The non-timber forest products sector in nepal : policy issues in plant conservation and utilization

The non-timber forest products (NTFPs) sector in Nepal is being promoted with the concept of sustainable management as articulated by the Convention on Biological Diversity. To promote and regulate this sector, Nepal adopted the Herbs and NTFP Development Policy in 2004. The goal of this thesis was to assess the effectiveness of this policy along with other forestry and natural resource policies in Nepal concerning the conservation and sustainable use of NTFPs. I conducted open-ended semi-structured interviews with 28 key informants in summer 2006 in Nepal where I also collected relevant documents and publications. I did qualitative analysis of data obtained from interviews and document review. The research found many important issues that need to be addressed to promote the NTFP sector as envisioned by the Government of Nepal. The findings of this research will help to further implement the policy and promote the NTFP sector through sustainable management practices.

Analysis of global compliance and implementation of the goals of international environmental treaties: A case study of the Convention on Biodiversity (CBD)

The Convention on Biodiversity (CBD) was created in 1992 to coordinate global governments to protect biological resources. The CBD has three goals: protection of biodiversity, achievement of sustainable use of biodiversity and facilitation of equitable sharing of the benefits of biological resources. The goal of protecting biological resources has remained both controversial and difficult to implement. This study focused more on the goal of biodiversity protection. The research was designed to examine how globally constructed environmental policies get adapted by national governments and then passed down to local levels where actual implementation takes place. Effectiveness of such policies depends on the extent of actual implementation at local levels. Therefore, compliance was divided and examined at three levels: global, national and local. The study then developed various criteria to measure compliance at these levels. Both qualitative and quantitative methods were used to analyze compliance and implementation. The study was guided by three questions broadly examining critical factors that most influence the implementation of biodiversity protection policies at the global, national and local levels. Findings show that despite an overall biodiversity deficit of 0.9 hectares per person, global compliance with the CBD goals is currently at 35%. Compliance is lowest at local levels at 14%, it is slightly better at national level at 50%, and much better at the international level 64%. Compliance appears higher at both national and international levels because compliance here is paper work based and policy formulation. If implementation at local levels continues to produce this low compliance, overall conservation outcomes can only get worse than what it is at present. There are numerous weaknesses and capacity challenges countries are yet to address in their plans. In order to increase local level compliance, the study recommends a set of robust policies that build local capacity, incentivize local resource owners, and implement biodiversity protection programs that are akin to local needs and aspirations.^

Analysis of Global Compliance and Implementation of the Goals of International Environmental Treaties: A Case study of the Convention on Biodiversity (CBD)

The Convention on Biodiversity (CBD) was created in 1992 to coordinate global governments to protect biological resources. The CBD has three goals: protection of biodiversity, achievement of sustainable use of biodiversity and facilitation of equitable sharing of the benefits of biological resources. The goal of protecting biological resources has remained both controversial and difficult to implement. This study focused more on the goal of biodiversity protection. The research was designed to examine how globally constructed environmental policies get adapted by national governments and then passed down to local levels where actual implementation takes place. Effectiveness of such policies depends on the extent of actual implementation at local levels. Therefore, compliance was divided and examined at three levels: global, national and local. The study then developed various criteria to measure compliance at these levels. Both qualitative and quantitative methods were used to analyze compliance and implementation. The study was guided by three questions broadly examining critical factors that most influence the implementation of biodiversity protection policies at the global, national and local levels. Findings show that despite an overall biodiversity deficit of 0.9 hectares per person, global compliance with the CBD goals is currently at 35%. Compliance is lowest at local levels at 14%, it is slightly better at national level at 50%, and much better at the international level 64%. Compliance appears higher at both national and international levels because compliance here is paper work based and policy formulation. If implementation at local levels continues to produce this low compliance, overall conservation outcomes can only get worse than what it is at present. There are numerous weaknesses and capacity challenges countries are yet to address in their plans. In order to increase local level compliance, the study recommends a set of robust policies that build local capacity, incentivize local resource owners, and implement biodiversity protection programs that are akin to local needs and aspirations.

