A Multi-Criteria GIS-Based Route Selection Tool for Hazardous Material Transport: Consideration of Environmental Consequence, Traffic Congestions and Costs

Hazardous materials are substances that, if not regulated, can pose a threat to human populations and their environmental health, safety or property when transported in commerce. About 1.5 million tons of hazardous material shipments are transported by truck in the US annually, with a steady increase of approximately 5% per year. The objective of this study was to develop a routing tool for hazardous material transport in order to facilitate reduced environmental impacts and less transportation difficulties, yet would also find paths that were still compelling for the shipping carriers as a matter of trucking cost. The study started with identification of inhalation hazard impact zones and explosion protective areas around the location of hypothetical hazardous material releases, considering different parameters (i.e., chemicals characteristics, release quantities, atmospheric condition, etc.). Results showed that depending on the quantity of release, chemical, and atmospheric stability (a function of wind speed, meteorology, sky cover, time and location of accidents, etc.) the consequence of these incidents can differ. The study was extended by selection of other evaluation criteria for further investigation because health risk as an evaluation criterion would not be the only concern in selection of routes. Transportation difficulties (i.e., road blockage and congestion) were incorporated as important factor due to their indirect impact/cost on the users of transportation networks. Trucking costs were also considered as one of the primary criteria in selection of hazardous material paths; otherwise the suggested routes would have not been convincing for the shipping companies. The last but not least criterion was proximity of public places to the routes. The approach evolved from a simple framework to a complicated and efficient GIS-based tool able to investigate transportation networks of any given study area, and capable of generating best routing options for cargos. The suggested tool uses a multi-criteria-decision-making method, which considers the priorities of the decision makers in choosing the cargo routes. Comparison of the routing options based on each criterion and also the overall suitableness of the path in regards to all the criteria (using a multi-criteria-decision-making method) showed that using similar tools as the one proposed by this study can provide decision makers insights in the area of hazardous material transport. This tool shows the probable consequences of considering each path in a very easily understandable way; in the formats of maps and tables, which makes the tradeoffs of costs and risks considerably simpler, as in some cases slightly compromising on trucking cost may drastically decrease the probable health risk and/or traffic difficulties. This will not only be rewarding to the community by making cities safer places to live, but also can be beneficial to shipping companies by allowing them to advertise as environmental friendly conveyors.

A Look Back To Look Forward: New Patterns In The Supply/Demand Equation In The Lodging Industry

In his dialogue entitled - A Look Back to Look Forward: New Patterns In The Supply/Demand Equation In The Lodging Industry - by Albert J. Gomes, Senior Principal, Pannell Kerr Forster, Washington, D.C. What the author intends for you to know is the following: “Factors which influence the lodging industry in the United States are changing that industry as far as where hotels are being located, what clientele is being served, and what services are being provided at different facilities. The author charts these changes and makes predictions for the future.” Gomes initially alludes to the evolution of transportation – the human, animal, mechanical progression - and how those changes, in the last 100 years or so, have had a significant impact on the hotel industry. “A look back to look forward treats the past as prologue. American hoteliers are in for some startling changes in their business,” Gomes says. “The man who said that the three most important determinants for the success of a hotel were “location, location, location” did a lot of good only in the short run.” Gomes wants to make you aware of the existence of what he calls, “locational obsolescence.” “Locational obsolescence is a fact of life, and at least in the United States bears a direct correlation to evolutionary changes in transportation technology,” he says. “…the primary business of the hospitality industry is to serve travelers or people who are being transported,” Gomes expands the point. Tied to the transportation element, the author also points out an interesting distinction between hotels and motels. In addressing, “…what clientele is being served, and what services are being provided at different facilities,” Gomes suggests that the transportation factor influences these constituents as well. Also coupled with this discussion are oil prices and shifts in transportation habits, with reference to airline travel being an ever increasing method of travel; capturing much of the inter-city travel market. Gomes refers to airline deregulation as an impetus. The point being, it’s a fluid market rather than a static one, and [successful] hospitality properties need to be cognizant of market dynamics and be able to adjust to the variables in their marketplace. Gomes provides many facts and figures to bolster his assertions. Interestingly and perceptively, at the time of this writing, Gomes alludes to America’s deteriorating road and bridge network. As of right now, in 2009, this is a major issue. Gomes rounds out this study by comparing European hospitality trends to those in the U.S.

