Physical dynamic simulation of shipboard power system components in a distributed computational environment

Shipboard power systems have different characteristics than the utility power systems. In the Shipboard power system it is crucial that the systems and equipment work at their peak performance levels. One of the most demanding aspects for simulations of the Shipboard Power Systems is to connect the device under test to a real-time simulated dynamic equivalent and in an environment with actual hardware in the Loop (HIL). The real time simulations can be achieved by using multi-distributed modeling concept, in which the global system model is distributed over several processors through a communication link. The advantage of this approach is that it permits the gradual change from pure simulation to actual application. In order to perform system studies in such an environment physical phase variable models of different components of the shipboard power system were developed using operational parameters obtained from finite element (FE) analysis. These models were developed for two types of studies low and high frequency studies. Low frequency studies are used to examine the shipboard power systems behavior under load switching, and faults. High-frequency studies were used to predict abnormal conditions due to overvoltage, and components harmonic behavior. Different experiments were conducted to validate the developed models. The Simulation and experiment results show excellent agreement. The shipboard power systems components behavior under internal faults was investigated using FE analysis. This developed technique is very curial in the Shipboard power systems faults detection due to the lack of comprehensive fault test databases. A wavelet based methodology for feature extraction of the shipboard power systems current signals was developed for harmonic and fault diagnosis studies. This modeling methodology can be utilized to evaluate and predicate the NPS components future behavior in the design stage which will reduce the development cycles, cut overall cost, prevent failures, and test each subsystem exhaustively before integrating it into the system.

A hermeneutic phenomenology of graduate education students' understandings of instructor power in a higher education classroom

Higher education is a distribution center of knowledge and economic, social, and cultural power (Cervero & Wilson, 2001). A critical approach to understanding a higher education classroom begins with recognizing the instructor's position of power and authority (Tisdell, Hanley, & Taylor, 2000). The power instructors wield exists mostly unquestioned, allowing for teaching practices that reproduce the existing societal patterns of inequity in the classroom (Brookfield, 2000). ^ The purpose of this hermeneutic phenomenological study was to explore students' experiences with the power of their instructors in a higher education classroom. A hermeneutic phenomenological study intertwines the interpretations of both the participants and the researcher about a lived experience to uncover layers of meaning because the meanings of lived experiences are usually not readily apparent (van Manen, 1990). Fifteen participants were selected using criterion, convenience, and snowball sampling. The primary data gathering method were semi-structured interviews guided by an interview protocol (Creswell, 2003). Data were interpreted using thematic reflection (van Manen, 1990). ^ Three themes emerged from data interpretation: (a) structuring of instructor-student relationships, (b) connecting power to instructor personality, and (c) learning to navigate the terrains of higher education. How interpersonal relationships were structured in a higher education classroom shaped how students perceived power in that higher education classroom. Positive relationships were described using the metaphor of family and a perceived ethic of caring and nurturing by the instructor. As participants were consistently exposed to exercises of instructor power in a higher education classroom, they attributed those exercises of power to particular instructor traits rather than systemic exercises of power. As participants progressed from undergraduate to graduate studies, they perceived the benefits of expertise in content or knowledge development as secondary to expertise in successfully navigating the social, cultural, political, and interpersonal terrains of higher education. Ultimately, participants expressed that higher education is not about what you know; it is about learning how to play the game. Implications for teaching in higher education and considerations for future research conclude the study.^

Playing the Game: A Hermeneutic Phenomenology of Graduate Education Students’ Perceptions of Instructor Power in a Higher Education Classroom

The purpose of this hermeneutic phenomenological study was to explore students’ experiences with the power of their instructors in a higher education classroom. This study provides a deeper understanding of instructor power from student perspectives to inform teaching practices in the higher education classroom.

Optimization of wireless power transfer via magnetic resonance in different media