Diversity patterns of amphibians in lowland Amazonian forests in southeastern Peru

Biological diversity is threatened worldwide and it is a priority to generate more information that can be used both for understanding ecological processes and determining conservation strategies. For my dissertation, I focused on amphibian diversity patterns in lowland rainforests of southwestern Amazonia to evaluate the importance of habitat heterogeneity in the region. My main purpose was to test the hypothesis that amphibian communities in different forest types differ in species richness, composition, and abundance. I used standardized visual encounter surveys to quantify the species composition and abundance of amphibians at four sites, each containing four forest types (floodplain, terra firme, bamboo, and palm swamp). I used leaf-litter plots to evaluate the effect of soil and leaf-litter characteristics on species richness and abundance of leaf-litter frogs. I intensively sampled at one site and then sampled three other sites (distance among sites varied 3.5–105 km) to evaluate whether the patterns observed at one site were similar elsewhere. I also updated the information on threatened and potentially threatened amphibians in Peru and my study region. I found that no species appears to have experienced population declines in southeastern Peru, suggesting that the region still contains the original species pool. My results support the hypothesis that amphibian communities differ across forest types and that patterns observed at the local scale (one site) are similar at the regional scale (four sites). My data also indicate that there is no correlation between species composition and geographic distance among sites. Instead, an important proportion of the gamma diversity is represented by habitat-related beta diversity. My leaf-litter plot data showed that part of the variation in the leaf-litter community structure is explained by soil and litter characteristics. I found that soil total phosphorus and, to a lesser extent, humidity, leaf-litter mass, and pH is linked to species presence/absence and abundance. My study provides the first standardized, quantitative comparison of amphibian community structure across four major forest types in southwestern Amazonia and highlights the fact that forest types are complementary and necessary for maintaining high species richness in the region.

Diversity Patterns of Amphibians in Lowland Amazonian Forests in Southeastern Peru

Biological diversity is threatened worldwide and it is a priority to generate more information that can be used both for understanding ecological processes and determining conservation strategies. For my dissertation, I focused on amphibian diversity patterns in lowland rainforests of southwestern Amazonia to evaluate the importance of habitat heterogeneity in the region. My main purpose was to test the hypothesis that amphibian communities in different forest types differ in species richness, composition, and abundance. I used standardized visual encounter surveys to quantify the species composition and abundance of amphibians at four sites, each containing four forest types (floodplain, terra firme, bamboo, and palm swamp). I used leaf-litter plots to evaluate the effect of soil and leaf-litter characteristics on species richness and abundance of leaf-litter frogs. I intensively sampled at one site and then sampled three other sites (distance among sites varied 3.5-105 km) to evaluate whether the patterns observed at one site were similar elsewhere. I also updated the information on threatened and potentially threatened amphibians in Peru and my study region. I found that no species appears to have experienced population declines in southeastern Peru, suggesting that the region still contains the original species pool. My results support the hypothesis that amphibian communities differ across forest types and that patterns observed at the local scale (one site) are similar at the regional scale (four sites). My data also indicate that there is no correlation between species composition and geographic distance among sites. Instead, an important proportion of the gamma diversity is represented by habitat-related beta diversity. My leaf-litter plot data showed that part of the variation in the leaf-litter community structure is explained by soil and litter characteristics. I found that soil total phosphorus and, to a lesser extent, humidity, leaf-litter mass, and pH is linked to species presence/absence and abundance. My study provides the first standardized, quantitative comparison of amphibian community structure across four major forest types in southwestern Amazonia and highlights the fact that forest types are complementary and necessary for maintaining high species richness in the region.

Herbivore and nutrient impact on primary producer assemblages in a tropical marine environment

Globally, human populations are increasing and coastal ecosystems are becoming increasingly impacted by anthropogenic stressors. As eutrophication and exploitation of coastal resources increases, primary producer response to these drivers becomes a key indicator of ecosystem stability. Despite the importance of monitoring primary producers such as seagrasses and macroalgae, detailed studies on the response of these benthic habitat components to drivers remain relatively sparse. Utilizing a multi-faceted examination of turtle-seagrass and sea urchin-macroalgae consumer and nutrient dynamics, I elucidate the impact of these drivers in Akumal, Quintana Roo, Mexico. In Yal Ku Lagoon, macroalgae bioindicators signified high nutrient availability, which is important for further studies, but did not consistently follow published trends reflecting decreased δ 15N content with distance from suspected source. In Akumal Bay, eutrophication and grazing by turtles and fishes combine to structure patches within the seagrass beds. Grazed seagrass patches had higher structural complexity and productivity than patches continually grazed by turtles and fishes. Results from this study indicate that patch abandonment may follow giving-up density theory, the first to be recorded in the marine environment. As Diadema antillarum populations recover after their massive mortality thirty years ago, the role these echinoids will have in reducing macroalgae cover and altering ecosystem state remains to be clear. Although Diadema antillarum densities within the coral reef ecosystem were comparable to other regions within the Caribbean, the echinoid population in Akumal Bay was an insufficient driver to prevent dominance of a turf-algal-sediment (TAS) state. After a four year study, declining coral cover coupled with increased algal cover suggests that the TAS-dominated state is likely to persist over time despite echinoid recovery. Studies on macroalgal diversity and nutrients within this same region of echinoids indicated diversity and nutrient content of macroalgae increased, which may further increase the persistence of the algal-dominated state. This study provides valuable insight into the variable effects of herbivores and nutrients on primary producers within a tropical coastal ecosystem. Results from this work challenge many of the currently accepted theories on primary producer response to nutrients and herbivory while providing a framework for further studies into these dynamics.

