Time, Cost, and Environmental Impact Analysis for Sustainable Design at Multiple Building Levels

Construction projects are complex endeavors that require the involvement of different professional disciplines in order to meet various project objectives that are often conflicting. The level of complexity and the multi-objective nature of construction projects lend themselves to collaborative design and construction such as integrated project delivery (IPD), in which relevant disciplines work together during project conception, design and construction. Traditionally, the main objectives of construction projects have been to build in the least amount of time with the lowest cost possible, thus the inherent and well-established relationship between cost and time has been the focus of many studies. The importance of being able to effectively model relationships among multiple objectives in building construction has been emphasized in a wide range of research. In general, the trade-off relationship between time and cost is well understood and there is ample research on the subject. However, despite sustainable building designs, relationships between time and environmental impact, as well as cost and environmental impact, have not been fully investigated. The objectives of this research were mainly to analyze and identify relationships of time, cost, and environmental impact, in terms of CO2 emissions, at different levels of a building: material level, component level, and building level, at the pre-use phase, including manufacturing and construction, and the relationships of life cycle cost and life cycle CO2 emissions at the usage phase. Additionally, this research aimed to develop a robust simulation-based multi-objective decision-support tool, called SimulEICon, which took construction data uncertainty into account, and was capable of incorporating life cycle assessment information to the decision-making process. The findings of this research supported the trade-off relationship between time and cost at different building levels. Moreover, the time and CO2 emissions relationship presented trade-off behavior at the pre-use phase. The results of the relationship between cost and CO2 emissions were interestingly proportional at the pre-use phase. The same pattern continually presented after the construction to the usage phase. Understanding the relationships between those objectives is a key in successfully planning and designing environmentally sustainable construction projects.

Business process quantitative analysis and optimization for service industries

The total time a customer spends in the business process system, called the customer cycle-time, is a major contributor to overall customer satisfaction. Business process analysts and designers are frequently asked to design process solutions with optimal performance. Simulation models have been very popular to quantitatively evaluate the business processes; however, simulation is time-consuming and it also requires extensive modeling experiences to develop simulation models. Moreover, simulation models neither provide recommendations nor yield optimal solutions for business process design. A queueing network model is a good analytical approach toward business process analysis and design, and can provide a useful abstraction of a business process. However, the existing queueing network models were developed based on telephone systems or applied to manufacturing processes in which machine servers dominate the system. In a business process, the servers are usually people. The characteristics of human servers should be taken into account by the queueing model, i.e. specialization and coordination. ^ The research described in this dissertation develops an open queueing network model to do a quick analysis of business processes. Additionally, optimization models are developed to provide optimal business process designs. The queueing network model extends and improves upon existing multi-class open-queueing network models (MOQN) so that the customer flow in the human-server oriented processes can be modeled. The optimization models help business process designers to find the optimal design of a business process with consideration of specialization and coordination. ^ The main findings of the research are, first, parallelization can reduce the cycle-time for those customer classes that require more than one parallel activity; however, the coordination time due to the parallelization overwhelms the savings from parallelization under the high utilization servers since the waiting time significantly increases, thus the cycle-time increases. Third, the level of industrial technology employed by a company and coordination time to mange the tasks have strongest impact on the business process design; as the level of industrial technology employed by the company is high; more division is required to improve the cycle-time; as the coordination time required is high; consolidation is required to improve the cycle-time. ^

Development of an odor management plan for industrial stationary sources in an urban environment: A case study for Broward County, Florida

Objectionable odors remain at the top of air pollution complaints in urban areas such as Broward County that is subject to increasing residential and industrial developments. The odor complaints in Broward County escalated by 150 percent for the 2001 to 2004 period although the population increased by only 6 percent. It is estimated that in 2010 the population will increase to 2.5 million. Relying solely on enforcing the local odor ordinance is evidently not sufficient to manage the escalating odor complaint trends. An alternate approach similar to odor management plans (OMPs) that are successful in managing major malodor sources such as animal farms is required. ^ This study aims to develop and determine the feasibility of implementing a comprehensive odor management plan (COMP) for the entire Broward County. Unlike existing OMPs for single sources where the receptors (i.e. the complainants) are located beyond the boundary of the source, the COMP addresses a complex model of multiple sources and receptors coexisting within the boundary of the entire county. Each receptor is potentially subjected to malodor emissions from multiple sources within the county. Also, the quantity and quality of the source/receptor variables are continuously changing. ^ The results of this study show that it is feasible to develop a COMP that adopts a systematic procedure to: (1) Generate maps of existing odor complaint areas and malodor sources, (2) Identify potential odor sources (target sources) responsible for existing odor complaints, (3) Identify possible odor control strategies for target sources, (4) Determine the criteria for implementing odor control strategies, (5) Develop an odor complaint response protocol, and (6) Conduct odor impact analyses for new sources to prevent future odor related issues. Geographic Information System (GIS) is used to identify existing complaint areas. A COMP software that incorporates existing United States Environmental Protection Agency (EPA) air dispersion software is developed to determine the target sources, predict the likelihood of new complaints, and conduct odor impact analysis. The odor response protocol requires pre-planning field investigations and conducting surveys to optimize the local agency available resources while protecting the citizen's welfare, as required by the Clean Air Act. ^

