A digital signal processing approach for affective sensing of a computer user through pupil diameter monitoring

Recent research has indicated that the pupil diameter (PD) in humans varies with their affective states. However, this signal has not been fully investigated for affective sensing purposes in human-computer interaction systems. This may be due to the dominant separate effect of the pupillary light reflex (PLR), which shrinks the pupil when light intensity increases. In this dissertation, an adaptive interference canceller (AIC) system using the H∞ time-varying (HITV) adaptive algorithm was developed to minimize the impact of the PLR on the measured pupil diameter signal. The modified pupil diameter (MPD) signal, obtained from the AIC was expected to reflect primarily the pupillary affective responses (PAR) of the subject. Additional manipulations of the AIC output resulted in a processed MPD (PMPD) signal, from which a classification feature, PMPDmean, was extracted. This feature was used to train and test a support vector machine (SVM), for the identification of stress states in the subject from whom the pupil diameter signal was recorded, achieving an accuracy rate of 77.78%. The advantages of affective recognition through the PD signal were verified by comparatively investigating the classification of stress and relaxation states through features derived from the simultaneously recorded galvanic skin response (GSR) and blood volume pulse (BVP) signals, with and without the PD feature. The discriminating potential of each individual feature extracted from GSR, BVP and PD was studied by analysis of its receiver operating characteristic (ROC) curve. The ROC curve found for the PMPDmean feature encompassed the largest area (0.8546) of all the single-feature ROCs investigated. The encouraging results seen in affective sensing based on pupil diameter monitoring were obtained in spite of intermittent illumination increases purposely introduced during the experiments. Therefore, these results confirmed the benefits of using the AIC implementation with the HITV adaptive algorithm to isolate the PAR and the potential of using PD monitoring to sense the evolving affective states of a computer user.

Influence of habitat on the reproductive ecology of the Amazonian palm, Mauritia flexuosa, in Roraima, Brazil

Although Mauritia flexuosa (Arecaceae) plays a pivotal role in the ecology and economy of the Amazon, and occurs in a variety of habitats, little is known about the influence of habitat on the reproductive biology of this palm. My dissertation focuses on the reproductive biology of M. flexuosa in three habitats in Roraima, Brazil: undisturbed forest, undisturbed forest-savanna ecotone, and savanna disturbed by plantations of the exotic tree, Acacia mangium. First, I calculated sex ratios and linked precipitation patterns with phenology. Sex ratios were female-biased. Precipitation was negatively associated with flowering, and positively associated with fruiting. Habitat appears to have no significant influence on phenology of M. flexuosa, although short-term climate variation may affect phenology of this species. Second, I examined floral biology, observed floral visitors, and performed exclusion experiments to determine the pollination system of M. flexuosa. Fruit set did not differ significantly between the visitor exclusion treatment and the control, but was significantly lowest in the wind + visitor exclusion treatment, suggesting that this dioecious palm is anemophilous, independent of habitat. Third, I identified the abiotic and biotic factors explaining variation in fruit mass, seed mass, seed number per fruit, and total fruit yield among habitats. Soil moisture and flooding during the wet season were the best predictors of fruit and seed output. The number of leaves, diameter at breast height, and height were all accurate predictors of reproductive output, but crown volume did not accurately predict fruit yields. Results re-evaluate traditional assumptions about wind-pollination in the tropics, and highlight abiotic and biotic factors responsible for variation in reproductive output of M. flexuosa, with implications for effective management of this palm. Finally, I interviewed harvesters and vendors to document the traditional knowledge and market dynamics of the fruit of M. flexuosa, buriti. Traditional knowledge corroborated results from scientific studies. Vendors argued that the price of buriti must increase, and must fluctuate with varying supply. With appropriate economic incentives to vendors/harvesters, Roraima may expand its market infrastructure for buriti, effectively stimulating the regional economy and practicing sustainable harvesting.

