Computational modeling of intermediate temperature proton exchange membrane (PEM) fuel cells

A two-phase three-dimensional computational model of an intermediate temperature (120--190°C) proton exchange membrane (PEM) fuel cell is presented. This represents the first attempt to model PEM fuel cells employing intermediate temperature membranes, in this case, phosphoric acid doped polybenzimidazole (PBI). To date, mathematical modeling of PEM fuel cells has been restricted to low temperature operation, especially to those employing Nafion ® membranes; while research on PBI as an intermediate temperature membrane has been solely at the experimental level. This work is an advancement in the state of the art of both these fields of research. With a growing trend toward higher temperature operation of PEM fuel cells, mathematical modeling of such systems is necessary to help hasten the development of the technology and highlight areas where research should be focused.^ This mathematical model accounted for all the major transport and polarization processes occurring inside the fuel cell, including the two phase phenomenon of gas dissolution in the polymer electrolyte. Results were presented for polarization performance, flux distributions, concentration variations in both the gaseous and aqueous phases, and temperature variations for various heat management strategies. The model predictions matched well with published experimental data, and were self-consistent.^ The major finding of this research was that, due to the transport limitations imposed by the use of phosphoric acid as a doping agent, namely low solubility and diffusivity of dissolved gases and anion adsorption onto catalyst sites, the catalyst utilization is very low (∼1--2%). Significant cost savings were predicted with the use of advanced catalyst deposition techniques that would greatly reduce the eventual thickness of the catalyst layer, and subsequently improve catalyst utilization. The model also predicted that an increase in power output in the order of 50% is expected if alternative doping agents to phosphoric acid can be found, which afford better transport properties of dissolved gases, reduced anion adsorption onto catalyst sites, and which maintain stability and conductive properties at elevated temperatures.^

Testing and Expanding an Emotion-Centered Model of Workplace Aggression: The Moderating Effects of Perceived Intensity and Social Support in the Workplace

The purpose of this thesis was to examine the mediating effects of job-related negative emotions on the relationship between workplace aggression and outcomes. Additionally, the moderating effects of workplace social support and intensity of workplace aggression are considered. A total 321 of working individuals participated through an online survey. The results of this thesis suggest that job-related negative emotions are a mediator of the relationship between workplace aggression and outcomes, with full and partial mediation supported. Workplace social support was found to be a buffering variable in the relationship between workplace aggression and outcomes, regardless of the source of aggression (supervisor or co-worker) or the source of the social support. Finally, intensity of aggression was found to be a strong moderator of the relationship between workplace aggression and outcomes.

Comparative analysis of a moderating and mediating model of stress, appraisal, and coping in Hispanic and non-Hispanic Alzheimer's disease caregivers

This dissertation utilizes a cross-sectional study to examine the phenomenon of caregiving within a theoretically grounded stress, appraisal, and coping model. Hispanic and non-Hispanic caregivers were studied to examine the factors associated with variance in caregiver appraisal, coping, and outcomes of caregiving strain (depression and somatic complaints) and caregiving gain (life satisfaction, mastery, and personal gain). A purposive sampling strategy was used to recruit 204 Alzheimer's disease caregivers in South Florida. A self-report questionnaire was used to collect demographic data, and to measure stress, appraisal, coping, and psychological well-being of caregivers. Regression equations were developed to compare moderating and mediating models of appraisal and coping. Emotion-focused coping skills were found to significantly moderate the effects of stress (F [1,195] = 4.62, p < .05), explaining approximately 21% of the variance in satisfaction was found to moderate the effects of stress (F [1,195] = 7.09; p < .05), explaining approximately 27% of the variance in personal gain and approximately 8% of the variance in life satisfaction (F [1,195] = 4.14; p < .05). Appraisal of Burden was found to significantly mediate the effects of stress, explaining approximately 30% of the variance in somatic complaints (F [1,196] = 31.60; p < .001) and 32% of the variance in depression (F [1,196] = 38.18; p < .001). The results of the analyses indicate that appraisal and coping skills are important variables in the stress process. The results of this study underscore the importance of accounting for positive and negative outcomes in providing a fuller understanding of the stress, appraisal and coping process of Alzheimer's Disease caregivers. ^

An agent-based model of team coordination and performance

This research is based on the premises that teams can be designed to optimize its performance, and appropriate team coordination is a significant factor to team outcome performance. Contingency theory argues that the effectiveness of a team depends on the right fit of the team design factors to the particular job at hand. Therefore, organizations need computational tools capable of predict the performance of different configurations of teams. This research created an agent-based model of teams called the Team Coordination Model (TCM). The TCM estimates the coordination load and performance of a team, based on its composition, coordination mechanisms, and job’s structural characteristics. The TCM can be used to determine the team’s design characteristics that most likely lead the team to achieve optimal performance. The TCM is implemented as an agent-based discrete-event simulation application built using JAVA and Cybele Pro agent architecture. The model implements the effect of individual team design factors on team processes, but the resulting performance emerges from the behavior of the agents. These team member agents use decision making, and explicit and implicit mechanisms to coordinate the job. The model validation included the comparison of the TCM’s results with statistics from a real team and with the results predicted by the team performance literature. An illustrative 26-1 fractional factorial experimental design demonstrates the application of the simulation model to the design of a team. The results from the ANOVA analysis have been used to recommend the combination of levels of the experimental factors that optimize the completion time for a team that runs sailboats races. This research main contribution to the team modeling literature is a model capable of simulating teams working on complex job environments. The TCM implements a stochastic job structure model capable of capturing some of the complexity not capture by current models. In a stochastic job structure, the tasks required to complete the job change during the team execution of the job. This research proposed three new types of dependencies between tasks required to model a job as a stochastic structure. These dependencies are conditional sequential, single-conditional sequential, and the merge dependencies.