Quantifying the Impacts of the Recent Economic Crisis on Regional Tourism Industry and Economy

The purpose of this study is to explore the accuracy issue of the Input-Output model in quantifying the impacts of the 2007 economic crisis on a local tourism industry and economy. Though the model has been used in the tourism impact analysis, its estimation accuracy is rarely verified empirically. The Metro Orlando area in Florida is investigated as an empirical study, and the negative change in visitor expenditure between 2007 and 2008 is taken as the direct shock. The total impacts are assessed in terms of output and employment, and are compared with the actual data. This study finds that there are surprisingly large discrepancies among the estimated and actual results, and the Input-Output model appears to overestimate the negative impacts. By investigating the local economic activities during the study period, this study made some exploratory efforts in explaining such discrepancies. Theoretical and practical implications are then suggested.

Quantifying the Impacts of the Recent Economic Crisis on a Regional Tourism Industry and Economy

The purpose of this study is to explore the accuracy issue of the Input-Output model in quantifying the impacts of the 2007 economic crisis on a local tourism industry and economy. Though the model has been used in the tourism impact analysis, its estimation accuracy is rarely verified empirically. The Metro Orlando area in Florida is investigated as an empirical study, and the negative change in visitor expenditure between 2007 and 2008 is taken as the direct shock. The total impacts are assessed in terms of output and employment, and are compared with the actual data. This study finds that there are surprisingly large discrepancies among the estimated and actual results, and the Input-Output model appears to overestimate the negative impacts. By investigating the local economic activities during the study period, this study made some exploratory efforts in explaining such discrepancies. Theoretical and practical implications are then suggested.

Three essays on a longitudinal analysis of business start-ups using the Kauffman Firm Survey

This dissertation focused on the longitudinal analysis of business start-ups using three waves of data from the Kauffman Firm Survey. ^ The first essay used the data from years 2004-2008, and examined the simultaneous relationship between a firm's capital structure, human resource policies, and its impact on the level of innovation. The firm leverage was calculated as, debt divided by total financial resources. Index of employee well-being was determined by a set of nine dichotomous questions asked in the survey. A negative binomial fixed effects model was used to analyze the effect of employee well-being and leverage on the count data of patents and copyrights, which were used as a proxy for innovation. The paper demonstrated that employee well-being positively affects the firm's innovation, while a higher leverage ratio had a negative impact on the innovation. No significant relation was found between leverage and employee well-being.^ The second essay used the data from years 2004-2009, and inquired whether a higher entrepreneurial speed of learning is desirable, and whether there is a linkage between the speed of learning and growth rate of the firm. The change in the speed of learning was measured using a pooled OLS estimator in repeated cross-sections. There was evidence of a declining speed of learning over time, and it was concluded that a higher speed of learning is not necessarily a good thing, because speed of learning is contingent on the entrepreneur's initial knowledge, and the precision of the signals he receives from the market. Also, there was no reason to expect speed of learning to be related to the growth of the firm in one direction over another.^ The third essay used the data from years 2004-2010, and determined the timing of diversification activities by the business start-ups. It captured when a start-up diversified for the first time, and explored the association between an early diversification strategy adopted by a firm, and its survival rate. A semi-parametric Cox proportional hazard model was used to examine the survival pattern. The results demonstrated that firms diversifying at an early stage in their lives show a higher survival rate; however, this effect fades over time.^

Three Essays on a Longitudinal Analysis of Business Start-ups using the Kauffman Firm Survey