A wide range of non-destructive testing (NDT) methods for the monitoring the health of concrete structure has been studied for several years. The recent rapid evolution of wireless sensor network (WSN) technologies has resulted in the development of sensing elements that can be embedded in concrete, to monitor the health of infrastructure, collect and report valuable related data. The monitoring system can potentially decrease the high installation time and reduce maintenance cost associated with wired monitoring systems. The monitoring sensors need to operate for a long period of time, but sensors batteries have a finite life span. Hence, novel wireless powering methods must be devised. The optimization of wireless power transfer via Strongly Coupled Magnetic Resonance (SCMR) to sensors embedded in concrete is studied here. First, we analytically derive the optimal geometric parameters for transmission of power in the air. This specifically leads to the identification of the local and global optimization parameters and conditions, it was validated through electromagnetic simulations. Second, the optimum conditions were employed in the model for propagation of energy through plain and reinforced concrete at different humidity conditions, and frequencies with extended Debye's model. This analysis leads to the conclusion that SCMR can be used to efficiently power sensors in plain and reinforced concrete at different humidity levels and depth, also validated through electromagnetic simulations. The optimization of wireless power transmission via SMCR to Wearable and Implantable Medical Device (WIMD) are also explored. The optimum conditions from the analytics were used in the model for propagation of energy through different human tissues. This analysis shows that SCMR can be used to efficiently transfer power to sensors in human tissue without overheating through electromagnetic simulations, as excessive power might result in overheating of the tissue. Standard SCMR is sensitive to misalignment; both 2-loops and 3-loops SCMR with misalignment-insensitive performances are presented. The power transfer efficiencies above 50% was achieved over the complete misalignment range of 0°-90° and dramatically better than typical SCMR with efficiencies less than 10% in extreme misalignment topologies.

The effects of paternal and maternal nurturance and involvement on young adult academic outcomes

The present study examines how mothering and fathering impact child academic outcomes in divorced and intact families, and if there are unique influences of mothering and fathering variables for sons and daughters. An ethnically diverse sample of 1,714 university students from Florida International University (n=1371) and Florida State University (n=343) responded to measures on a questionnaire that included the Nurturant Fathering and Mothering Scales (Finley & Schwartz, 2004; Schwartz & Finley, 2005; Finley & Schwartz, 2006), the Mother and Father Involvement Scales (Finley, Mira, & Schwartz, 2008), demographic measures, and academic outcome measures. In intact families, mothering and fathering variables were significantly correlated with each other, and positively correlated with child academic outcomes including grades, GPA, academic satisfaction, and academic importance. In divorced families, mothering and fathering variables were not correlated with each other. Furthermore, when analyzing divorced families, significant effects were found for both parent and child gender. Mothering variables were found to have the greatest positive impact for sons' academic outcomes. Maternal nurturance and maternal involvement were correlated positively with academic outcomes for sons from divorced families and accounted for 3-4% of the unique variance explained. Consistently, desired mother involvement, how much involvement the child wished they had received, was negatively correlated with academic outcomes for sons from divorced families and accounted for 10-15% of the unique variance explained. This means that when the amount of maternal involvement that sons in divorced families received matched or exceeded their desired level of involvement, sons had more positive academic outcomes including grades, GPA, satisfaction with academics and academic importance. This suggests that in intact family forms, nurturant and involved mothering and fathering have a positive effect on academic outcomes for sons and daughters. In divorced family forms, the effects of fathering on child academic outcomes were not significant. Therefore, in divorced families, the positive effects fathering on academic outcomes of sons and daughters drop out, and mothers are uniquely important for sons' academic success.^

Physical dynamic simulation of shipboard power system components in a distributed computational environment

Shipboard power systems have different characteristics than the utility power systems. In the Shipboard power system it is crucial that the systems and equipment work at their peak performance levels. One of the most demanding aspects for simulations of the Shipboard Power Systems is to connect the device under test to a real-time simulated dynamic equivalent and in an environment with actual hardware in the Loop (HIL). The real time simulations can be achieved by using multi-distributed modeling concept, in which the global system model is distributed over several processors through a communication link. The advantage of this approach is that it permits the gradual change from pure simulation to actual application. In order to perform system studies in such an environment physical phase variable models of different components of the shipboard power system were developed using operational parameters obtained from finite element (FE) analysis. These models were developed for two types of studies low and high frequency studies. Low frequency studies are used to examine the shipboard power systems behavior under load switching, and faults. High-frequency studies were used to predict abnormal conditions due to overvoltage, and components harmonic behavior. Different experiments were conducted to validate the developed models. The Simulation and experiment results show excellent agreement. The shipboard power systems components behavior under internal faults was investigated using FE analysis. This developed technique is very curial in the Shipboard power systems faults detection due to the lack of comprehensive fault test databases. A wavelet based methodology for feature extraction of the shipboard power systems current signals was developed for harmonic and fault diagnosis studies. This modeling methodology can be utilized to evaluate and predicate the NPS components future behavior in the design stage which will reduce the development cycles, cut overall cost, prevent failures, and test each subsystem exhaustively before integrating it into the system.