A model for continuous measurement of drilled shaft diameter during construction

Non-Destructive Testing (NDT) of deep foundations has become an integral part of the industry's standard manufacturing processes. It is not unusual for the evaluation of the integrity of the concrete to include the measurement of ultrasonic wave speeds. Numerous methods have been proposed that use the propagation speed of ultrasonic waves to check the integrity of concrete for drilled shaft foundations. All such methods evaluate the integrity of the concrete inside the cage and between the access tubes. The integrity of the concrete outside the cage remains to be considered to determine the location of the border between the concrete and the soil in order to obtain the diameter of the drilled shaft. It is also economic to devise a methodology to obtain the diameter of the drilled shaft using the Cross-Hole Sonic Logging system (CSL). Performing such a methodology using the CSL and following the CSL tests is performed and used to check the integrity of the inside concrete, thus allowing the determination of the drilled shaft diameter without having to set up another NDT device.^ This proposed new method is based on the installation of galvanized tubes outside the shaft across from each inside tube, and performing the CSL test between the inside and outside tubes. From the performed experimental work a model is developed to evaluate the relationship between the thickness of concrete and the ultrasonic wave properties using signal processing. The experimental results show that there is a direct correlation between concrete thicknesses outside the cage and maximum amplitude of the received signal obtained from frequency domain data. This study demonstrates how this new method to measuring the diameter of drilled shafts during construction using a NDT method overcomes the limitations of currently-used methods. ^ In the other part of study, a new method is proposed to visualize and quantify the extent and location of the defects. It is based on a color change in the frequency amplitude of the signal recorded by the receiver probe in the location of defects and it is called Frequency Tomography Analysis (FTA). Time-domain data is transferred to frequency-domain data of the signals propagated between tubes using Fast Fourier Transform (FFT). Then, distribution of the FTA will be evaluated. This method is employed after CSL has determined the high probability of an anomaly in a given area and is applied to improve location accuracy and to further characterize the feature. The technique has a very good resolution and clarifies the exact depth location of any void or defect through the length of the drilled shaft for the voids inside the cage. ^ The last part of study also evaluates the effect of voids inside and outside the reinforcement cage and corrosion in the longitudinal bars on the strength and axial load capacity of drilled shafts. The objective is to quantify the extent of loss in axial strength and stiffness of drilled shafts due to presence of different types of symmetric voids and corrosion throughout their lengths.^

A Digital Signal Processing Approach for Affective Sensing of a Computer User through Pupil Diameter Monitoring

Recent research has indicated that the pupil diameter (PD) in humans varies with their affective states. However, this signal has not been fully investigated for affective sensing purposes in human-computer interaction systems. This may be due to the dominant separate effect of the pupillary light reflex (PLR), which shrinks the pupil when light intensity increases. In this dissertation, an adaptive interference canceller (AIC) system using the H∞ time-varying (HITV) adaptive algorithm was developed to minimize the impact of the PLR on the measured pupil diameter signal. The modified pupil diameter (MPD) signal, obtained from the AIC was expected to reflect primarily the pupillary affective responses (PAR) of the subject. Additional manipulations of the AIC output resulted in a processed MPD (PMPD) signal, from which a classification feature, PMPDmean, was extracted. This feature was used to train and test a support vector machine (SVM), for the identification of stress states in the subject from whom the pupil diameter signal was recorded, achieving an accuracy rate of 77.78%. The advantages of affective recognition through the PD signal were verified by comparatively investigating the classification of stress and relaxation states through features derived from the simultaneously recorded galvanic skin response (GSR) and blood volume pulse (BVP) signals, with and without the PD feature. The discriminating potential of each individual feature extracted from GSR, BVP and PD was studied by analysis of its receiver operating characteristic (ROC) curve. The ROC curve found for the PMPDmean feature encompassed the largest area (0.8546) of all the single-feature ROCs investigated. The encouraging results seen in affective sensing based on pupil diameter monitoring were obtained in spite of intermittent illumination increases purposely introduced during the experiments. Therefore, these results confirmed the benefits of using the AIC implementation with the HITV adaptive algorithm to isolate the PAR and the potential of using PD monitoring to sense the evolving affective states of a computer user.

Left to right: Gustavo Rubio and Melissa Romigh measuring diameter at breast height (DBH) of mangrove trees at SRS-6, Shark River Slough

This material is based upon work supported by the National Science Foundation through the Florida Coastal Everglades Long-Term Ecological Research program under Cooperative Agreements #DBI-0620409 and #DEB-9910514. This image is made available for non-commercial or educational use only.

Left to right: Jay Sah and Nilesh Timilsina measuring diameter at breast height in mangrove forests damaged by Hurricane Wilma, Harney River

This material is based upon work supported by the National Science Foundation through the Florida Coastal Everglades Long-Term Ecological Research program under Cooperative Agreements #DBI-0620409 and #DEB-9910514. This image is made available for non-commercial or educational use only.