Computational evaluation of wind loads on low- and highrise buildings

Buildings and other infrastructures located in the coastal regions of the US have a higher level of wind vulnerability. Reducing the increasing property losses and causalities associated with severe windstorms has been the central research focus of the wind engineering community. The present wind engineering toolbox consists of building codes and standards, laboratory experiments, and field measurements. The American Society of Civil Engineers (ASCE) 7 standard provides wind loads only for buildings with common shapes. For complex cases it refers to physical modeling. Although this option can be economically viable for large projects, it is not cost-effective for low-rise residential houses. To circumvent these limitations, a numerical approach based on the techniques of Computational Fluid Dynamics (CFD) has been developed. The recent advance in computing technology and significant developments in turbulence modeling is making numerical evaluation of wind effects a more affordable approach. The present study targeted those cases that are not addressed by the standards. These include wind loads on complex roofs for low-rise buildings, aerodynamics of tall buildings, and effects of complex surrounding buildings. Among all the turbulence models investigated, the large eddy simulation (LES) model performed the best in predicting wind loads. The application of a spatially evolving time-dependent wind velocity field with the relevant turbulence structures at the inlet boundaries was found to be essential. All the results were compared and validated with experimental data. The study also revealed CFD's unique flow visualization and aerodynamic data generation capabilities along with a better understanding of the complex three-dimensional aerodynamics of wind-structure interactions. With the proper modeling that realistically represents the actual turbulent atmospheric boundary layer flow, CFD can offer an economical alternative to the existing wind engineering tools. CFD's easy accessibility is expected to transform the practice of structural design for wind, resulting in more wind-resilient and sustainable systems by encouraging optimal aerodynamic and sustainable structural/building design. Thus, this method will help ensure public safety and reduce economic losses due to wind perils.

A model of self -transformative identity development in troubled adolescent youth

Within the Stage II program evaluation of the Miami Youth Development Project's (YDP) Changing Lives Program (CLP), this study evaluated CLP intervention effectiveness in promoting positive change in emotion-focused identity exploration (i.e. feelings of personal expressiveness; PE) and a "negative" symptom of identity development (i.e. identity distress; ID) as a first step toward the investigation of a self-transformative model of identity development in adolescent youth. Using structural equation modeling techniques, this study found that participation in the CLP is associated with positive changes in PE (path = .841, p < .002), but not changes in ID. Increase in ID scores was found to be associated with increases in PE (path = .229, p < .002), as well. Intervention effects were not moderated by age/stage, gender, or ethnicity, though differences were found in the degree to which participating subgroups (African-American/Hispanic, male/female, 14-16 years old/17-19 years old) experience change in PE and ID. Findings also suggest that moderate levels of ID may not be deleterious to identity exploration and may be associated with active exploration. ^

A model of self-transformative identity development in troubled adolescent youth

Within the Stage II program evaluation of the Miami Youth Development Project's (YDP) Changing Lives Program (CLP), this study evaluated CLP intervention effectiveness in promoting positive change in emotion-focused identity exploration (i.e. feelings of personal expressiveness; PE) and a "negative" symptom of identity development (i.e. identity distress; ID) as a first step toward the investigation of a self-transformative model of identity development in adolescent youth. Using structural equation modeling techniques, this study found that participation in the CLP is associated with positive changes in PE (path = .841, p < .002), but not changes in ID. Increase in ID scores was found to be associated with increases in PE (path = .229, p < .002), as well. Intervention effects were not moderated by age/stage, gender, or ethnicity, though differences were found in the degree to which participating subgroups (African- American/Hispanic, male/female, 14-16 years old/17-19 years old) experience change in PE and ID. Findings also suggest that moderate levels of ID may not be deleterious to identity exploration and may be associated with active exploration.

Computational Evaluation of Wind Loads on Low- and High- Rise Buildings

Buildings and other infrastructures located in the coastal regions of the US have a higher level of wind vulnerability. Reducing the increasing property losses and causalities associated with severe windstorms has been the central research focus of the wind engineering community. The present wind engineering toolbox consists of building codes and standards, laboratory experiments, and field measurements. The American Society of Civil Engineers (ASCE) 7 standard provides wind loads only for buildings with common shapes. For complex cases it refers to physical modeling. Although this option can be economically viable for large projects, it is not cost-effective for low-rise residential houses. To circumvent these limitations, a numerical approach based on the techniques of Computational Fluid Dynamics (CFD) has been developed. The recent advance in computing technology and significant developments in turbulence modeling is making numerical evaluation of wind effects a more affordable approach. The present study targeted those cases that are not addressed by the standards. These include wind loads on complex roofs for low-rise buildings, aerodynamics of tall buildings, and effects of complex surrounding buildings. Among all the turbulence models investigated, the large eddy simulation (LES) model performed the best in predicting wind loads. The application of a spatially evolving time-dependent wind velocity field with the relevant turbulence structures at the inlet boundaries was found to be essential. All the results were compared and validated with experimental data. The study also revealed CFD’s unique flow visualization and aerodynamic data generation capabilities along with a better understanding of the complex three-dimensional aerodynamics of wind-structure interactions. With the proper modeling that realistically represents the actual turbulent atmospheric boundary layer flow, CFD can offer an economical alternative to the existing wind engineering tools. CFD’s easy accessibility is expected to transform the practice of structural design for wind, resulting in more wind-resilient and sustainable systems by encouraging optimal aerodynamic and sustainable structural/building design. Thus, this method will help ensure public safety and reduce economic losses due to wind perils.