This dissertation focused on the longitudinal analysis of business start-ups using three waves of data from the Kauffman Firm Survey. The first essay used the data from years 2004-2008, and examined the simultaneous relationship between a firm’s capital structure, human resource policies, and its impact on the level of innovation. The firm leverage was calculated as, debt divided by total financial resources. Index of employee well-being was determined by a set of nine dichotomous questions asked in the survey. A negative binomial fixed effects model was used to analyze the effect of employee well-being and leverage on the count data of patents and copyrights, which were used as a proxy for innovation. The paper demonstrated that employee well-being positively affects the firm's innovation, while a higher leverage ratio had a negative impact on the innovation. No significant relation was found between leverage and employee well-being. The second essay used the data from years 2004-2009, and inquired whether a higher entrepreneurial speed of learning is desirable, and whether there is a linkage between the speed of learning and growth rate of the firm. The change in the speed of learning was measured using a pooled OLS estimator in repeated cross-sections. There was evidence of a declining speed of learning over time, and it was concluded that a higher speed of learning is not necessarily a good thing, because speed of learning is contingent on the entrepreneur's initial knowledge, and the precision of the signals he receives from the market. Also, there was no reason to expect speed of learning to be related to the growth of the firm in one direction over another. The third essay used the data from years 2004-2010, and determined the timing of diversification activities by the business start-ups. It captured when a start-up diversified for the first time, and explored the association between an early diversification strategy adopted by a firm, and its survival rate. A semi-parametric Cox proportional hazard model was used to examine the survival pattern. The results demonstrated that firms diversifying at an early stage in their lives show a higher survival rate; however, this effect fades over time.

The development and analysis of a field project model curriculum and its impact on achievement and attitude toward science and the environment with at-risk eleventh and twelfth grade students

This study was an evaluation of a Field Project Model Curriculum and its impact on achievement, attitude toward science, attitude toward the environment, self-concept, and academic self-concept with at-risk eleventh and twelfth grade students. One hundred eight students were pretested and posttested on the Piers-Harris Children's Self-Concept Scale, PHCSC (1985); the Self-Concept as a Learner Scale, SCAL (1978); the Marine Science Test, MST (1987); the Science Attitude Inventory, SAI (1970); and the Environmental Attitude Scale, EAS (1972). Using a stratified random design, three groups of students were randomly assigned according to sex and stanine level, to three treatment groups. Group one received the field project method, group two received the field study method, and group three received the field trip method. All three groups followed the marine biology course content as specified by Florida Student Performance Objectives and Frameworks. The intervention occurred for ten months with each group participating in outside-of-classroom activities on a trimonthly basis. Analysis of covariance procedures were used to determine treatment effects. F-ratios, p-levels and t-tests at p $<$.0062 (.05/8) indicated that a significant difference existed among the three treatment groups. Findings indicated that groups one and two were significantly different from group three with group one displaying significantly higher results than group two. There were no significant differences between males and females in performance on the five dependent variables. The tenets underlying environmental education are congruent with the recommendations toward the reform of science education. These include a value analysis approach, inquiry methods, and critical thinking strategies that are applied to environmental issues. ^

An after tax economic analysis of home equity conversion for the elderly

The FHA program to insure reverse mortgages has brought additional attention to the use of home equity conversion to increase income to the elderly. Using simulation, this study compares the economic consequences of the FHA reverse mortgage with two alternative conversion vehicles: sale of a remainder interest and sale-leaseback. An FHA insured plan is devised for each vehicle, structured to represent fair substitutes for the FHA mortgage. In addition, the FHA mortgage is adjusted to allow for a 4 percent annual increase in distributions to the homeowner. The viability of each plan for the homeowner, the financial institution and the FHA is investigated using different assumptions for house appreciation, tax rates, and homeowners' initial ages. For the homeowner, the return of each vehicle is compared with the choice of not employing home equity conversion. The study examines the impact of tax and accounting rules on the selection of alternatives. The study investigates the sensitivity of the FHA model to some of its assumptions.^ Although none of the vehicles is Pareato optimal, the study shows that neither the sale of a remainder interest nor the sale-leaseback is a viable alternative vehicle to the homeowner. While each of these vehicles is profitable to the financial institution, the profits are not high enough to transfer benefits to the homeowner and still be workable. The effects of tax rate, house appreciation rate, and homeowner's initial age are surprisingly small. As a general rule, none of these factors materially impact the decision of either the homeowner or the financial institution. Tax and accounting rules were found to have minimal impact on the selection of vehicles. The sensitivity analysis indicates that none of the variables studied alone is likely to materially affect the FHA's profitability. ^

The impact of information technology on organizations: A study of enterprise resource planning system influences on job design and organizational culture