Influence of Habitat on the Reproductive Ecology of the Amazonian Palm, Mauritia flexuosa, in Roraima, Brazil

Although Mauritia flexuosa (Arecaceae) plays a pivotal role in the ecology and economy of the Amazon, and occurs in a variety of habitats, little is known about the influence of habitat on the reproductive biology of this palm. My dissertation focuses on the reproductive biology of M. flexuosa in three habitats in Roraima, Brazil: undisturbed forest, undisturbed forest-savanna ecotone, and savanna disturbed by plantations of the exotic tree, Acacia mangium. First, I calculated sex ratios and linked precipitation patterns with phenology. Sex ratios were female-biased. Precipitation was negatively associated with flowering, and positively associated with fruiting. Habitat appears to have no significant influence on phenology of M. flexuosa, although short-term climate variation may affect phenology of this species. Second, I examined floral biology, observed floral visitors, and performed exclusion experiments to determine the pollination system of M. flexuosa. Fruit set did not differ significantly between the visitor exclusion treatment and the control, but was significantly lowest in the wind + visitor exclusion treatment, suggesting that this dioecious palm is anemophilous, independent of habitat. Third, I identified the abiotic and biotic factors explaining variation in fruit mass, seed mass, seed number per fruit, and total fruit yield among habitats. Soil moisture and flooding during the wet season were the best predictors of fruit and seed output. The number of leaves, diameter at breast height, and height were all accurate predictors of reproductive output, but crown volume did not accurately predict fruit yields. Results re-evaluate traditional assumptions about wind-pollination in the tropics, and highlight abiotic and biotic factors responsible for variation in reproductive output of M. flexuosa, with implications for effective management of this palm. Finally, I interviewed harvesters and vendors to document the traditional knowledge and market dynamics of the fruit of M. flexuosa, buriti. Traditional knowledge corroborated results from scientific studies. Vendors argued that the price of buriti must increase, and must fluctuate with varying supply. With appropriate economic incentives to vendors/harvesters, Roraima may expand its market infrastructure for buriti, effectively stimulating the regional economy and practicing sustainable harvesting.

A Model for Continuous Measurement of Drilled Shaft Diameter During Construction

Non-Destructive Testing (NDT) of deep foundations has become an integral part of the industry’s standard manufacturing processes. It is not unusual for the evaluation of the integrity of the concrete to include the measurement of ultrasonic wave speeds. Numerous methods have been proposed that use the propagation speed of ultrasonic waves to check the integrity of concrete for drilled shaft foundations. All such methods evaluate the integrity of the concrete inside the cage and between the access tubes. The integrity of the concrete outside the cage remains to be considered to determine the location of the border between the concrete and the soil in order to obtain the diameter of the drilled shaft. It is also economic to devise a methodology to obtain the diameter of the drilled shaft using the Cross-Hole Sonic Logging system (CSL). Performing such a methodology using the CSL and following the CSL tests is performed and used to check the integrity of the inside concrete, thus allowing the determination of the drilled shaft diameter without having to set up another NDT device. This proposed new method is based on the installation of galvanized tubes outside the shaft across from each inside tube, and performing the CSL test between the inside and outside tubes. From the performed experimental work a model is developed to evaluate the relationship between the thickness of concrete and the ultrasonic wave properties using signal processing. The experimental results show that there is a direct correlation between concrete thicknesses outside the cage and maximum amplitude of the received signal obtained from frequency domain data. This study demonstrates how this new method to measuring the diameter of drilled shafts during construction using a NDT method overcomes the limitations of currently-used methods. In the other part of study, a new method is proposed to visualize and quantify the extent and location of the defects. It is based on a color change in the frequency amplitude of the signal recorded by the receiver probe in the location of defects and it is called Frequency Tomography Analysis (FTA). Time-domain data is transferred to frequency-domain data of the signals propagated between tubes using Fast Fourier Transform (FFT). Then, distribution of the FTA will be evaluated. This method is employed after CSL has determined the high probability of an anomaly in a given area and is applied to improve location accuracy and to further characterize the feature. The technique has a very good resolution and clarifies the exact depth location of any void or defect through the length of the drilled shaft for the voids inside the cage. The last part of study also evaluates the effect of voids inside and outside the reinforcement cage and corrosion in the longitudinal bars on the strength and axial load capacity of drilled shafts. The objective is to quantify the extent of loss in axial strength and stiffness of drilled shafts due to presence of different types of symmetric voids and corrosion throughout their lengths.