricated via FIB trimming of different magnetic recording heads. ^

Strategic positioning of Taiwan in the outsourcing market: Evidence from information technology services and electronic manufacturing outsourcing to China

In outsourcing relationships with China, the Electronic Manufacturing (EM) and Information Technology Services (ITS) industry in Taiwan may possess such advantages as the continuing growth of its production value, complete manufacturing supply chain, low production cost and a large-scale Chinese market, and language and culture similarity compared to outsourcing to other countries. Nevertheless, the Council for Economic Planning and Development of Executive Yuan (CEPD) found that Taiwan's IT services outsourcing to China is subject to certain constraints and might not be as successful as the EM outsourcing (Aggarwal, 2003; CEPD, 2004a; CIER, 2003; Einhorn and Kriplani, 2003; Kumar and Zhu, 2006; Li and Gao, 2003; MIC, 2006). Some studies examined this issue, but failed to (1) provide statistical evidence about lower prevalence rates of IT services outsourcing, and (2) clearly explain the lower prevalence rates of IT services outsourcing by identifying similarities and differences between both types of outsourcing contexts. This research seeks to fill that gap and possibly provide potential strategic guidelines to ITS firms in Taiwan. This study adopts Transaction Cost Economics (TCE) as the theoretical basis. The basic premise is that different types of outsourcing activities may incur differing transaction costs and realize varying degrees of outsourcing success due to differential attributes of the transactions in the outsourcing process. Using primary data gathered from questionnaire surveys of ninety two firms, the results from exploratory analysis and binary logistic regression indicated that (1) when outsourcing to China, Taiwanese firms' ITS outsourcing tends to have higher level of asset specificity, uncertainty and technical skills relative to EM outsourcing, and these features indirectly reduce firms' outsourcing prevalence rates via their direct positive impacts on transaction costs; (2) Taiwanese firms' ITS outsourcing tends to have lower level of transaction structurability relative to EM outsourcing, and this feature indirectly increases firms' outsourcing prevalence rates via its direct negative impacts on transaction costs; (3) frequency does influence firms' transaction costs in ITS outsourcing positively, but does not bring impacts into their outsourcing prevalence rates, (4) relatedness does influence firms' transaction costs positively and prevalence rates negatively in ITS outsourcing, but its impacts on the prevalence rates are not caused by the mediation effects of transaction costs, and (5) firm size of outsourcing provider does not affect firms' transaction costs, but does affect their outsourcing prevalence rates in ITS outsourcing directly and positively. Using primary data gathered from face-to-face interviews of executives from seven firms, the results from inductive analysis indicated that (1) IT services outsourcing has lower prevalence rates than EM outsourcing, and (2) this result is mainly attributed to Taiwan's core competence in manufacturing and management and higher overall transaction costs of IT services outsourcing. Specifically, there is not much difference between both types of outsourcing context in the transaction characteristics of reputation and most aspects of overall comparison. Although there are some differences in the feature of firm size of the outsourcing provider, the difference doesn't cause apparent impacts on firms' overall transaction costs. The medium or above medium difference in the transaction characteristics of asset specificity, uncertainty, frequency, technical skills, transaction structurability, and relatedness has caused higher overall transaction costs for IT services outsourcing. This higher cost might cause lower prevalence rates for ITS outsourcing relative to EM outsourcing. Overall, the interview results are consistent with the statistical analyses and provide support to my expectation that in outsourcing to China, Taiwan's electronic manufacturing firms do have lower prevalence rates of IT services outsourcing relative to EM outsourcing due to higher transaction costs caused by certain attributes. To solve this problem, firms' management should aim at identifying alternative strategies and strive to reduce their overall transaction costs of IT services outsourcing by initiating appropriate strategies which fit their environment and needs.