The Effects of Paternal and Maternal Nurturance and Involvement on Young Adult Academic Outcomes

The present study examines how mothering and fathering impact child academic outcomes in divorced and intact families, and if there are unique influences of mothering and fathering variables for sons and daughters. An ethnically diverse sample of 1,714 university students from Florida International University (n=1371) and Florida State University (n=343) responded to measures on a questionnaire that included the Nurturant Fathering and Mothering Scales (Finley & Schwartz, 2004; Schwartz & Finley, 2005; Finley & Schwartz, 2006), the Mother and Father Involvement Scales (Finley, Mira, & Schwartz, 2008), demographic measures, and academic outcome measures. In intact families, mothering and fathering variables were significantly correlated with each other, and positively correlated with child academic outcomes including grades, GPA, academic satisfaction, and academic importance. In divorced families, mothering and fathering variables were not correlated with each other. Furthermore, when analyzing divorced families, significant effects were found for both parent and child gender. Mothering variables were found to have the greatest positive impact for sons’ academic outcomes. Maternal nurturance and maternal involvement were correlated positively with academic outcomes for sons from divorced families and accounted for 3-4% of the unique variance explained. Consistently, desired mother involvement, how much involvement the child wished they had received, was negatively correlated with academic outcomes for sons from divorced families and accounted for 10-15% of the unique variance explained. This means that when the amount of maternal involvement that sons in divorced families received matched or exceeded their desired level of involvement, sons had more positive academic outcomes including grades, GPA, satisfaction with academics and academic importance. This suggests that in intact family forms, nurturant and involved mothering and fathering have a positive effect on academic outcomes for sons and daughters. In divorced family forms, the effects of fathering on child academic outcomes were not significant. Therefore, in divorced families, the positive effects fathering on academic outcomes of sons and daughters drop out, and mothers are uniquely important for sons’ academic success.

Optimization of Wireless Power Transfer via Magnetic Resonance in Different Media

A wide range of non-destructive testing (NDT) methods for the monitoring the health of concrete structure has been studied for several years. The recent rapid evolution of wireless sensor network (WSN) technologies has resulted in the development of sensing elements that can be embedded in concrete, to monitor the health of infrastructure, collect and report valuable related data. The monitoring system can potentially decrease the high installation time and reduce maintenance cost associated with wired monitoring systems. The monitoring sensors need to operate for a long period of time, but sensors batteries have a finite life span. Hence, novel wireless powering methods must be devised. The optimization of wireless power transfer via Strongly Coupled Magnetic Resonance (SCMR) to sensors embedded in concrete is studied here. First, we analytically derive the optimal geometric parameters for transmission of power in the air. This specifically leads to the identification of the local and global optimization parameters and conditions, it was validated through electromagnetic simulations. Second, the optimum conditions were employed in the model for propagation of energy through plain and reinforced concrete at different humidity conditions, and frequencies with extended Debye's model. This analysis leads to the conclusion that SCMR can be used to efficiently power sensors in plain and reinforced concrete at different humidity levels and depth, also validated through electromagnetic simulations. The optimization of wireless power transmission via SMCR to Wearable and Implantable Medical Device (WIMD) are also explored. The optimum conditions from the analytics were used in the model for propagation of energy through different human tissues. This analysis shows that SCMR can be used to efficiently transfer power to sensors in human tissue without overheating through electromagnetic simulations, as excessive power might result in overheating of the tissue. Standard SCMR is sensitive to misalignment; both 2-loops and 3-loops SCMR with misalignment-insensitive performances are presented. The power transfer efficiencies above 50% was achieved over the complete misalignment range of 0°-90° and dramatically better than typical SCMR with efficiencies less than 10% in extreme misalignment topologies.

Soft power as the new norm: How the Chinese-Russian strategic partnership (soft) balances American hegemony in an era of unipolarity

This study explores how great powers not allied with the United States formulate their grand strategies in a unipolar international system. Specifically, it analyzes the strategies China and Russia have developed to deal with U.S. hegemony by examining how Moscow and Beijing have responded to American intervention in Central Asia. The study argues that China and Russia have adopted a soft balancing strategy of to indirectly balance the United States at the regional level. This strategy uses normative capabilities such as soft power, alternative institutions and regionalization to offset the overwhelming material hardware of the hegemon. The theoretical and methodological approach of this dissertation is neoclassical realism. Chinese and Russian balancing efforts against the United States are based on their domestic dynamics as well as systemic constraints. Neoclassical realism provides a bridge between the internal characteristics of states and the environment which those states are situated. Because China and Russia do not have the hardware (military or economic power) to directly challenge the United States, they must resort to their software (soft power and norms) to indirectly counter American preferences and set the agenda to obtain their own interests. Neoclassical realism maintains that soft power is an extension of hard power and a reflection of the internal makeup of states. The dissertation uses the heuristic case study method to demonstrate the efficacy of soft balancing. Such case studies help to facilitate theory construction and are not necessarily the demonstrable final say on how states behave under given contexts. Nevertheless, it finds that China and Russia have increased their soft power to counterbalance the United States in certain regions of the world, Central Asia in particular. The conclusion explains how soft balancing can be integrated into the overall balance-of-power framework to explain Chinese and Russian responses to U.S. hegemony. It also suggests that an analysis of norms and soft power should be integrated into the study of grand strategy, including both foreign policy and military doctrine.