Community formation among Asian Indians in southeast Florida

Nearly one million Asian Indians have immigrated to the United States. Asian Indians are scattered across wide geographic areas. While some have chosen transnationalism, most are taking the traditional route of building ethnic communities. Using what the West has to offer in terms of communication and transportation technologies, they are constructing communities without geographic boundaries, with the extensive use of the automobile and air transportation, cellular phones, FAX machines, commercial delivery services, multi-party conference phones. Also, they are incorporating the American tradition of immigrant associations into an Asian Indian syncretism of community. In the process there emerges an Asian Indian identity and concept of kinship and community. ^

Capacity-based cost modeling for light rail and bus rapid transit systems

Choosing between Light Rail Transit (LRT) and Bus Rapid Transit (BRT) systems is often controversial and not an easy task for transportation planners who are contemplating the upgrade of their public transportation services. These two transit systems provide comparable services for medium-sized cities from the suburban neighborhood to the Central Business District (CBD) and utilize similar right-of-way (ROW) categories. The research is aimed at developing a method to assist transportation planners and decision makers in determining the most feasible system between LRT and BRT. ^ Cost estimation is a major factor when evaluating a transit system. Typically, LRT is more expensive to build and implement than BRT, but has significantly lower Operating and Maintenance (OM) costs than BRT. This dissertation examines the factors impacting capacity and costs, and develops cost models, which are a capacity-based cost estimate for the LRT and BRT systems. Various ROW categories and alignment configurations of the systems are also considered in the developed cost models. Kikuchi's fleet size model (1985) and cost allocation method are used to develop the cost models to estimate the capacity and costs. ^ The comparison between LRT and BRT are complicated due to many possible transportation planning and operation scenarios. In the end, a user-friendly computer interface integrated with the established capacity-based cost models, the LRT and BRT Cost Estimator (LBCostor), was developed by using Microsoft Visual Basic language to facilitate the process and will guide the users throughout the comparison operations. The cost models and the LBCostor can be used to analyze transit volumes, alignments, ROW configurations, number of stops and stations, headway, size of vehicle, and traffic signal timing at the intersections. The planners can make the necessary changes and adjustments depending on their operating practices. ^

A methodology to estimate time varying user responses to travel time and travel time reliability in a road pricing environment

Road pricing has emerged as an effective means of managing road traffic demand while simultaneously raising additional revenues to transportation agencies. Research on the factors that govern travel decisions has shown that user preferences may be a function of the demographic characteristics of the individuals and the perceived trip attributes. However, it is not clear what are the actual trip attributes considered in the travel decision- making process, how these attributes are perceived by travelers, and how the set of trip attributes change as a function of the time of the day or from day to day. In this study, operational Intelligent Transportation Systems (ITS) archives are mined and the aggregated preferences for a priced system are extracted at a fine time aggregation level for an extended number of days. The resulting information is related to corresponding time-varying trip attributes such as travel time, travel time reliability, charged toll, and other parameters. The time-varying user preferences and trip attributes are linked together by means of a binary choice model (Logit) with a linear utility function on trip attributes. The trip attributes weights in the utility function are then dynamically estimated for each time of day by means of an adaptive, limited-memory discrete Kalman filter (ALMF). The relationship between traveler choices and travel time is assessed using different rules to capture the logic that best represents the traveler perception and the effect of the real-time information on the observed preferences. The impact of travel time reliability on traveler choices is investigated considering its multiple definitions. It can be concluded based on the results that using the ALMF algorithm allows a robust estimation of time-varying weights in the utility function at fine time aggregation levels. The high correlations among the trip attributes severely constrain the simultaneous estimation of their weights in the utility function. Despite the data limitations, it is found that, the ALMF algorithm can provide stable estimates of the choice parameters for some periods of the day. Finally, it is found that the daily variation of the user sensitivities for different periods of the day resembles a well-defined normal distribution.