The primary purpose of this research is to study the linkage between perceived job design characteristics and information system environment characteristics before and after the replacement of a legacy information system with a new type of information system (referred to as an Enterprise Resource Planning or ERP system). A public state University implementing an academic version of an ERP system was selected for the study. Three survey instruments were used to examine the perception of the information system, the job characteristics, and the organizational culture before and after the system implementation. The research participants included two large departments resulting in a sample of 130 workers. Research questions were analyzed using multivariate procedures including factor analysis, path analysis, step-wise regression, and matched pair analysis. ^ Results indicated that the ERP system has introduced new elements into the working environment that has changed the perception of how the job design characteristics and organization culture dimensions are viewed by the workers. The understanding of how the perceived system characteristics align with an individual's perceived job design characteristics is supported by each of the system characteristics significantly correlated in the proposed direction. The stronger support of this relationship becomes visible in the causal flow of the effects seen in the path diagram and in the step-wise regression. The perceived job design characteristics aligning with dimensions of organizational culture are not as strong as the literature suggests. Although there are significant correlations between the job and culture variables, only one relationship can be seen in the causal flow. ^ This research has demonstrated that system characteristics of ERP do contribute to the perception of change in an organization and do support organizational culture behaviors and job characteristics. ^

Customer relationship management: A content analysis of issues and best practices

This dissertation is a study of customer relationship management theory and practice. Customer Relationship Management (CRM) is a business strategy whereby companies build strong relationships with existing and prospective customers with the goal of increasing organizational profitability. It is also a learning process involving managing change in processes, people, and technology. CRM implementation and its ramifications are also not completely understood as evidenced by the high number of failures in CRM implementation in organizations and the resulting disappointments. ^ The goal of this dissertation is to study emerging issues and trends in CRM, including the effect of computer software and the accompanying new management processes on organizations, and the dynamics of the alignment of marketing, sales and services, and all other functions responsible for delivering customers a satisfying experience. ^ In order to understand CRM better a content analysis of more than a hundred articles and documents from academic and industry sources was undertaken using a new methodological twist to the traditional method. An Internet domain name (http://crm.fiu.edu) was created for the purpose of this research by uploading an initial one hundred plus abstracts of articles and documents onto it to form a knowledge database. Once the database was formed a search engine was developed to enable the search of abstracts using relevant CRM keywords to reveal emergent dominant CRM topics. The ultimate aim of this website is to serve as an information hub for CRM research, as well as a search engine where interested parties can enter CRM-relevant keywords or phrases to access abstracts, as well as submit abstracts to enrich the knowledge hub. ^ Research questions were investigated and answered by content analyzing the interpretation and discussion of dominant CRM topics and then amalgamating the findings. This was supported by comparisons within and across individual, paired, and sets-of-three occurrences of CRM keywords in the article abstracts. ^ Results show that there is a lack of holistic thinking and discussion of CRM in both academics and industry which is required to understand how the people, process, and technology in CRM impact each other to affect successful implementation. Industry has to get their heads around CRM and holistically understand how these important dimensions affect each other. Only then will organizational learning occur, and overtime result in superior processes leading to strong profitable customer relationships and a hard to imitate competitive advantage. ^

Actionable pattern analysis in computing and business intelligence systems

With advances in science and technology, computing and business intelligence (BI) systems are steadily becoming more complex with an increasing variety of heterogeneous software and hardware components. They are thus becoming progressively more difficult to monitor, manage and maintain. Traditional approaches to system management have largely relied on domain experts through a knowledge acquisition process that translates domain knowledge into operating rules and policies. It is widely acknowledged as a cumbersome, labor intensive, and error prone process, besides being difficult to keep up with the rapidly changing environments. In addition, many traditional business systems deliver primarily pre-defined historic metrics for a long-term strategic or mid-term tactical analysis, and lack the necessary flexibility to support evolving metrics or data collection for real-time operational analysis. There is thus a pressing need for automatic and efficient approaches to monitor and manage complex computing and BI systems. To realize the goal of autonomic management and enable self-management capabilities, we propose to mine system historical log data generated by computing and BI systems, and automatically extract actionable patterns from this data. This dissertation focuses on the development of different data mining techniques to extract actionable patterns from various types of log data in computing and BI systems. Four key problems—Log data categorization and event summarization, Leading indicator identification , Pattern prioritization by exploring the link structures , and Tensor model for three-way log data are studied. Case studies and comprehensive experiments on real application scenarios and datasets are conducted to show the effectiveness of our proposed approaches.