Efficiency and power density improvement of grid-connected hybrid renewable energy systems utilizing high frequency-based power converters

High efficiency of power converters placed between renewable energy sources and the utility grid is required to maximize the utilization of these sources. Power quality is another aspect that requires large passive elements (inductors, capacitors) to be placed between these sources and the grid. The main objective is to develop higher-level high frequency-based power converter system (HFPCS) that optimizes the use of hybrid renewable power injected into the power grid. The HFPCS provides high efficiency, reduced size of passive components, higher levels of power density realization, lower harmonic distortion, higher reliability, and lower cost. The dynamic modeling for each part in this system is developed, simulated and tested. The steady-state performance of the grid-connected hybrid power system with battery storage is analyzed. Various types of simulations were performed and a number of algorithms were developed and tested to verify the effectiveness of the power conversion topologies. A modified hysteresis-control strategy for the rectifier and the battery charging/discharging system was developed and implemented. A voltage oriented control (VOC) scheme was developed to control the energy injected into the grid. The developed HFPCS was compared experimentally with other currently available power converters. The developed HFPCS was employed inside a microgrid system infrastructure, connecting it to the power grid to verify its power transfer capabilities and grid connectivity. Grid connectivity tests verified these power transfer capabilities of the developed converter in addition to its ability of serving the load in a shared manner. In order to investigate the performance of the developed system, an experimental setup for the HF-based hybrid generation system was constructed. We designed a board containing a digital signal processor chip on which the developed control system was embedded. The board was fabricated and experimentally tested. The system's high precision requirements were verified. Each component of the system was built and tested separately, and then the whole system was connected and tested. The simulation and experimental results confirm the effectiveness of the developed converter system for grid-connected hybrid renewable energy systems as well as for hybrid electric vehicles and other industrial applications.

Development of physics-based models and design optimization of power electronic conversion systems

The main objective for physics based modeling of the power converter components is to design the whole converter with respect to physical and operational constraints. Therefore, all the elements and components of the energy conversion system are modeled numerically and combined together to achieve the whole system behavioral model. Previously proposed high frequency (HF) models of power converters are based on circuit models that are only related to the parasitic inner parameters of the power devices and the connections between the components. This dissertation aims to obtain appropriate physics-based models for power conversion systems, which not only can represent the steady state behavior of the components, but also can predict their high frequency characteristics. The developed physics-based model would represent the physical device with a high level of accuracy in predicting its operating condition. The proposed physics-based model enables us to accurately develop components such as; effective EMI filters, switching algorithms and circuit topologies [7]. One of the applications of the developed modeling technique is design of new sets of topologies for high-frequency, high efficiency converters for variable speed drives. The main advantage of the modeling method, presented in this dissertation, is the practical design of an inverter for high power applications with the ability to overcome the blocking voltage limitations of available power semiconductor devices. Another advantage is selection of the best matching topology with inherent reduction of switching losses which can be utilized to improve the overall efficiency. The physics-based modeling approach, in this dissertation, makes it possible to design any power electronic conversion system to meet electromagnetic standards and design constraints. This includes physical characteristics such as; decreasing the size and weight of the package, optimized interactions with the neighboring components and higher power density. In addition, the electromagnetic behaviors and signatures can be evaluated including the study of conducted and radiated EMI interactions in addition to the design of attenuation measures and enclosures.