Site specific growth of metal catalyzed silica nanowires for biological and chemical sensing

In this research the integration of nanostructures and micro-scale devices was investigated using silica nanowires to develop a simple yet robust nanomanufacturing technique for improving the detection parameters of chemical and biological sensors. This has been achieved with the use of a dielectric barrier layer, to restrict nanowire growth to site-specific locations which has removed the need for post growth processing, by making it possible to place nanostructures on pre-pattern substrates. Nanowires were synthesized using the Vapor-Liquid-Solid growth method. Process parameters (temperature and time) and manufacturing aspects (structural integrity and biocompatibility) were investigated. Silica nanowires were observed experimentally to determine how their physical and chemical properties could be tuned for integration into existing sensing structures. Growth kinetic experiments performed using gold and palladium catalysts at 1050°C for 60 minutes in an open-tube furnace yielded dense and consistent silica nanowire growth. This consistent growth led to the development of growth model fitting, through use of the Maximum Likelihood Estimation (MLE) and Bayesian hierarchical modeling. Transmission electron microscopy studies revealed the nanowires to be amorphous and X-ray diffraction confirmed the composition to be SiO2 . Silica nanowires were monitored in epithelial breast cancer media using Impedance spectroscopy, to test biocompatibility, due to potential in vivo use as a diagnostic aid. It was found that palladium catalyzed silica nanowires were toxic to breast cancer cells, however, nanowires were inert at 1μg/mL concentrations. Additionally a method for direct nanowire integration was developed that allowed for silica nanowires to be grown directly into interdigitated sensing structures. This technique eliminates the need for physical nanowire transfer thus preserving nanowire structure and performance integrity and further reduces fabrication cost. Successful nanowire integration was physically verified using Scanning electron microscopy and confirmed electrically using Electrochemical Impedance Spectroscopy of immobilized Prostate Specific Antigens (PSA). The experiments performed above serve as a guideline to addressing the metallurgic challenges in nanoscale integration of materials with varying composition and to understanding the effects of nanomaterials on biological structures that come in contact with the human body.

Site Specifc Growth of Metal Catalyzed Silica Nanowires for Biological and Chemical Sensing

In this research the integration of nanostructures and micro-scale devices was investigated using silica nanowires to develop a simple yet robust nanomanufacturing technique for improving the detection parameters of chemical and biological sensors. This has been achieved with the use of a dielectric barrier layer, to restrict nanowire growth to site-specific locations which has removed the need for post growth processing, by making it possible to place nanostructures on pre-pattern substrates. Nanowires were synthesized using the Vapor-Liquid-Solid growth method. Process parameters (temperature and time) and manufacturing aspects (structural integrity and biocompatibility) were investigated. Silica nanowires were observed experimentally to determine how their physical and chemical properties could be tuned for integration into existing sensing structures. Growth kinetic experiments performed using gold and palladium catalysts at 1050 ˚C for 60 minutes in an open-tube furnace yielded dense and consistent silica nanowire growth. This consistent growth led to the development of growth model fitting, through use of the Maximum Likelihood Estimation (MLE) and Bayesian hierarchical modeling. Transmission electron microscopy studies revealed the nanowires to be amorphous and X-ray diffraction confirmed the composition to be SiO2 . Silica nanowires were monitored in epithelial breast cancer media using Impedance spectroscopy, to test biocompatibility, due to potential in vivo use as a diagnostic aid. It was found that palladium catalyzed silica nanowires were toxic to breast cancer cells, however, nanowires were inert at 1µg/mL concentrations. Additionally a method for direct nanowire integration was developed that allowed for silica nanowires to be grown directly into interdigitated sensing structures. This technique eliminates the need for physical nanowire transfer thus preserving nanowire structure and performance integrity and further reduces fabrication cost. Successful nanowire integration was physically verified using Scanning electron microscopy and confirmed electrically using Electrochemical Impedance Spectroscopy of immobilized Prostate Specific Antigens (PSA). The experiments performed above serve as a guideline to addressing the metallurgic challenges in nanoscale integration of materials with varying composition and to understanding the effects of nanomaterials on biological structures that come in contact with the human body.