Capacity-based cost modeling for light rail and bus rapid transit systems

Choosing between Light Rail Transit (LRT) and Bus Rapid Transit (BRT) systems is often controversial and not an easy task for transportation planners who are contemplating the upgrade of their public transportation services. These two transit systems provide comparable services for medium-sized cities from the suburban neighborhood to the Central Business District (CBD) and utilize similar right-of-way (ROW) categories. The research is aimed at developing a method to assist transportation planners and decision makers in determining the most feasible system between LRT and BRT. ^ Cost estimation is a major factor when evaluating a transit system. Typically, LRT is more expensive to build and implement than BRT, but has significantly lower Operating and Maintenance (OM) costs than BRT. This dissertation examines the factors impacting capacity and costs, and develops cost models, which are a capacity-based cost estimate for the LRT and BRT systems. Various ROW categories and alignment configurations of the systems are also considered in the developed cost models. Kikuchi's fleet size model (1985) and cost allocation method are used to develop the cost models to estimate the capacity and costs. ^ The comparison between LRT and BRT are complicated due to many possible transportation planning and operation scenarios. In the end, a user-friendly computer interface integrated with the established capacity-based cost models, the LRT and BRT Cost Estimator (LBCostor), was developed by using Microsoft Visual Basic language to facilitate the process and will guide the users throughout the comparison operations. The cost models and the LBCostor can be used to analyze transit volumes, alignments, ROW configurations, number of stops and stations, headway, size of vehicle, and traffic signal timing at the intersections. The planners can make the necessary changes and adjustments depending on their operating practices. ^

Optimization models for selecting bus stops for accessibility improvements for people with disabilities

Bus stops are key links in the journeys of transit patrons with disabilities. Inaccessible bus stops prevent people with disabilities from using fixed-route bus services, thus limiting their mobility. The Americans with Disabilities Act (ADA) of 1990 prescribes the minimum requirements for bus stop accessibility by riders with disabilities. Due to limited budgets, transit agencies can only select a limited number of bus stop locations for ADA improvements annually. These locations should preferably be selected such that they maximize the overall benefits to patrons with disabilities. In addition, transit agencies may also choose to implement the universal design paradigm, which involves higher design standards than current ADA requirements and can provide amenities that are useful for all riders, like shelters and lighting. Many factors can affect the decision to improve a bus stop, including rider-based aspects like the number of riders with disabilities, total ridership, customer complaints, accidents, deployment costs, as well as locational aspects like the location of employment centers, schools, shopping areas, and so on. These interlacing factors make it difficult to identify optimum improvement locations without the aid of an optimization model. This dissertation proposes two integer programming models to help identify a priority list of bus stops for accessibility improvements. The first is a binary integer programming model designed to identify bus stops that need improvements to meet the minimum ADA requirements. The second involves a multi-objective nonlinear mixed integer programming model that attempts to achieve an optimal compromise among the two accessibility design standards. Geographic Information System (GIS) techniques were used extensively to both prepare the model input and examine the model output. An analytic hierarchy process (AHP) was applied to combine all of the factors affecting the benefits to patrons with disabilities. An extensive sensitivity analysis was performed to assess the reasonableness of the model outputs in response to changes in model constraints. Based on a case study using data from Broward County Transit (BCT) in Florida, the models were found to produce a list of bus stops that upon close examination were determined to be highly logical. Compared to traditional approaches using staff experience, requests from elected officials, customer complaints, etc., these optimization models offer a more objective and efficient platform on which to make bus stop improvement suggestions.

Appropriate Selection Processes Are Available For Choosing Hospitality texts

First Student: "I know what you mean; I fall asleep every time I try to read this stuff." (Meanwhile, in the faculty lounge) First Professor: "I do not understand what's wrong with my students; they expect me to teach textbook information from the podium." Second Professor: "I've noticed the same thing. They do not want to be responsible for their readings. "

The relationship between job structure, burnout, and coping methods among public school county bus drivers, bus aides, mechanics, and clerical workers