Development of hardware in the loop real-time control techniques for hybrid power systems involving distributed demands and sustainable energy sources

The future power grid will effectively utilize renewable energy resources and distributed generation to respond to energy demand while incorporating information technology and communication infrastructure for their optimum operation. This dissertation contributes to the development of real-time techniques, for wide-area monitoring and secure real-time control and operation of hybrid power systems. ^ To handle the increased level of real-time data exchange, this dissertation develops a supervisory control and data acquisition (SCADA) system that is equipped with a state estimation scheme from the real-time data. This system is verified on a specially developed laboratory-based test bed facility, as a hardware and software platform, to emulate the actual scenarios of a real hybrid power system with the highest level of similarities and capabilities to practical utility systems. It includes phasor measurements at hundreds of measurement points on the system. These measurements were obtained from especially developed laboratory based Phasor Measurement Unit (PMU) that is utilized in addition to existing commercially based PMU’s. The developed PMU was used in conjunction with the interconnected system along with the commercial PMU’s. The tested studies included a new technique for detecting the partially islanded micro grids in addition to several real-time techniques for synchronization and parameter identifications of hybrid systems. ^ Moreover, due to numerous integration of renewable energy resources through DC microgrids, this dissertation performs several practical cases for improvement of interoperability of such systems. Moreover, increased number of small and dispersed generating stations and their need to connect fast and properly into the AC grids, urged this work to explore the challenges that arise in synchronization of generators to the grid and through introduction of a Dynamic Brake system to improve the process of connecting distributed generators to the power grid.^ Real time operation and control requires data communication security. A research effort in this dissertation was developed based on Trusted Sensing Base (TSB) process for data communication security. The innovative TSB approach improves the security aspect of the power grid as a cyber-physical system. It is based on available GPS synchronization technology and provides protection against confidentiality attacks in critical power system infrastructures. ^

Analysis of the lateral diffuse metal-oxide semiconductor (LDMOS) power amplifier for cellular base stations

The primary purpose of this thesis was to present a theoretical large-signal analysis to study the power gain and efficiency of a microwave power amplifier for LS-band communications using software simulation. Power gain, efficiency, reliability, and stability are important characteristics in the power amplifier design process. These characteristics affect advance wireless systems, which require low-cost device amplification without sacrificing system performance. Large-signal modeling and input and output matching components are used for this thesis. Motorola's Electro Thermal LDMOS model is a new transistor model that includes self-heating affects and is capable of small-large signal simulations. It allows for most of the design considerations to be on stability, power gain, bandwidth, and DC requirements. The matching technique allows for the gain to be maximized at a specific target frequency. Calculations and simulations for the microwave power amplifier design were performed using Matlab and Microwave Office respectively. Microwave Office is the simulation software used in this thesis. The study demonstrated that Motorola's Electro Thermal LDMOS transistor in microwave power amplifier design process is a viable solution for common-source amplifier applications in high power base stations. The MET-LDMOS met the stability requirements for the specified frequency range without a stability-improvement model. The power gain of the amplifier circuit was improved through proper microwave matching design using input/output-matching techniques. The gain and efficiency of the amplifier improve approximately 4dB and 7.27% respectively. The gain value is roughly .89 dB higher than the maximum gain specified by the MRF21010 data sheet specifications. This work can lead to efficient modeling and development of high power LDMOS transistor implementations in commercial and industry applications.

Development of Physics-based Models and Design Optimization of Power Electronic Conversion Systems

The main objective for physics based modeling of the power converter components is to design the whole converter with respect to physical and operational constraints. Therefore, all the elements and components of the energy conversion system are modeled numerically and combined together to achieve the whole system behavioral model. Previously proposed high frequency (HF) models of power converters are based on circuit models that are only related to the parasitic inner parameters of the power devices and the connections between the components. This dissertation aims to obtain appropriate physics-based models for power conversion systems, which not only can represent the steady state behavior of the components, but also can predict their high frequency characteristics. The developed physics-based model would represent the physical device with a high level of accuracy in predicting its operating condition. The proposed physics-based model enables us to accurately develop components such as; effective EMI filters, switching algorithms and circuit topologies [7]. One of the applications of the developed modeling technique is design of new sets of topologies for high-frequency, high efficiency converters for variable speed drives. The main advantage of the modeling method, presented in this dissertation, is the practical design of an inverter for high power applications with the ability to overcome the blocking voltage limitations of available power semiconductor devices. Another advantage is selection of the best matching topology with inherent reduction of switching losses which can be utilized to improve the overall efficiency. The physics-based modeling approach, in this dissertation, makes it possible to design any power electronic conversion system to meet electromagnetic standards and design constraints. This includes physical characteristics such as; decreasing the size and weight of the package, optimized interactions with the neighboring components and higher power density. In addition, the electromagnetic behaviors and signatures can be evaluated including the study of conducted and radiated EMI interactions in addition to the design of attenuation measures and enclosures.