Essays on the impact of stakeholders' sentiment on the financial decision making process

The most important factor that affects the decision making process in finance is the risk which is usually measured by variance (total risk) or systematic risk (beta). Since investors’ sentiment (whether she is an optimist or pessimist) plays a very important role in the choice of beta measure, any decision made for the same asset within the same time horizon will be different for different individuals. In other words, there will neither be homogeneity of beliefs nor the rational expectation prevalent in the market due to behavioral traits. This dissertation consists of three essays. In the first essay, “ Investor Sentiment and Intrinsic Stock Prices”, a new technical trading strategy was developed using a firm specific individual sentiment measure. This behavioral based trading strategy forecasts a range within which a stock price moves in a particular period and can be used for stock trading. Results indicate that sample firms trade within a range and give signals as to when to buy or sell. In the second essay, “Managerial Sentiment and the Value of the Firm”, examined the effect of managerial sentiment on the project selection process using net present value criterion and also effect of managerial sentiment on the value of firm. Final analysis reported that high sentiment and low sentiment managers obtain different values for the same firm before and after the acceptance of a project. Changes in the cost of capital, weighted cost of average capital were found due to managerial sentiment. In the last essay, “Investor Sentiment and Optimal Portfolio Selection”, analyzed how the investor sentiment affects the nature and composition of the optimal portfolio as well as the portfolio performance. Results suggested that the choice of the investor sentiment completely changes the portfolio composition, i.e., the high sentiment investor will have a completely different choice of assets in the portfolio in comparison with the low sentiment investor. The results indicated the practical application of behavioral model based technical indicator for stock trading. Additional insights developed include the valuation of firms with a behavioral component and the importance of distinguishing portfolio performance based on sentiment factors.

The impact of bandwidth in structured interviewing and criterion stability in predicting and assessing manager performance across transition and maintenance stages

The current study examined the role of three important components in the use of structured employment interviewing in performance prediction: construct bandwidth, observed communication skill, and the stability/dynamicity of performance criteria over time. A matched sample of 242 hospitality managers was derived from a field data set provided by a large hospitality management organization. Interview data and two years of performance appraisal data were provided. Bandwidth analysis demonstrated only minimal differences in prediction between matched predictor-criterion pairs compared with predictor to overall aggregate ratings (unmatched). The communication skill analysis revealed that this interviewer rated observation significantly predicted a number of the individual performance dimensions as well as overall performance over time. Of the five interview items, the strongest overall predictor of performance was interviewer rated communication skill. The stability/dynamicity analyses demonstrated the performance criteria to be generally stable over the two year period examined, which provides support for the long held notion that performance criteria is stabile over time. However, there were two exceptions. The interview dimension customer service orientation had shifting relationships over time with four of the criteria over the two year period. The performance criteria employee development also demonstrated some instability in its relationships with predictors. Thus, some evidence of dynamicity in performance criteria was revealed. Interestingly, both of the most noteworthy findings in the study involved items that were rated differently than the others in the study. The rated interview item communication skill and the rated performance criteria client satisfaction were ratings that involved a more direct level of observation. Additional analyses also revealed evidence of a general factor of performance. These two themes are more fully covered in the discussion.

An integrated multi-agent framework for optimizing time, cost and environmental impact of construction processes

Environmentally conscious construction has received a significant amount of research attention during the last decades. Even though construction literature is rich in studies that emphasize the importance of environmental impact during the construction phase, most of the previous studies failed to combine environmental analysis with other project performance criteria in construction. This is mainly because most of the studies have overlooked the multi-objective nature of construction projects. In order to achieve environmentally conscious construction, multi-objectives and their relationships need to be successfully analyzed in the complex construction environment. The complex construction system is composed of changing project conditions that have an impact on the relationship between time, cost and environmental impact (TCEI) of construction operations. Yet, this impact is still unknown by construction professionals. Studying this impact is vital to fulfill multiple project objectives and achieve environmentally conscious construction. This research proposes an analytical framework to analyze the impact of changing project conditions on the relationship of TCEI. This study includes green house gas (GHG) emissions as an environmental impact category. The methodology utilizes multi-agent systems, multi-objective optimization, analytical network process, and system dynamics tools to study the relationships of TCEI and support decision-making under the influence of project conditions. Life cycle assessment (LCA) is applied to the evaluation of environmental impact in terms of GHG. The mixed method approach allowed for the collection and analysis of qualitative and quantitative data. Structured interviews of professionals in the highway construction field were conducted to gain their perspectives in decision-making under the influence of certain project conditions, while the quantitative data were collected from the Florida Department of Transportation (FDOT) for highway resurfacing projects. The data collected were used to test the framework. The framework yielded statistically significant results in simulating project conditions and optimizing TCEI. The results showed that the change in project conditions had a significant impact on the TCEI optimal solutions. The correlation between TCEI suggested that they affected each other positively, but in different strengths. The findings of the study will assist contractors to visualize the impact of their decision on the relationship of TCEI.