The purpose of this study was to examine the relationship between the structure of jobs and burnout, and to assess to what extent, if any this relationship was moderated by individual coping methods. This study was supported by the Karasek's (1998) Job Demand-Control-Support theory of work stress as well as Maslach and Leiter's (1993) theory of burnout. Coping was examined as a moderator based on the conceptualization of Lazarus and Folkman (1984). ^ Two overall overarching questions framed this study: (a) what is the relationship between job structure, as operationalized by job title, and burnout across different occupations in support services in a large municipal school district? and (b) To what extent do individual differences in coping methods moderate this relationship? ^ This study was a cross-sectional study of county public school bus drivers, bus aides, mechanics, and clerical workers (N = 253) at three bus depot locations within the same district using validated survey instruments for data collection. Hypotheses were tested using simultaneous regression analyses. ^ Findings indicated that there were statistically significant and relevant relationships among the variables of interest; job demands, job control, burnout, and ways of coping. There was a relationship between job title and physical job demands. There was no evidence to support a relationship between job title and psychological demands. Furthermore, there was a relationship between physical demands, emotional exhaustion and personal accomplishment; key indicators of burnout. ^ Results showed significant correlations between individual ways of coping as a moderator between job structure, operationalized by job title, and individual employee burnout adding empirical evidence to the occupational stress literature. Based on the findings, there are implications for theory, research, and practice. For theory and research, the findings suggest the importance of incorporating transactional models in the study of occupational stress. In the area of practice, the findings highlight the importance of enriching jobs, increasing job control, and providing individual-level training related to stress reduction.^

Critical problem solving scale : creating and choosing alternative solutions

This thesis extends previous research on critical decision making and problem-solving by refining and validating a self-report measure designed to assess the use of critical decision making and problem solving in making life choices. The analysis was conducted by performing two studies, and therefore collecting two sets of data on the psychometric properties of the measure. Psychometric analyses included: item analysis, internal consistency reliability, interrater reliability, and an exploratory factor analysis. This study also included regression analysis with the Wonderlic, an established measure of general intelligence, to provide preliminary evidence for the construct validity of the measure.

Logical simulation of communication subsystem for Universal Serial Bus (USB)

The primary purpose of this thesis was to design a logical simulation of a communication sub block to be used in the effective communication of digital data between the host and the peripheral devices. The module designed is a Serial interface engine in the Universal Serial Bus that effectively controls the flow of data for communication between the host and the peripheral devices with the emphasis on the study of timing and control signals, considering the practical aspects of them. In this study an attempt was made to realize data communication in the hardware using the Verilog Hardware Description language, which is supported by most popular logic synthesis tools. Various techniques like Cyclic Redundancy Checks, bit-stuffing and Non Return to Zero are implemented in the design to provide enhanced performance of the module.

The Relationship between Job Structure, Burnout, and Coping Methods among Public School county Bus Drivers, Bus Aides, Mechanics, and Clerical Workers

The purpose of this study was to examine the relationship between the structure of jobs and burnout, and to assess to what extent, if any this relationship was moderated by individual coping methods. This study was supported by the Karasek's (1998) Job Demand-Control-Support theory of work stress as well as Maslach and Leiter's (1993) theory of burnout. Coping was examined as a moderator based on the conceptualization of Lazarus and Folkman (1984). Two overall overarching questions framed this study: (a) what is the relationship between job structure, as operationalized by job title, and burnout across different occupations in support services in a large municipal school district? and (b) To what extent do individual differences in coping methods moderate this relationship? This study was a cross-sectional study of county public school bus drivers, bus aides, mechanics, and clerical workers (N = 253) at three bus depot locations within the same district using validated survey instruments for data collection. Hypotheses were tested using simultaneous regression analyses. Findings indicated that there were statistically significant and relevant relationships among the variables of interest; job demands, job control, burnout, and ways of coping. There was a relationship between job title and physical job demands. There was no evidence to support a relationship between job title and psychological demands. Furthermore, there was a relationship between physical demands, emotional exhaustion and personal accomplishment; key indicators of burnout. Results showed significant correlations between individual ways of coping as a moderator between job structure, operationalized by job title, and individual employee burnout adding empirical evidence to the occupational stress literature. Based on the findings, there are implications for theory, research, and practice. For theory and research, the findings suggest the importance of incorporating transactional models in the study of occupational stress. In the area of practice, the findings highlight the importance of enriching jobs, increasing job control, and providing individual-level training related to stress reduction.